kernel/linux.git/drivers/usb/core/hub.h, branch v5.16

usb: core: reduce power-on-good delay time of root hub

2021-04-10T08:45:48+00:00

Return the exactly delay time given by root hub descriptor, this helps to reduce resume time etc. Due to the root hub descriptor is usually provided by the host controller driver, if there is compatibility for a root hub, we can fix it easily without affect other root hub Acked-by: Alan Stern Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/1618017645-12259-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman

USB: core: Use the correct style for SPDX License Identifier

2020-04-16T12:32:45+00:00

This patch corrects the SPDX License Identifier style in header files related to USB Core. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used). Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches Signed-off-by: Nishad Kamdar Link: https://lore.kernel.org/r/20200328091844.GA3648@nishad Signed-off-by: Greg Kroah-Hartman

USB: hub: Fix the broken detection of USB3 device in SMSC hub

2020-02-10T19:08:26+00:00

Renesas R-Car H3ULCB + Kingfisher Infotainment Board is either not able to detect the USB3.0 mass storage devices or is detecting those as USB2.0 high speed devices. The explanation given by Renesas is that, due to a HW issue, the XHCI driver does not wake up after going to sleep on connecting a USB3.0 device. In order to mitigate that, disable the auto-suspend feature specifically for SMSC hubs from hub_probe() function, as a quirk. Renesas Kingfisher Infotainment Board has two USB3.0 ports (CN2) which are connected via USB5534B 4-port SuperSpeed/Hi-Speed, low-power, configurable hub controller. [1] SanDisk USB 3.0 device detected as USB-2.0 before the patch [ 74.036390] usb 5-1.1: new high-speed USB device number 4 using xhci-hcd [ 74.061598] usb 5-1.1: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00 [ 74.069976] usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 74.077303] usb 5-1.1: Product: Ultra [ 74.080980] usb 5-1.1: Manufacturer: SanDisk [ 74.085263] usb 5-1.1: SerialNumber: 4C530001110208116550 [2] SanDisk USB 3.0 device detected as USB-3.0 after the patch [ 34.565078] usb 6-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd [ 34.588719] usb 6-1.1: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00 [ 34.597098] usb 6-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 34.604430] usb 6-1.1: Product: Ultra [ 34.608110] usb 6-1.1: Manufacturer: SanDisk [ 34.612397] usb 6-1.1: SerialNumber: 4C530001110208116550 Suggested-by: Alan Stern Signed-off-by: Hardik Gajjar Acked-by: Alan Stern Tested-by: Eugeniu Rosca Cc: stable Link: https://lore.kernel.org/r/1580989763-32291-1-git-send-email-hgajjar@de.adit-jv.com Signed-off-by: Greg Kroah-Hartman

usb: hub: add retry routine after intr URB submit error

2019-01-18T08:58:04+00:00

The hub sends hot-plug events to the host trough it's interrupt URB. The driver takes care of completing the URB and re-submitting it. Completion errors are handled in the hub_event() work, yet submission errors are ignored, rendering the device unresponsive. All further events are lost. It is fairly hard to find this issue in the wild, since you have to time the USB hot-plug event with the URB submission failure. For instance it could be the system running out of memory or some malfunction in the USB controller driver. Nevertheless, it's pretty reasonable to think it'll happen sometime. One can trigger this issue using eBPF's function override feature (see BCC's inject.py script). This patch adds a retry routine to the event of a submission error. The HUB driver will try to re-submit the URB once every second until it's successful or the HUB is disconnected. As some USB subsystems already take care of this issue, the implementation was inspired from usbhid/hid_core.c's. Signed-off-by: Nicolas Saenz Julienne Reviewed-by: Oliver Neukum Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

usb: hub: Per-port setting to use old enumeration scheme

2018-05-31T10:48:17+00:00

The "old" enumeration scheme is considerably faster (it takes ~244ms instead of ~356ms to get the descriptor). It is currently only possible to use the old scheme globally (/sys/module/usbcore/parameters/old_scheme_first), which is not desirable as the new scheme was introduced to increase compatibility with more devices. However, in our case, we care about time-to-active for a specific USB device (which we make the firmware for), on a specific port (that is pogo-pin based: not a standard USB port). This new sysfs option makes it possible to use the old scheme on a single port only. Signed-off-by: Nicolas Boichat Signed-off-by: Greg Kroah-Hartman

usb: core: introduce per-port over-current counters

2018-03-22T12:07:05+00:00

For some userspace applications information on the number of over-current conditions at specific USB hub ports is relevant. In our case we have a series of USB hardware (using the cp210x driver) which communicates using a proprietary protocol. These devices sometimes trigger an over-current situation on some hubs. In case of such an over-current situation the USB devices offer an interface for reducing the max used power. As these conditions are quite rare and imply performance reductions of the device we don't want to reduce the max power always. Therefore give user-space applications the possibility to react adequately by introducing an over_current_counter in the usb port struct which is exported via sysfs. Signed-off-by: Richard Leitner Signed-off-by: Greg Kroah-Hartman

USB: core: Remove redundant license text

2017-11-04T10:55:39+00:00

Now that the SPDX tag is in all USB files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Signed-off-by: Greg Kroah-Hartman Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

USB: add SPDX identifiers to all remaining files in drivers/usb/

2017-11-04T10:48:02+00:00

It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/usb/ and include/linux/usb* files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Thomas Gleixner Cc: Kate Stewart Cc: Philippe Ombredanne Signed-off-by: Greg Kroah-Hartman Acked-by: Felipe Balbi Acked-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

usb: Support USB 3.1 extended port status request

2016-01-25T04:16:52+00:00

usb 3.1 extend the hub get-port-status request by adding different request types. the new request types return 4 additional bytes called extended port status, these bytes are returned after the regular portstatus and portchange values. The extended port status contains a speed ID for the currently used sublink speed. A table of supported Speed IDs with details about the link is provided by the hub in the device descriptor BOS SuperSpeedPlus device capability Sublink Speed Attributes. Support this new request. Ask for the extended port status after port reset if hub supports USB 3.1. If link is running at SuperSpeedPlus set the device speed to USB_SPEED_SUPER_PLUS Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman

usb: core: lpm: add sysfs node for usb3 lpm permit

2015-12-01T22:58:18+00:00

USB3 LPM is default on in Linux kernel if both xHCI host controller and the USB devices declare to be LPM-capable. Unfortunately, some devices are known to work well with LPM disabled, but to be broken if LPM is enabled, although it declares the LPM capability. Users won't be able to use this kind of devices, until someone puts them in the kernel blacklist and gets the kernel upgraded. This patch adds a sysfs node to permit or forbit USB3 LPM U1 or U2 entry for a port. The settings apply to both before and after device enumeration. Supported values are "0" - neither u1 nor u2 permitted, "u1" - only u1 is permitted, "u2" - only u2 is permitted, "u1_u2" - both u1 and u2 are permitted. With this interface, users can use an LPM-unfriendly USB device on a released Linux kernel. Signed-off-by: Lu Baolu Signed-off-by: Zhuang Jin Can Signed-off-by: Greg Kroah-Hartman