kernel/linux.git/drivers/usb/chipidea, branch v6.1.87

usb: chipidea: wait controller resume finished for wakeup irq

2024-01-25T23:27:40+00:00

commit 128d849074d05545becf86e713715ce7676fc074 upstream. After the chipidea driver introduce extcon for id and vbus, it's able to wakeup from another irq source, in case the system with extcon ID cable, wakeup from usb ID cable and device removal, the usb device disconnect irq may come firstly before the extcon notifier while system resume, so we will get 2 "wakeup" irq, one for usb device disconnect; and one for extcon ID cable change(real wakeup event), current driver treat them as 2 successive wakeup irq so can't handle it correctly, then finally the usb irq can't be enabled. This patch adds a check to bypass further usb events before controller resume finished to fix it. Fixes: 1f874edcb731 ("usb: chipidea: add runtime power management support") cc: Acked-by: Peter Chen Signed-off-by: Xu Yang Signed-off-by: Li Jun Link: https://lore.kernel.org/r/20231228110753.1755756-2-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman

usb: chipidea: Simplify Tegra DMA alignment code

2023-11-20T10:52:10+00:00

[ Upstream commit 2ae61a2562c0d1720545b0845829a65fb6a9c2c6 ] The USB host on Tegra3 works with 32-bit alignment. Previous code tried to align the buffer, but it did align the wrapper struct instead, so the buffer was at a constant offset of 8 bytes (two pointers) from expected alignment. Since kmalloc() guarantees at least 8-byte alignment already, the alignment-extending is removed. Fixes: fc53d5279094 ("usb: chipidea: tegra: Support host mode") Signed-off-by: Michał Mirosław Link: https://lore.kernel.org/r/a0d917d492b1f91ee0019e68b8e8bca9c585393f.1695934946.git.mirq-linux@rere.qmqm.pl Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: chipidea: Fix DMA overwrite for Tegra

2023-11-20T10:52:10+00:00

[ Upstream commit 7ab8716713c931ac79988f2592e1cf8b2e4fec1b ] Tegra USB controllers seem to issue DMA in full 32-bit words only and thus may overwrite unevenly-sized buffers. One such occurrence is detected by SLUB when receiving a reply to a 1-byte buffer (below). Fix this by allocating a bounce buffer also for buffers with sizes not a multiple of 4. ============================================================================= BUG kmalloc-64 (Tainted: G B ): kmalloc Redzone overwritten ----------------------------------------------------------------------------- 0x8555cd02-0x8555cd03 @offset=3330. First byte 0x0 instead of 0xcc Allocated in usb_get_status+0x2b/0xac age=1 cpu=3 pid=41 __kmem_cache_alloc_node+0x12f/0x1e4 __kmalloc+0x33/0x8c usb_get_status+0x2b/0xac hub_probe+0x5e9/0xcec usb_probe_interface+0xbf/0x21c really_probe+0xa5/0x2c4 __driver_probe_device+0x75/0x174 driver_probe_device+0x31/0x94 __device_attach_driver+0x65/0xc0 bus_for_each_drv+0x4b/0x74 __device_attach+0x69/0x120 bus_probe_device+0x65/0x6c device_add+0x48b/0x5f8 usb_set_configuration+0x37b/0x6b4 usb_generic_driver_probe+0x37/0x68 usb_probe_device+0x35/0xb4 Slab 0xbf622b80 objects=21 used=18 fp=0x8555cdc0 flags=0x800(slab|zone=0) Object 0x8555cd00 @offset=3328 fp=0x00000000 Redzone 8555ccc0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ Redzone 8555ccd0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ Redzone 8555cce0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ Redzone 8555ccf0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ Object 8555cd00: 01 00 00 00 cc cc cc cc cc cc cc cc cc cc cc cc ................ Object 8555cd10: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ Object 8555cd20: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ Object 8555cd30: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ Redzone 8555cd40: cc cc cc cc .... Padding 8555cd74: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZ CPU: 3 PID: 41 Comm: kworker/3:1 Tainted: G B 6.6.0-rc1mq-00118-g59786f827ea1 #1115 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) Workqueue: usb_hub_wq hub_event [<8010ca28>] (unwind_backtrace) from [<801090a5>] (show_stack+0x11/0x14) [<801090a5>] (show_stack) from [<805da2fb>] (dump_stack_lvl+0x4d/0x7c) [<805da2fb>] (dump_stack_lvl) from [<8026464f>] (check_bytes_and_report+0xb3/0xe4) [<8026464f>] (check_bytes_and_report) from [<802648e1>] (check_object+0x261/0x290) [<802648e1>] (check_object) from [<802671b1>] (free_to_partial_list+0x105/0x3f8) [<802671b1>] (free_to_partial_list) from [<80268613>] (__kmem_cache_free+0x103/0x128) [<80268613>] (__kmem_cache_free) from [<80425a67>] (usb_get_status+0x73/0xac) [<80425a67>] (usb_get_status) from [<80421b31>] (hub_probe+0x5e9/0xcec) [<80421b31>] (hub_probe) from [<80428bbb>] (usb_probe_interface+0xbf/0x21c) [<80428bbb>] (usb_probe_interface) from [<803ee13d>] (really_probe+0xa5/0x2c4) [<803ee13d>] (really_probe) from [<803ee3d1>] (__driver_probe_device+0x75/0x174) [<803ee3d1>] (__driver_probe_device) from [<803ee501>] (driver_probe_device+0x31/0x94) usb 1-1: device descriptor read/8, error -71 Fixes: fc53d5279094 ("usb: chipidea: tegra: Support host mode") Signed-off-by: Michał Mirosław Link: https://lore.kernel.org/r/ef8466b834c1726f5404c95c3e192e90460146f8.1695934946.git.mirq-linux@rere.qmqm.pl Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: chipidea: add workaround for chipidea PEC bug

2023-09-23T09:11:07+00:00

[ Upstream commit 12e6ac69cc7e7d3367599ae26a92a0f9a18bc728 ] Some NXP processors using ChipIdea USB IP have a bug when frame babble is detected. Issue description: In USB camera test, our controller is host in HS mode. In ISOC IN, when device sends data across the micro frame, it causes the babble in host controller. This will clear the PE bit. In spec, it also requires to set the PEC bit and then set the PCI bit. Without the PCI interrupt, the software does not know the PE is cleared. This will add a flag CI_HDRC_HAS_PORTSC_PEC_MISSED to some impacted platform datas. And the ehci host driver will assert PEC by SW when specific conditions are satisfied. Signed-off-by: Xu Yang Link: https://lore.kernel.org/r/20230809024432.535160-2-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: chipidea: imx: improve logic if samsung,picophy-* parameter is 0

2023-09-06T20:27:01+00:00

commit 36668515d56bf73f06765c71e08c8f7465f1e5c4 upstream. In current driver, the value of tuning parameter will not take effect if samsung,picophy-* is assigned as 0. Because 0 is also a valid value acccording to the description of USB_PHY_CFG1 register, this will improve the logic to let it work. Fixes: 58a3cefb3840 ("usb: chipidea: imx: add two samsung picophy parameters tuning implementation") cc: Signed-off-by: Xu Yang Acked-by: Peter Chen Link: https://lore.kernel.org/r/20230627112126.1882666-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman

usb: chipidea: imx: add missing USB PHY DPDM wakeup setting

2023-08-23T15:52:24+00:00

[ Upstream commit 53d061c19dc4cb68409df6dc11c40389c8c42a75 ] USB PHY DPDM wakeup bit is enabled by default, when USB wakeup is not required(/sys/.../wakeup is disabled), this bit should be disabled, otherwise we will have unexpected wakeup if do USB device connect/disconnect while system sleep. This bit can be enabled for both host and device mode. Signed-off-by: Li Jun Signed-off-by: Xu Yang Acked-by: Peter Chen Message-ID: <20230517081907.3410465-3-xu.yang_2@nxp.com> Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: chipidea: imx: don't request QoS for imx8ulp

2023-08-23T15:52:24+00:00

[ Upstream commit 9a070e8e208995a9d638b538ed7abf28bd6ea6f0 ] Use dedicated imx8ulp usb compatible to remove QoS request since imx8ulp has no such limitation of imx7ulp: DMA will not work if system enters idle. Signed-off-by: Xu Yang Signed-off-by: Li Jun Acked-by: Peter Chen Message-ID: <20230530104007.1294702-2-xu.yang_2@nxp.com> Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: chipidea: fix missing goto in `ci_hdrc_probe`

2023-05-11T14:03:30+00:00

[ Upstream commit d6f712f53b79f5017cdcefafb7a5aea9ec52da5d ] From the comment of ci_usb_phy_init, it returns an error code if usb_phy_init has failed, and it should do some clean up, not just return directly. Fix this by goto the error handling. Fixes: 74475ede784d ("usb: chipidea: move PHY operation to core") Reviewed-by: Dongliang Mu Acked-by: Peter Chen Signed-off-by: Yinhao Hu Link: https://lore.kernel.org/r/20230412055852.971991-1-dddddd@hust.edu.cn Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: chipidea: core: fix possible concurrent when switch role

2023-03-30T10:49:24+00:00

commit 451b15ed138ec15bffbebb58a00ebdd884c3e659 upstream. The user may call role_store() when driver is handling ci_handle_id_switch() which is triggerred by otg event or power lost event. Unfortunately, the controller may go into chaos in this case. Fix this by protecting it with mutex lock. Fixes: a932a8041ff9 ("usb: chipidea: core: add sysfs group") cc: Acked-by: Peter Chen Signed-off-by: Xu Yang Link: https://lore.kernel.org/r/20230317061516.2451728-2-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman

usb: chipdea: core: fix return -EINVAL if request role is the same with current role

2023-03-30T10:49:24+00:00

commit 3670de80678961eda7fa2220883fc77c16868951 upstream. It should not return -EINVAL if the request role is the same with current role, return non-error and without do anything instead. Fixes: a932a8041ff9 ("usb: chipidea: core: add sysfs group") cc: Acked-by: Peter Chen Signed-off-by: Xu Yang Link: https://lore.kernel.org/r/20230317061516.2451728-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman