kernel/linux.git/drivers/usb/chipidea/core.c, branch linux-4.4.y

USB: chipidea: fix interrupt deadlock

2021-11-26T10:58:41+00:00

commit 9aaa81c3366e8393a62374e3a1c67c69edc07b8a upstream. Chipidea core was calling the interrupt handler from non-IRQ context with interrupts enabled, something which can lead to a deadlock if there's an actual interrupt trying to take a lock that's already held (e.g. the controller lock in udc_irq()). Add a wrapper that can be used to fake interrupts instead of calling the handler directly. Fixes: 3ecb3e09b042 ("usb: chipidea: Use extcon framework for VBUS and ID detect") Fixes: 876d4e1e8298 ("usb: chipidea: core: add wakeup support for extcon") Cc: Peter Chen Cc: stable@vger.kernel.org # 4.4 Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20211021083447.20078-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman

usb: chipidea: core: add wakeup support for extcon

2020-07-22T07:10:05+00:00

commit 876d4e1e8298ad1f94d9e9392fc90486755437b4 upstream. If wakeup event occurred by extcon event, it needs to call ci_irq again since the first ci_irq calling at extcon notifier only wakes up controller, but do noop for event handling, it causes the extcon use case can't work well from low power mode. Cc: Fixes: 3ecb3e09b042 ("usb: chipidea: Use extcon framework for VBUS and ID detect") Reported-by: Philippe Schenker Tested-by: Philippe Schenker Signed-off-by: Peter Chen Link: https://lore.kernel.org/r/20200707060601.31907-2-peter.chen@kernel.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman

usb: chipidea: Grab the (legacy) USB PHY by phandle first

2019-04-27T07:33:49+00:00

[ Upstream commit 68ef236274793066b9ba3154b16c0acc1c891e5c ] According to the chipidea driver bindings, the USB PHY is specified via the "phys" phandle node. However, this only takes effect for USB PHYs that use the common PHY framework. For legacy USB PHYs, a simple lookup based on the USB PHY type is done instead. This does not play out well when more than one USB PHY is registered, since the first registered PHY matching the type will always be returned regardless of what the driver was bound to. Fix this by looking up the PHY based on the "phys" phandle node. Although generic PHYs are rather matched by their "phys-name" and not the "phys" phandle directly, there is no helper for similar lookup on legacy PHYs and it's probably not worth the effort to add it. When no legacy USB PHY is found by phandle, fallback to grabbing any registered USB2 PHY. This ensures backward compatibility if some users were actually relying on this mechanism. Signed-off-by: Paul Kocialkowski Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: chipidea: properly handle host or gadget initialization failure

2018-04-13T17:50:07+00:00

[ Upstream commit c4a0bbbdb7f6e3c37fa6deb3ef28c5ed99da6175 ] If ci_hdrc_host_init() or ci_hdrc_gadget_init() returns error and the error != -ENXIO, as Peter pointed out, "it stands for initialization for host or gadget has failed", so we'd better return failure rather continue. And before destroying the otg, i.e ci_hdrc_otg_destroy(ci), we should also check ci->roles[CI_ROLE_GADGET]. Signed-off-by: Jisheng Zhang Signed-off-by: Peter Chen Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

usb: chipidea: Only read/write OTGSC from one place

2017-05-14T11:32:56+00:00

commit f60f8ccd54e03c1afafb2b20ceb029a0eaf7a134 upstream. With the id and vbus detection done via extcon we need to make sure we poll the status of OTGSC properly by considering what the extcon is saying, and not just what the register is saying. Let's move this hw_wait_reg() function to the only place it's used and simplify it for polling the OTGSC register. Then we can make certain we only use the hw_read_otgsc() API to read OTGSC, which will make sure we properly handle extcon events. Acked-by: Peter Chen Cc: Greg Kroah-Hartman Cc: "Ivan T. Ivanov" Fixes: 3ecb3e09b042 ("usb: chipidea: Use extcon framework for VBUS and ID detect") Signed-off-by: Stephen Boyd Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman

usb: chipidea: move the lock initialization to core file

2016-12-02T08:09:00+00:00

commit a5d906bb261cde5f881a949d3b0fbaa285dcc574 upstream. This can fix below dump when the lock is accessed at host mode due to it is not initialized. [ 46.119638] INFO: trying to register non-static key. [ 46.124643] the code is fine but needs lockdep annotation. [ 46.130144] turning off the locking correctness validator. [ 46.135659] CPU: 0 PID: 690 Comm: cat Not tainted 4.9.0-rc3-00079-g4b75f1d #1210 [ 46.143075] Hardware name: Freescale i.MX6 SoloX (Device Tree) [ 46.148923] Backtrace: [ 46.151448] [] (dump_backtrace) from [] (show_stack+0x18/0x1c) [ 46.159038] r7:edf52000 [ 46.161412] r6:60000193 [ 46.163967] r5:00000000 [ 46.165035] r4:c0e25c2c [ 46.169109] [] (show_stack) from [] (dump_stack+0xb4/0xe8) [ 46.176362] [] (dump_stack) from [] (register_lock_class+0x4fc/0x56c) [ 46.184554] r10:c0e25d24 [ 46.187014] r9:edf53e70 [ 46.189569] r8:c1642444 [ 46.190637] r7:ee9da024 [ 46.193191] r6:00000000 [ 46.194258] r5:00000000 [ 46.196812] r4:00000000 [ 46.199185] r3:00000001 [ 46.203259] [] (register_lock_class) from [] (__lock_acquire+0x80/0x10f0) [ 46.211797] r10:c0e25d24 [ 46.214257] r9:edf53e70 [ 46.216813] r8:ee9da024 [ 46.217880] r7:c1642444 [ 46.220435] r6:edcd1800 [ 46.221502] r5:60000193 [ 46.224057] r4:00000000 [ 46.227953] [] (__lock_acquire) from [] (lock_acquire+0x74/0x94) [ 46.235710] r10:00000001 [ 46.238169] r9:edf53e70 [ 46.240723] r8:edf53f80 [ 46.241790] r7:00000001 [ 46.244344] r6:00000001 [ 46.245412] r5:60000193 [ 46.247966] r4:00000000 [ 46.251866] [] (lock_acquire) from [] (_raw_spin_lock_irqsave+0x40/0x54) [ 46.260319] r7:ee1c6a00 [ 46.262691] r6:c062a570 [ 46.265247] r5:20000113 [ 46.266314] r4:ee9da014 [ 46.270393] [] (_raw_spin_lock_irqsave) from [] (ci_port_test_show+0x2c/0x70) [ 46.279280] r6:eebd2000 [ 46.281652] r5:ee9da010 [ 46.284207] r4:ee9da014 [ 46.286810] [] (ci_port_test_show) from [] (seq_read+0x1ac/0x4f8) [ 46.294655] r9:edf53e70 [ 46.297028] r8:edf53f80 [ 46.299583] r7:ee1c6a00 [ 46.300650] r6:00000001 [ 46.303205] r5:00000000 [ 46.304273] r4:eebd2000 [ 46.306850] [] (seq_read) from [] (full_proxy_read+0x54/0x6c) [ 46.314348] r10:00000000 [ 46.316808] r9:c0a6ad30 [ 46.319363] r8:edf53f80 [ 46.320430] r7:00020000 [ 46.322986] r6:b6de3000 [ 46.324053] r5:ee1c6a00 [ 46.326607] r4:c0248b58 [ 46.330505] [] (full_proxy_read) from [] (__vfs_read+0x34/0x118) [ 46.338262] r9:edf52000 [ 46.340635] r8:c0107fc4 [ 46.343190] r7:00020000 [ 46.344257] r6:edf53f80 [ 46.346812] r5:c039e810 [ 46.347879] r4:ee1c6a00 [ 46.350447] [] (__vfs_read) from [] (vfs_read+0x8c/0x11c) [ 46.357597] r9:edf52000 [ 46.359969] r8:c0107fc4 [ 46.362524] r7:edf53f80 [ 46.363592] r6:b6de3000 [ 46.366147] r5:ee1c6a00 [ 46.367214] r4:00020000 [ 46.369782] [] (vfs_read) from [] (SyS_read+0x4c/0xa8) [ 46.376672] r8:c0107fc4 [ 46.379045] r7:00020000 [ 46.381600] r6:b6de3000 [ 46.382667] r5:ee1c6a00 [ 46.385222] r4:ee1c6a00 [ 46.387817] [] (SyS_read) from [] (ret_fast_syscall+0x0/0x1c) [ 46.395314] r7:00000003 [ 46.397687] r6:b6de3000 [ 46.400243] r5:00020000 [ 46.401310] r4:00020000 Fixes: 26c696c678c4 ("USB: Chipidea: rename struct ci13xxx variables from udc to ci") Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-ci-v4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next

2015-10-23T01:24:38+00:00

Peter writes: USB Chipidea updates for v4.4-rc1 - Use extcon framework for VBUS and ID detect - Add imx6sx and imx7d support - Other small changes

usb: chipidea: Add support for 'phy-clkgate-delay-us' property

2015-10-22T01:24:25+00:00

Add support for the optional 'phy-clkgate-delay-us' property that is used to describe the delay time between putting PHY into low power mode and turning off the PHY clock. Signed-off-by: Li Jun Signed-off-by: Fabio Estevam Signed-off-by: Peter Chen

usb: chipidea: Use extcon framework for VBUS and ID detect

2015-10-22T01:24:25+00:00

On recent Qualcomm platforms VBUS and ID lines are not routed to USB PHY LINK controller. Use extcon framework to receive connect and disconnect ID and VBUS notification. Signed-off-by: Ivan T. Ivanov Signed-off-by: Peter Chen

usb: common: of_usb_get_dr_mode to usb_get_dr_mode

2015-09-27T15:54:31+00:00

By using the unified device property interface, the function can be made available for all platforms and not just the ones using DT. Signed-off-by: Heikki Krogerus Signed-off-by: Felipe Balbi