kernel/linux.git/drivers/usb/chipidea/core.c, branch v6.2

usb: chipidea: core: fix possible constant 0 if use IS_ERR(ci->role_switch)

2023-01-17T16:05:02+00:00

After successfully probed, ci->role_switch would only be NULL or a valid pointer. IS_ERR(ci->role_switch) will always return 0. So no need to wrap it with IS_ERR, otherwise the logic is wrong. Fixes: e1b5d2bed67c ("usb: chipidea: core: handle usb role switch in a common way") cc: Signed-off-by: Xu Yang Link: https://lore.kernel.org/r/20221215055409.3760523-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman

usb: chipidea: core: wrap ci_handle_power_lost() with CONFIG_PM_SLEEP

2022-11-09T11:37:44+00:00

If CONFIG_PM_SLEEP is not set, the following error will be shown up when build kernel: error: 'ci_handle_power_lost' defined but not used. This will move ci_handle_power_lost() to an area wrapped by CONFIG_PM_SLEEP. Signed-off-by: Xu Yang Fixes: 74494b33211d ("usb: chipidea: core: add controller resume support when controller is powered off") Reported-by: Conor Dooley Tested-by: Conor Dooley Link: https://lore.kernel.org/r/20221026121157.1491302-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman

usb: chipidea: core: handle suspend/resume for each role

2022-10-23T12:34:53+00:00

There may be a need to handle suspend/resume per role. This patch will add this support. Signed-off-by: Xu Yang Acked-by: Peter Chen Link: https://lore.kernel.org/r/20221013151442.3262951-3-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman

usb: chipidea: core: add controller resume support when controller is powered off

2022-10-23T12:34:53+00:00

For some SoCs, the controler's power will be off during the system suspend, and it needs some recovery operation to let the system back to workable. We add this support in this patch. Signed-off-by: Xu Yang Acked-by: Peter Chen Link: https://lore.kernel.org/r/20221013151442.3262951-2-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman

usb: chipidea: core: handle usb role switch in a common way

2022-10-23T12:34:52+00:00

Currently, ci_usb_role_switch_set() may be called before system resume stage when suspended. Worse yet, ci_hdrc device may stay at RPM_ACTIVE state which will cause pm_runtime_get_sync() fail to resume the device. In this case, role-switch may unable to complete transition process due to not exit from lpm state or due to lack some means after system resume. Same as ci_cable_notifier(), usb_role_switch could handle its events based on ci_hdrc_cable mechanism. Signed-off-by: Xu Yang Link: https://lore.kernel.org/r/20221009155336.766960-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman

usb: chipidea: udc: implement get_frame

2022-06-21T14:40:51+00:00

The chipidea udc core is capable of reading the current frame index from hardware. This patch adds the get_frame callback to the driver. Acked-by: Peter Chen Signed-off-by: Michael Grzeschik Link: https://lore.kernel.org/r/20220616194459.2981519-1-m.grzeschik@pengutronix.de Signed-off-by: Greg Kroah-Hartman

usb: chipidea: Set the DT node on the child device

2021-12-17T15:52:27+00:00

The ChipIdea glue drivers just copy the glue resources to the "ci_hdrc" child device. Instead, set the child device's DT node pointer to the parent device's node so that platform_get_irq() can find the IRQ resources in the DT. This removes the need for statically populating the IRQ resources from the DT which has been deprecated for some time. Acked-by: Peter Chen Signed-off-by: Rob Herring Link: https://lore.kernel.org/r/20211215225646.1997946-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman

USB: chipidea: fix interrupt deadlock

2021-10-22T09:14:12+00:00

Chipidea core was calling the interrupt handler from non-IRQ context with interrupts enabled, something which can lead to a deadlock if there's an actual interrupt trying to take a lock that's already held (e.g. the controller lock in udc_irq()). Add a wrapper that can be used to fake interrupts instead of calling the handler directly. Fixes: 3ecb3e09b042 ("usb: chipidea: Use extcon framework for VBUS and ID detect") Fixes: 876d4e1e8298 ("usb: chipidea: core: add wakeup support for extcon") Cc: Peter Chen Cc: stable@vger.kernel.org # 4.4 Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20211021083447.20078-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman

usb: chipidea: core: Fix incorrectly documented function 'ci_usb_phy_exit()'

2021-05-27T07:43:44+00:00

Fixes the following W=1 kernel build warning(s): drivers/usb/chipidea/core.c:343: warning: expecting prototype for _ci_usb_phy_exit(). Prototype was for ci_usb_phy_exit() instead Cc: Peter Chen Cc: Greg Kroah-Hartman Cc: Liam Girdwood Cc: Mark Brown Cc: David Lopo Cc: linux-usb@vger.kernel.org Acked-by: Peter Chen Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20210526130037.856068-14-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman

usb: chipidea: tegra: Support host mode

2021-01-13T10:26:34+00:00

Add USB host mode to the Tegra HDRC driver. This allows us to benefit from support provided by the generic ChipIdea driver instead of duplicating the effort in a separate ehci-tegra driver. Tested-by: Matt Merhar Tested-by: Nicolas Chauvet Tested-by: Ion Agorria Acked-by: Thierry Reding Acked-by: Peter Chen Signed-off-by: Peter Geis Signed-off-by: Dmitry Osipenko Link: https://lore.kernel.org/r/20201218120246.7759-6-digetx@gmail.com Signed-off-by: Greg Kroah-Hartman