kernel/linux.git/drivers/usb/chipidea, branch v4.19.77

usb: chipidea: udc: don't do hardware access if gadget has stopped

2019-09-06T08:22:15+00:00

commit cbe85c88ce80fb92956a0793518d415864dcead8 upstream. After _gadget_stop_activity is executed, we can consider the hardware operation for gadget has finished, and the udc can be stopped and enter low power mode. So, any later hardware operations (from usb_ep_ops APIs or usb_gadget_ops APIs) should be considered invalid, any deinitializatons has been covered at _gadget_stop_activity. I meet this problem when I plug out usb cable from PC using mass_storage gadget, my callstack like: vbus interrupt->.vbus_session-> composite_disconnect ->pm_runtime_put_sync(&_gadget->dev), the composite_disconnect will call fsg_disable, but fsg_disable calls usb_ep_disable using async way, there are register accesses for usb_ep_disable. So sometimes, I get system hang due to visit register without clock, sometimes not. The Linux Kernel USB maintainer Alan Stern suggests this kinds of solution. See: http://marc.info/?l=linux-usb&m=138541769810983&w=2. Cc: #v4.9+ Signed-off-by: Peter Chen Link: https://lore.kernel.org/r/20190820020503.27080-2-peter.chen@nxp.com Signed-off-by: Greg Kroah-Hartman

usb: chipidea: udc: workaround for endpoint conflict issue

2019-06-25T03:35:53+00:00

commit c19dffc0a9511a7d7493ec21019aefd97e9a111b upstream. An endpoint conflict occurs when the USB is working in device mode during an isochronous communication. When the endpointA IN direction is an isochronous IN endpoint, and the host sends an IN token to endpointA on another device, then the OUT transaction may be missed regardless the OUT endpoint number. Generally, this occurs when the device is connected to the host through a hub and other devices are connected to the same hub. The affected OUT endpoint can be either control, bulk, isochronous, or an interrupt endpoint. After the OUT endpoint is primed, if an IN token to the same endpoint number on another device is received, then the OUT endpoint may be unprimed (cannot be detected by software), which causes this endpoint to no longer respond to the host OUT token, and thus, no corresponding interrupt occurs. There is no good workaround for this issue, the only thing the software could do is numbering isochronous IN from the highest endpoint since we have observed most of device number endpoint from the lowest. Cc: #v3.14+ Cc: Fabio Estevam Cc: Greg KH Cc: Sergei Shtylyov Cc: Jun Li Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman

usb: chipidea: Grab the (legacy) USB PHY by phandle first

2019-04-05T20:33:01+00:00

[ Upstream commit 68ef236274793066b9ba3154b16c0acc1c891e5c ] According to the chipidea driver bindings, the USB PHY is specified via the "phys" phandle node. However, this only takes effect for USB PHYs that use the common PHY framework. For legacy USB PHYs, a simple lookup based on the USB PHY type is done instead. This does not play out well when more than one USB PHY is registered, since the first registered PHY matching the type will always be returned regardless of what the driver was bound to. Fix this by looking up the PHY based on the "phys" phandle node. Although generic PHYs are rather matched by their "phys-name" and not the "phys" phandle directly, there is no helper for similar lookup on legacy PHYs and it's probably not worth the effort to add it. When no legacy USB PHY is found by phandle, fallback to grabbing any registered USB2 PHY. This ensures backward compatibility if some users were actually relying on this mechanism. Signed-off-by: Paul Kocialkowski Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: chipidea: tegra: Fix missed ci_hdrc_remove_device()

2019-03-23T19:10:04+00:00

commit 563b9372f7ec57e44e8f9a8600c5107d7ffdd166 upstream. The ChipIdea's platform device need to be unregistered on Tegra's driver module removal. Fixes: dfebb5f43a78827a ("usb: chipidea: Add support for Tegra20/30/114/124") Signed-off-by: Dmitry Osipenko Acked-by: Peter Chen Cc: stable Signed-off-by: Greg Kroah-Hartman

usb: chipidea: Prevent unbalanced IRQ disable

2018-11-13T19:08:36+00:00

[ Upstream commit 8b97d73c4d72a2abf58f8e49062a7ee1e5f1334e ] The ChipIdea IRQ is disabled before scheduling the otg work and re-enabled on otg work completion. However if the job is already scheduled we have to undo the effect of disable_irq int order to balance the IRQ disable-depth value. Fixes: be6b0c1bd0be ("usb: chipidea: using one inline function to cover queue work operations") Signed-off-by: Loic Poulain Signed-off-by: Peter Chen Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Merge 4.18-rc7 into usb-next

2018-07-30T08:04:58+00:00

We want the USB fixes in here as well to handle merge issues. Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-ci-v4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next

2018-07-28T12:55:31+00:00

Peter writes: One patch to enable USB Ethernet gadget at Tegra platforms

usb: chipidea: Always build ULPI code

2018-07-05T06:22:47+00:00

Commit 03e6275ae381 ("usb: chipidea: Fix ULPI on imx51") causes a kernel hang on imx51 systems that use the ULPI interface and do not select the CONFIG_USB_CHIPIDEA_ULPI option. In order to avoid such potential misuse, let's always build the chipidea ULPI code into the final ci_hdrc object. Tested on a imx51-babbage board. Fixes: 03e6275ae381 ("usb: chipidea: Fix ULPI on imx51") Signed-off-by: Fabio Estevam Signed-off-by: Peter Chen

usb: chipidea: tegra: Use aligned DMA on Tegra114/124

2018-06-26T02:15:31+00:00

USB Ethernet gadget now works on Tegra114 and Tegra124. Similar to commit 061e20e9899e ("usb: chipidea: tegra: Use aligned DMA on Tegra30"). Signed-off-by: Marcel Ziswiler Signed-off-by: Peter Chen

usb: chipidea: host: fix disconnection detect issue

2018-06-26T01:59:34+00:00

The commit 4e88d4c08301 ("usb: add a flag to skip PHY initialization to struct usb_hcd") delete the assignment for hcd->usb_phy, it causes usb_phy_notify_connect{disconnect) are not called, the USB PHY driver is not notified of hot plug event, then the disconnection will not be detected by hardware. Fixes: 4e88d4c08301 ("usb: add a flag to skip PHY initialization to struct usb_hcd") Acked-by: Martin Blumenstingl Reported-by: Mats Karrman Tested-by: Mats Karrman Signed-off-by: Peter Chen