kernel/linux.git/drivers/usb/class, branch v4.19.16

usb: cdc-acm: send ZLP for Telit 3G Intel based modems

2019-01-16T21:04:31+00:00

commit 34aabf918717dd14e05051896aaecd3b16b53d95 upstream. Telit 3G Intel based modems require zero packet to be sent if out data size is equal to the endpoint max packet size. Signed-off-by: Daniele Palmas Cc: stable Signed-off-by: Greg Kroah-Hartman

cdc-acm: fix abnormal DATA RX issue for Mediatek Preloader.

2019-01-09T16:38:45+00:00

commit eafb27fa5283599ce6c5492ea18cf636a28222bb upstream. Mediatek Preloader is a proprietary embedded boot loader for loading Little Kernel and Linux into device DRAM. This boot loader also handle firmware update. Mediatek Preloader will be enumerated as a virtual COM port when the device is connected to Windows or Linux OS via CDC-ACM class driver. When the USB enumeration has been done, Mediatek Preloader will send out handshake command "READY" to PC actively instead of waiting command from the download tool. Since Linux 4.12, the commit "tty: reset termios state on device registration" (93857edd9829e144acb6c7e72d593f6e01aead66) causes Mediatek Preloader receiving some abnoraml command like "READYXX" as it sent. This will be recognized as an incorrect response. The behavior change also causes the download handshake fail. This change only affects subsequent connects if the reconnected device happens to get the same minor number. By disabling the ECHO termios flag could avoid this problem. However, it cannot be done by user space configuration when download tool open /dev/ttyACM0. This is because the device running Mediatek Preloader will send handshake command "READY" immediately once the CDC-ACM driver is ready. This patch wants to fix above problem by introducing "DISABLE_ECHO" property in driver_info. When Mediatek Preloader is connected, the CDC-ACM driver could disable ECHO flag in termios to avoid the problem. Signed-off-by: Macpaul Lin Cc: stable@vger.kernel.org Reviewed-by: Johan Hovold Acked-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman

usb: cdc-acm: add entry for Hiro (Conexant) modem

2018-11-27T15:13:09+00:00

commit 63529eaa6164ef7ab4b907b25ac3648177e5e78f upstream. The cdc-acm kernel module currently does not support the Hiro (Conexant) H05228 USB modem. The patch below adds the device specific information: idVendor 0x0572 idProduct 0x1349 Signed-off-by: Maarten Jacobs Acked-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman

cdc-acm: correct counting of UART states in serial state notification

2018-10-09T14:13:42+00:00

The usb standard ("Universal Serial Bus Class Definitions for Communication Devices") distiguishes between "consistent signals" (DSR, DCD), and "irregular signals" (break, ring, parity error, framing error, overrun). The bits of "irregular signals" are set, if this error/event occurred on the device side and are immeadeatly unset, if the serial state notification was sent. Like other drivers of real serial ports do, just the occurence of those events should be counted in serial_icounter_struct (but no 1->0 transitions). Signed-off-by: Tobias Herzog Acked-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman

cdc-acm: do not reset notification buffer index upon urb unlinking

2018-10-09T14:13:42+00:00

Resetting the write index of the notification buffer on urb unlink (e.g. closing a cdc-acm device from userspace) may lead to wrong interpretation of further received notifications, in case the index is not 0 when urb unlink happens (i.e. when parts of a notification already have been transferred). On the device side there is no "reset" of the notification transimission and thus we would get out of sync with the device. Signed-off-by: Tobias Herzog Acked-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman

cdc-acm: fix race between reset and control messaging

2018-10-09T14:13:42+00:00

If a device splits up a control message and a reset() happens between the parts, the message is lost and already recieved parts must be dropped. Signed-off-by: Oliver Neukum Fixes: 1aba579f3cf51 ("cdc-acm: handle read pipe errors") Cc: stable Signed-off-by: Greg Kroah-Hartman

usb: cdc_acm: Do not leak URB buffers

2018-10-02T00:59:02+00:00

When the ACM TTY port is disconnected, the URBs it uses must be killed, and then the buffers must be freed. Unfortunately a previous refactor removed the code freeing the buffers because it looked extremely similar to the code killing the URBs. As a result, there were many new leaks for each plug/unplug cycle of a CDC-ACM device, that were detected by kmemleak. Restore the missing code, and the memory leak is removed. Fixes: ba8c931ded8d ("cdc-acm: refactor killing urbs") Signed-off-by: Romain Izard Acked-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman

Revert "usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt()"

2018-09-20T10:47:41+00:00

This reverts commit 6e22e3af7bb3a7b9dc53cb4687659f6e63fca427. The bug the patch describes to, has been already fixed in commit 2df6948428542 ("USB: cdc-wdm: don't enable interrupts in USB-giveback") so need to this, revert it. Fixes: 6e22e3af7bb3 ("usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt()") Cc: stable Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Greg Kroah-Hartman

Revert "cdc-acm: implement put_char() and flush_chars()"

2018-09-10T18:40:29+00:00

This reverts commit a81cf9799ad7299b03a4dff020d9685f9ac5f3e0. The patch causes a regression, which I cannot find the reason for. So let's revert for now, as a revert hurts only performance. Original report: I was trying to resolve the problem with Oliver but we don't get any conclusion for 5 months, so I am now sending this to mail list and cdc_acm authors. I am using simple request-response protocol to obtain the boiller parameters in constant intervals. A simple one transaction is: 1. opening the /dev/ttyACM0 2. sending the following 10-bytes request to the device: unsigned char req[] = {0x02, 0xfe, 0x01, 0x05, 0x08, 0x02, 0x01, 0x69, 0xab, 0x03}; 3. reading response (frame of 74 bytes length). 4. closing the descriptor I am doing this transaction with 5 seconds intervals. Before the bad commit everything was working correctly: I've got a requests and a responses in a timely manner. After the bad commit more time I am using the kernel module, more problems I have. The graph [2] is showing the problem. As you can see after module load all seems fine but after about 30 minutes I've got a plenty of EAGAINs when doing read()'s and trying to read back the data. When I rmmod and insmod the cdc_acm module again, then the situation is starting over again: running ok shortly after load, and more time it is running, more EAGAINs I have when calling read(). As a bonus I can see the problem on the device itself: The device is configured as you can see here on this screen [3]. It has two transmision LEDs: TX and RX. Blink duration is set for 100ms. This is a recording before the bad commit when all is working fine: [4] And this is with the bad commit: [5] As you can see the TX led is blinking wrongly long (indicating transmission?) and I have problems doing read() calls (EAGAIN). Reported-by: Mariusz Bialonczyk Signed-off-by: Oliver Neukum Fixes: a81cf9799ad7 ("cdc-acm: implement put_char() and flush_chars()") Cc: stable Signed-off-by: Greg Kroah-Hartman

usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt()

2018-09-05T12:48:40+00:00

wdm_in_callback() is a completion handler function for the USB driver. So it should not sleep. But it calls service_outstanding_interrupt(), which calls usb_submit_urb() with GFP_KERNEL. To fix this bug, GFP_KERNEL is replaced with GFP_ATOMIC. This bug is found by my static analysis tool DSAC. Signed-off-by: Jia-Ju Bai Cc: stable Signed-off-by: Greg Kroah-Hartman