kernel/linux.git/drivers/usb/chipidea/core.c, branch v6.19.12

Merge tag 'usb-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2025-12-07T02:42:12+00:00

Pull USB/Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt driver updates for 6.19-rc1. Nothing major here, just lots of tiny updates for most of the common USB drivers. Included in here are: - more xhci driver updates and fixes - Thunderbolt driver cleanups - usb serial driver updates - typec driver updates - USB tracepoint additions - dwc3 driver updates, including support for Apple hardware - lots of other smaller driver updates and cleanups All of these have been in linux-next for a while with no reported issues" * tag 'usb-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (161 commits) usb: gadget: tegra-xudc: Always reinitialize data toggle when clear halt USB: serial: option: move Telit 0x10c7 composition in the right place USB: serial: option: add Telit Cinterion FE910C04 new compositions usb: typec: ucsi: fix use-after-free caused by uec->work usb: typec: ucsi: fix probe failure in gaokun_ucsi_probe() usb: dwc3: core: Remove redundant comment in core init usb: phy: Initialize struct usb_phy list_head USB: serial: option: add Foxconn T99W760 usb: usb-storage: No additional quirks need to be added to the EL-R12 optical drive. usb: typec: hd3ss3220: Enable VBUS based on ID pin state dt-bindings: usb: ti,hd3ss3220: Add support for VBUS based on ID state usb: typec: anx7411: add WQ_PERCPU to alloc_workqueue users USB: add WQ_PERCPU to alloc_workqueue users dt-bindings: usb: dwc3-xilinx: Describe the reset constraint for the versal platform drivers/usb/storage: use min() instead of min_t() usb: raw-gadget: cap raw_io transfer length to KMALLOC_MAX_SIZE usb: ohci-da8xx: remove unused platform data usb: gadget: functionfs: use dma_buf_unmap_attachment_unlocked() helper usb: uas: reduce time under spinlock usb: dwc3: eic7700: Add EIC7700 USB driver ...

usb: Remove redundant pm_runtime_mark_last_busy() calls

2025-11-21T14:11:53+00:00

pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(), pm_runtime_autosuspend() and pm_request_autosuspend() now include a call to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to pm_runtime_mark_last_busy(). Signed-off-by: Sakari Ailus Acked-by: Thierry Reding Reviewed-by: AngeloGioacchino Del Regno Acked-by: Peter Chen Link: https://patch.msgid.link/20251111095117.95023-1-sakari.ailus@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: chipidea: core: detach power domain for ci_hdrc platform device

2025-11-19T17:06:49+00:00

When add a platform device by calling ci_hdrc_add_device(), this device will reuse OF node of its parent device. If power-domains property is provided in the OF node, both two platform devices will be attached to the same power domain. This should be unnecessary and may bring other inconsistent behavior. For example, to support wakeup capability, these two platform device need different power domain state. The parent device need NOT power domain on for out-band interrupt, but the ci_hdrc device need power domain on for in-band interrupt. The i.MX95 Soc support out-band wakeup interrupt, the user need to enable wakeup for the parent device, but if the user also enable wakeup for ci_hdrc device, the power domain will keep at on state finally. To exclude such inconsistent behavior and simplify the power management, detach power domain for ci_hdrc platform device. Reviewed-by: Ulf Hansson Signed-off-by: Xu Yang Acked-by: Peter Chen Tested-by: Xu Yang Signed-off-by: Ulf Hansson

usb: Use (of|device)_property_present() for non-boolean properties

2024-11-05T12:29:26+00:00

The use of (of|device)_property_read_bool() for non-boolean properties is deprecated in favor of of_property_present() when testing for property presence. Signed-off-by: Rob Herring (Arm) Acked-by: Peter Chen Acked-by: Thinh Nguyen Link: https://lore.kernel.org/r/20241104190820.277702-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman

usb: chipidea: add CI_HDRC_HAS_SHORT_PKT_LIMIT flag

2024-10-04T13:13:58+00:00

Currently, the imx deivice controller has below limitations: 1. can't generate short packet interrupt if IOC not set in dTD. So if one request span more than one dTDs and only the last dTD set IOC, the usb request will pending there if no more data comes. 2. the controller can't accurately deliver data to differtent usb requests in some cases due to short packet. For example: one usb request span 3 dTDs, then if the controller received a short packet the next packet will go to 2nd dTD of current request rather than the first dTD of next request. 3. can't build a bus packet use multiple dTDs. For example: controller needs to send one packet of 512 bytes use dTD1 (200 bytes) + dTD2 (312 bytes), actually the host side will see 200 bytes short packet. Based on these limits, add CI_HDRC_HAS_SHORT_PKT_LIMIT flag and use it on imx platforms. Signed-off-by: Xu Yang Acked-by: Peter Chen Link: https://lore.kernel.org/r/20240923081203.2851768-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman

usb: Switch back to struct platform_driver::remove()

2024-10-04T13:13:03+00:00

After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all platform drivers below drivers/usb to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20240924084329.53094-2-u.kleine-koenig@baylibre.com Signed-off-by: Greg Kroah-Hartman

Revert "usb: chipidea: move ci_ulpi_init after the phy initialization"

2024-06-04T12:51:09+00:00

This reverts commit 22ffd399e6e7aa18ae0314278ed0b7f05f8ab679. People report this commit causes the driver defer probed, and never back to work[1][2]. [1] https://lore.kernel.org/lkml/20240407011913.GA168730@nchen-desktop/T/#mc2b93bc11a8b01ec7cd0d0bf6b0b03951d9ef751 [2] https://lore.kernel.org/lkml/20240407011913.GA168730@nchen-desktop/T/#me87d9a2a76c07619d83b3879ea14780da89fbbbf Cc: Michael Grzeschik Cc: Marek Szyprowski Cc: Wouter Franken Signed-off-by: Peter Chen Link: https://lore.kernel.org/r/20240517023648.3459188-1-peter.chen@kernel.org Signed-off-by: Greg Kroah-Hartman

usb: chipidea: move ci_ulpi_init after the phy initialization

2024-04-09T15:38:03+00:00

The function ci_usb_phy_init is already handling the hw_phymode_configure path which is also only possible after we have a valid phy. So we move the ci_ulpi_init after the phy initialization to be really sure to be able to communicate with the ulpi phy. Signed-off-by: Michael Grzeschik Acked-by: Peter Chen Link: https://lore.kernel.org/r/20240328-chipidea-phy-misc-v1-1-907d9de5d4df@pengutronix.de Signed-off-by: Greg Kroah-Hartman

usb: chipidea: core: handle power lost in workqueue

2024-01-28T00:39:14+00:00

When power is recycled in usb controller during system power management, the controller will recognize it and switch role if role has been changed during power lost. In current design, it will be completed in resume() function. However, this may bring issues since usb class devices have their pm operations too and these device's resume() functions are still not being called at this point. When usb controller recognized host role should be stopped, these usb class devices will be removed at this point. But these usb class devices can't be removed in some cases, such as scsi devices. Since scsi driver may sync data to U-disk, however it will block there because scsi drvier can only handle pm request when is in suspended state. Therefore, there may exist a dependency between ci_resume() and usb class device's resume(). To break this potential dependency, we need to handle power lost work in a workqueue. Fixes: 74494b33211d ("usb: chipidea: core: add controller resume support when controller is powered off") cc: stable@vger.kernel.org Signed-off-by: Xu Yang Link: https://lore.kernel.org/r/20240119123537.3614838-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman

usb: chipidea: wait controller resume finished for wakeup irq

2024-01-04T15:01:56+00:00

After the chipidea driver introduce extcon for id and vbus, it's able to wakeup from another irq source, in case the system with extcon ID cable, wakeup from usb ID cable and device removal, the usb device disconnect irq may come firstly before the extcon notifier while system resume, so we will get 2 "wakeup" irq, one for usb device disconnect; and one for extcon ID cable change(real wakeup event), current driver treat them as 2 successive wakeup irq so can't handle it correctly, then finally the usb irq can't be enabled. This patch adds a check to bypass further usb events before controller resume finished to fix it. Fixes: 1f874edcb731 ("usb: chipidea: add runtime power management support") cc: Acked-by: Peter Chen Signed-off-by: Xu Yang Signed-off-by: Li Jun Link: https://lore.kernel.org/r/20231228110753.1755756-2-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman