kernel/linux.git/drivers/usb/chipidea/udc.c, branch linux-4.4.y

usb: chipidea: udc: workaround for endpoint conflict issue

2019-07-10T07:56:31+00:00

commit c19dffc0a9511a7d7493ec21019aefd97e9a111b upstream. An endpoint conflict occurs when the USB is working in device mode during an isochronous communication. When the endpointA IN direction is an isochronous IN endpoint, and the host sends an IN token to endpointA on another device, then the OUT transaction may be missed regardless the OUT endpoint number. Generally, this occurs when the device is connected to the host through a hub and other devices are connected to the same hub. The affected OUT endpoint can be either control, bulk, isochronous, or an interrupt endpoint. After the OUT endpoint is primed, if an IN token to the same endpoint number on another device is received, then the OUT endpoint may be unprimed (cannot be detected by software), which causes this endpoint to no longer respond to the host OUT token, and thus, no corresponding interrupt occurs. There is no good workaround for this issue, the only thing the software could do is numbering isochronous IN from the highest endpoint since we have observed most of device number endpoint from the lowest. Cc: #v3.14+ Cc: Fabio Estevam Cc: Greg KH Cc: Sergei Shtylyov Cc: Jun Li Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman

usb: chipidea: udc: fix NULL pointer dereference if udc_start failed

2017-06-14T11:16:22+00:00

commit aa1f058d7d9244423b8c5a75b9484b1115df7f02 upstream. Fix below NULL pointer dereference. we set ci->roles[CI_ROLE_GADGET] too early in ci_hdrc_gadget_init(), if udc_start() fails due to some reason, the ci->roles[CI_ROLE_GADGET] check in ci_hdrc_gadget_destroy can't protect us. We fix this issue by only setting ci->roles[CI_ROLE_GADGET] if udc_start() succeed. [ 1.398550] Unable to handle kernel NULL pointer dereference at virtual address 00000000 ... [ 1.448600] PC is at dma_pool_free+0xb8/0xf0 [ 1.453012] LR is at dma_pool_free+0x28/0xf0 [ 2.113369] [] dma_pool_free+0xb8/0xf0 [ 2.118857] [] destroy_eps+0x4c/0x68 [ 2.124165] [] ci_hdrc_gadget_destroy+0x28/0x50 [ 2.130461] [] ci_hdrc_probe+0x588/0x7e8 [ 2.136129] [] platform_drv_probe+0x50/0xb8 [ 2.142066] [] driver_probe_device+0x1fc/0x2a8 [ 2.148270] [] __device_attach_driver+0x9c/0xf8 [ 2.154563] [] bus_for_each_drv+0x58/0x98 [ 2.160317] [] __device_attach+0xc4/0x138 [ 2.166072] [] device_initial_probe+0x10/0x18 [ 2.172185] [] bus_probe_device+0x94/0xa0 [ 2.177940] [] device_add+0x3f0/0x560 [ 2.183337] [] platform_device_add+0x180/0x240 [ 2.189541] [] ci_hdrc_add_device+0x440/0x4f8 [ 2.195654] [] ci_hdrc_usb2_probe+0x13c/0x2d8 [ 2.201769] [] platform_drv_probe+0x50/0xb8 [ 2.207705] [] driver_probe_device+0x1fc/0x2a8 [ 2.213910] [] __driver_attach+0xac/0xb0 [ 2.219575] [] bus_for_each_dev+0x60/0xa0 [ 2.225329] [] driver_attach+0x20/0x28 [ 2.230816] [] bus_add_driver+0x1d0/0x238 [ 2.236571] [] driver_register+0x60/0xf8 [ 2.242237] [] __platform_driver_register+0x44/0x50 [ 2.248891] [] ci_hdrc_usb2_driver_init+0x18/0x20 [ 2.255365] [] do_one_initcall+0x38/0x128 [ 2.261121] [] kernel_init_freeable+0x1ac/0x250 [ 2.267414] [] kernel_init+0x10/0x100 [ 2.272810] [] ret_from_fork+0x10/0x50 Fixes: 3f124d233e97 ("usb: chipidea: add role init and destroy APIs") Signed-off-by: Jisheng Zhang Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman

usb: chipidea: move the lock initialization to core file

2016-12-02T08:09:00+00:00

commit a5d906bb261cde5f881a949d3b0fbaa285dcc574 upstream. This can fix below dump when the lock is accessed at host mode due to it is not initialized. [ 46.119638] INFO: trying to register non-static key. [ 46.124643] the code is fine but needs lockdep annotation. [ 46.130144] turning off the locking correctness validator. [ 46.135659] CPU: 0 PID: 690 Comm: cat Not tainted 4.9.0-rc3-00079-g4b75f1d #1210 [ 46.143075] Hardware name: Freescale i.MX6 SoloX (Device Tree) [ 46.148923] Backtrace: [ 46.151448] [] (dump_backtrace) from [] (show_stack+0x18/0x1c) [ 46.159038] r7:edf52000 [ 46.161412] r6:60000193 [ 46.163967] r5:00000000 [ 46.165035] r4:c0e25c2c [ 46.169109] [] (show_stack) from [] (dump_stack+0xb4/0xe8) [ 46.176362] [] (dump_stack) from [] (register_lock_class+0x4fc/0x56c) [ 46.184554] r10:c0e25d24 [ 46.187014] r9:edf53e70 [ 46.189569] r8:c1642444 [ 46.190637] r7:ee9da024 [ 46.193191] r6:00000000 [ 46.194258] r5:00000000 [ 46.196812] r4:00000000 [ 46.199185] r3:00000001 [ 46.203259] [] (register_lock_class) from [] (__lock_acquire+0x80/0x10f0) [ 46.211797] r10:c0e25d24 [ 46.214257] r9:edf53e70 [ 46.216813] r8:ee9da024 [ 46.217880] r7:c1642444 [ 46.220435] r6:edcd1800 [ 46.221502] r5:60000193 [ 46.224057] r4:00000000 [ 46.227953] [] (__lock_acquire) from [] (lock_acquire+0x74/0x94) [ 46.235710] r10:00000001 [ 46.238169] r9:edf53e70 [ 46.240723] r8:edf53f80 [ 46.241790] r7:00000001 [ 46.244344] r6:00000001 [ 46.245412] r5:60000193 [ 46.247966] r4:00000000 [ 46.251866] [] (lock_acquire) from [] (_raw_spin_lock_irqsave+0x40/0x54) [ 46.260319] r7:ee1c6a00 [ 46.262691] r6:c062a570 [ 46.265247] r5:20000113 [ 46.266314] r4:ee9da014 [ 46.270393] [] (_raw_spin_lock_irqsave) from [] (ci_port_test_show+0x2c/0x70) [ 46.279280] r6:eebd2000 [ 46.281652] r5:ee9da010 [ 46.284207] r4:ee9da014 [ 46.286810] [] (ci_port_test_show) from [] (seq_read+0x1ac/0x4f8) [ 46.294655] r9:edf53e70 [ 46.297028] r8:edf53f80 [ 46.299583] r7:ee1c6a00 [ 46.300650] r6:00000001 [ 46.303205] r5:00000000 [ 46.304273] r4:eebd2000 [ 46.306850] [] (seq_read) from [] (full_proxy_read+0x54/0x6c) [ 46.314348] r10:00000000 [ 46.316808] r9:c0a6ad30 [ 46.319363] r8:edf53f80 [ 46.320430] r7:00020000 [ 46.322986] r6:b6de3000 [ 46.324053] r5:ee1c6a00 [ 46.326607] r4:c0248b58 [ 46.330505] [] (full_proxy_read) from [] (__vfs_read+0x34/0x118) [ 46.338262] r9:edf52000 [ 46.340635] r8:c0107fc4 [ 46.343190] r7:00020000 [ 46.344257] r6:edf53f80 [ 46.346812] r5:c039e810 [ 46.347879] r4:ee1c6a00 [ 46.350447] [] (__vfs_read) from [] (vfs_read+0x8c/0x11c) [ 46.357597] r9:edf52000 [ 46.359969] r8:c0107fc4 [ 46.362524] r7:edf53f80 [ 46.363592] r6:b6de3000 [ 46.366147] r5:ee1c6a00 [ 46.367214] r4:00020000 [ 46.369782] [] (vfs_read) from [] (SyS_read+0x4c/0xa8) [ 46.376672] r8:c0107fc4 [ 46.379045] r7:00020000 [ 46.381600] r6:b6de3000 [ 46.382667] r5:ee1c6a00 [ 46.385222] r4:ee1c6a00 [ 46.387817] [] (SyS_read) from [] (ret_fast_syscall+0x0/0x1c) [ 46.395314] r7:00000003 [ 46.397687] r6:b6de3000 [ 46.400243] r5:00020000 [ 46.401310] r4:00020000 Fixes: 26c696c678c4 ("USB: Chipidea: rename struct ci13xxx variables from udc to ci") Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman

usb: chipidea: udc: fix NULL ptr dereference in isr_setup_status_phase

2016-09-24T08:07:39+00:00

commit 6f3c4fb6d05e63c9c6d8968302491c3a5457be61 upstream. Problems with the signal integrity of the high speed USB data lines or noise on reference ground lines can cause the i.MX6 USB controller to violate USB specs and exhibit unexpected behavior. It was observed that USBi_UI interrupts were triggered first and when isr_setup_status_phase was called, ci->status was NULL, which lead to a NULL pointer dereference kernel panic. This patch fixes the kernel panic, emits a warning once and returns -EPIPE to halt the device and let the host get stalled. It also adds a comment to point people, who are experiencing this issue, to their USB hardware design. Signed-off-by: Clemens Gruber Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman

usb: chipidea: udc: don't touch DP when controller is in host mode

2016-09-07T06:32:44+00:00

commit c4e94174983a86c935be1537a73e496b778b0287 upstream. When the controller is configured to be dual role and it's in host mode, if bind udc and gadgt driver, those gadget operations will do gadget disconnect and finally pull down DP line, which will break host function. Signed-off-by: Li Jun Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman

usb: chipidea: otg: gadget module load and unload support

2015-11-18T06:07:54+00:00

This patch is to support load and unload gadget driver in full OTG mode. Signed-off-by: Li Jun Signed-off-by: Peter Chen Tested-by: Jiada Wang Cc: #v4.0+

usb: chipidea: udc: using the correct stall implementation

2015-09-15T08:08:28+00:00

According to spec, there are functional and protocol stalls. For functional stall, it is for bulk and interrupt endpoints, below are cases for it: - Host sends SET_FEATURE request for Set-Halt, the udc driver needs to set stall, and return true unconditionally. - The gadget driver may call usb_ep_set_halt to stall certain endpoints, if there is a transfer in pending, the udc driver should not set stall, and return -EAGAIN accordingly. These two kinds of stall need to be cleared by host using CLEAR_FEATURE request (Clear-Halt). For protocol stall, it is for control endpoint, this stall will be set if the control request has failed. This stall will be cleared by next setup request (hardware will do it). It fixed usbtest (drivers/usb/misc/usbtest.c) Test 13 "set/clear halt" test failure, meanwhile, this change has been verified by USB2 CV Compliance Test and MSC Tests. Cc: #3.10+ Cc: Alan Stern Cc: Felipe Balbi Signed-off-by: Peter Chen

Merge tag 'usb-ci-v4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next

2015-08-14T23:43:09+00:00

Peter writes: USB: chipidea updates for v4.3-rc1 The main changes are adding several system interfaces for tuning performance, and each vendors can adjust them according to their design configurations. Others are tiny improvements, like more well siTD supports, USB_DEVICE_A_HNP_SUPPORT supports, etc.

usb: chipidea: udc: zero-length packet is only needed for TX

2015-08-14T01:16:46+00:00

The zero-length packet is the sendor tells the receiver that there is no more data, so it is only needed at the TX side. Signed-off-by: Peter Chen

usb: chipidea: udc: add USB_DEVICE_A_HNP_SUPPORT request support

2015-08-14T01:13:10+00:00

We can support USB OTG 1.3 USB_DEVICE_A_HNP_SUPPORT request when the driver supports OTG FSM mode. Signed-off-by: Peter Chen