kernel/linux.git/drivers/usb/core/usb.h, branch v3.4.98

USB: unbind all interfaces before rebinding any

2014-05-06T14:51:45+00:00

commit 6aec044cc2f5670cf3b143c151c8be846499bd15 upstream. When a driver doesn't have pre_reset, post_reset, or reset_resume methods, the USB core unbinds that driver when its device undergoes a reset or a reset-resume, and then rebinds it afterward. The existing straightforward implementation can lead to problems, because each interface gets unbound and rebound before the next interface is handled. If a driver claims additional interfaces, the claim may fail because the old binding instance may still own the additional interface when the new instance tries to claim it. This patch fixes the problem by first unbinding all the interfaces that are marked (i.e., their needs_binding flag is set) and then rebinding all of them. The patch also makes the helper functions in driver.c a little more uniform and adjusts some out-of-date comments. Signed-off-by: Alan Stern Reported-and-tested-by: "Poulain, Loic" Signed-off-by: Greg Kroah-Hartman

usb: Add quirk detection based on interface information

2014-04-14T13:44:22+00:00

commit 80da2e0df5af700518611b7d1cc4fc9945bcaf95 upstream. When a whole class of devices (possibly from a specific vendor, or across multiple vendors) require a quirk, explictly listing all devices in the class make the quirks table unnecessarily large. Fix this by allowing matching devices based on interface information. Signed-off-by: Laurent Pinchart Acked-by: Alan Stern Signed-off-by: Ben Hutchings Cc: Yang Yingliang Signed-off-by: Greg Kroah-Hartman

USB: cleanup the handling of the PM complete call

2012-01-24T22:23:49+00:00

This eliminates the last instance of a function's behavior controlled by a parameter as Linus hates such things. Signed-off-by: Oliver Neukum Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

USB: move usb_translate_errors to linux/usb.h

2011-11-15T18:47:40+00:00

Move usb_translate_errors from usb core to linux/usb.h as it is meant to be accessed from drivers. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

xHCI: set USB2 hardware LPM

2011-09-26T22:51:10+00:00

If the device pass the USB2 software LPM and the host supports hardware LPM, enable hardware LPM for the device to let the host decide when to put the link into lower power state. If hardware LPM is enabled for a port and driver wants to put it into suspend, it must first disable hardware LPM, resume the port into U0, and then suspend the port. Signed-off-by: Andiry Xu Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman

usbcore: get BOS descriptor set

2011-09-26T22:51:08+00:00

This commit gets BOS(Binary Device Object Store) descriptor set for Super Speed devices and High Speed devices which support BOS descriptor. BOS descriptor is used to report additional USB device-level capabilities that are not reported via the Device descriptor. By getting BOS descriptor set, driver can check device's device-level capability such as LPM capability. Signed-off-by: Andiry Xu Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman

usb: core: Change usb_create_sysfs_intf_files()' return type to void

2011-04-30T00:24:38+00:00

The usb_create_sysfs_intf_files() function always returned zero even if it failed to create sysfs fails. Since this is a desired behaviour there is no need to return return code at all. This commit changes function's return type (form int) to void. Signed-off-by: Michal Nazarewicz Cc: Sergey Senozhatsky Signed-off-by: Greg Kroah-Hartman

USB: Move runtime PM callbacks to usb_device_pm_ops

2011-03-18T18:55:36+00:00

USB defines usb_device_type pointing to usb_device_pm_ops that provides system-wide PM callbacks only and usb_bus_type pointing to usb_bus_pm_ops that provides runtime PM callbacks only. However, the USB runtime PM callbacks may be defined in usb_device_pm_ops which makes it possible to drop usb_bus_pm_ops and will allow us to consolidate the handling of subsystems by the PM core code. Signed-off-by: Rafael J. Wysocki Acked-by: Greg Kroah-Hartman

USB: add helper to convert USB error codes

2011-01-23T03:35:38+00:00

This converts error codes specific to USB to generic error codes that can be returned to user space. Tests showed that it is so small that it is better inlined. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman

USB: use the runtime-PM autosuspend implementation

2010-11-16T22:03:41+00:00

This patch (as1428) converts USB over to the new runtime-PM core autosuspend framework. One slightly awkward aspect of the conversion is that USB devices will now have two suspend-delay attributes: the old power/autosuspend file and the new power/autosuspend_delay_ms file. One expresses the delay time in seconds and the other in milliseconds, but otherwise they do the same thing. The old attribute can be deprecated and then removed eventually. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman