kernel/linux.git/drivers/usb/core/hcd.c, branch v4.19.39

Merge 4.17-rc3 into usb-next

2018-04-30T11:58:51+00:00

This resolves the merge issue with drivers/usb/core/hcd.c Reported-by: Stephen Rothwell Signed-off-by: Greg Kroah-Hartman

usb: core: hcd: mark expected switch fall-through

2018-04-23T13:21:26+00:00

In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1468266 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva Signed-off-by: Greg Kroah-Hartman

usb: set root hub lane counts

2018-04-22T14:19:26+00:00

Set the the rx_lane and tx_lane count to "2" for USB 3.2 hosts. For all other older hosts set the default lane counts to 1 Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman

usb: define HCD_USB32 speed option for hosts that support USB 3.2 dual-lane

2018-04-22T14:10:15+00:00

Hosts that support USB 3.2 Enhaned SuperSpeed can set their hcd speed to HCD_USB32 to let usb core and host drivers know that the controller supports new USB 3.2 dual-lane features. make sure usb core handle HCD_USB32 hosts correctly, for now similar to HCD_USB32. Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman

USB: core: hcd: drop support for legacy phys

2018-04-22T13:58:23+00:00

Drop support for looking up and initialising legacy phys in USB core, something which hasn't been used by a mainline kernel since commit 9080b8dc761a ("ARM: OMAP2+: Remove legacy usb-host.c platform init code"). Specifically, since that commit usb_get_phy_dev() have always returned -ENODEV and consequently this code has not been used. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

usb: core: use phy_exit during suspend if wake up is not supported

2018-04-22T13:01:30+00:00

If the USB controller can wake up the system (which is the case for example with the Mediatek USB3 IP) then we must not call phy_exit during suspend to ensure that the USB controller doesn't have to re-enumerate the devices during resume. However, if the USB controller cannot wake up the system (which is the case for example on various TI platforms using a dwc3 controller) then we must call phy_exit during suspend. Otherwise the PHY driver keeps the clocks enabled, which prevents the system from reaching the lowest power levels in the suspend state. Solve this by introducing two new functions in the PHY wrapper which are dedicated to the suspend and resume handling. If the controller can wake up the system the new usb_phy_roothub_suspend function will simply call usb_phy_roothub_power_off. However, if wake up is not supported by the controller it will also call usb_phy_roothub_exit. The also new usb_phy_roothub_resume function takes care of calling usb_phy_roothub_init (if the controller can't wake up the system) in addition to usb_phy_roothub_power_on. Fixes: 07dbff0ddbd86c ("usb: core: add a wrapper for the USB PHYs on the HCD") Fixes: 178a0bce05cbc1 ("usb: core: hcd: integrate the PHY wrapper into the HCD core") Reported-by: Roger Quadros Suggested-by: Roger Quadros Suggested-by: Chunfeng Yun Signed-off-by: Martin Blumenstingl Tested-by: Chunfeng Yun Reviewed-by: Roger Quadros Tested-by: Keerthy Signed-off-by: Greg Kroah-Hartman

usb: core: split usb_phy_roothub_{init,alloc}

2018-04-22T13:01:30+00:00

Before this patch usb_phy_roothub_init served two purposes (from a caller's point of view - like hcd.c): - parsing the PHYs and allocating the list entries - calling phy_init on each list entry While this worked so far it has one disadvantage: if we need to call phy_init for each PHY instance then the existing code cannot be re-used. Solve this by splitting off usb_phy_roothub_alloc which only parses the PHYs and allocates the list entries. usb_phy_roothub_init then gets a struct usb_phy_roothub and only calls phy_init on each PHY instance (along with the corresponding cleanup if that failed somewhere). This is a preparation step for adding proper suspend support for some hardware that requires phy_exit to be called during suspend and phy_init to be called during resume. Signed-off-by: Martin Blumenstingl Tested-by: Chunfeng Yun Reviewed-by: Roger Quadros Tested-by: Keerthy Signed-off-by: Greg Kroah-Hartman

USB: Increment wakeup count on remote wakeup.

2018-04-22T12:45:11+00:00

On chromebooks we depend on wakeup count to identify the wakeup source. But currently USB devices do not increment the wakeup count when they trigger the remote wake. This patch addresses the same. Resume condition is reported differently on USB 2.0 and USB 3.0 devices. On USB 2.0 devices, a wake capable device, if wake enabled, drives resume signal to indicate a remote wake (USB 2.0 spec section 7.1.7.7). The upstream facing port then sets C_PORT_SUSPEND bit and reports a port change event (USB 2.0 spec section 11.24.2.7.2.3). Thus if a port has resumed before driving the resume signal from the host and C_PORT_SUSPEND is set, then the device attached to the given port might be the reason for the last system wakeup. Increment the wakeup count for the same. On USB 3.0 devices, a function may signal that it wants to exit from device suspend by sending a Function Wake Device Notification to the host (USB3.0 spec section 8.5.6.4) Thus on receiving the Function Wake, increment the wakeup count. Signed-off-by: Ravi Chandra Sadineni Acked-by: Alan Stern Cc: stable Signed-off-by: Greg Kroah-Hartman

usb: skip phys initialization of shared hcd

2018-03-22T12:53:33+00:00

The phys has already been initialized when add primary hcd, including usb2 phys and usb3 phys also if exist, so needn't re-parse "phys" property again. Signed-off-by: Chunfeng Yun Reviewed-by: Roger Quadros Signed-off-by: Greg Kroah-Hartman

usb: core: hcd: remove support for initializing a single PHY

2018-03-09T17:43:53+00:00

With the new PHY wrapper in place we can now handle multiple PHYs. Remove the code which handles only one generic PHY as this is now covered (with support for multiple PHYs as well as suspend/resume support) by the new PHY wrapper. Signed-off-by: Martin Blumenstingl Tested-by: Neil Armstrong Signed-off-by: Greg Kroah-Hartman