kernel/linux.git/drivers/usb/chipidea/bits.h, branch v6.12.80

USB: chipidea: Use the correct style for SPDX License Identifier

2020-03-16T03:13:47+00:00

This patch corrects the SPDX License Identifier style in header files related to ChipIdea Highspeed Dual Role Controller. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used). Changes made by using a script provided by Joe Perches here: https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flkml.org%2Flkml%2F2019%2F2%2F7%2F46&data=02%7C01%7CPeter.Chen%40nxp.com%7Cbea69ff84b574ca6b48e08d7c8cf58cf%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637198665199494622&sdata=bk1n4%2BvnrfRS6ZDrps%2BuXiImdzaxKZ00YskBg6pjtn4%3D&reserved=0. Suggested-by: Joe Perches Signed-off-by: Nishad Kamdar Signed-off-by: Peter Chen

USB: chipidea: Remove redundant license text

2017-11-07T14:45:01+00:00

Now that the SPDX tag is in all USB files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Cc: Thierry Reding Cc: Jonathan Hunter Acked-by: Peter Chen Signed-off-by: Greg Kroah-Hartman

USB: add SPDX identifiers to all remaining files in drivers/usb/

2017-11-04T10:48:02+00:00

It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/usb/ and include/linux/usb* files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Thomas Gleixner Cc: Kate Stewart Cc: Philippe Ombredanne Signed-off-by: Greg Kroah-Hartman Acked-by: Felipe Balbi Acked-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

usb: chipidea: add tx/rx burst size configuration interface

2015-08-14T02:03:58+00:00

The user can adjust it through dts or platform data Signed-off-by: Peter Chen

usb: chipidea: add ahb burst configuration interface

2015-08-14T02:03:55+00:00

The users can change it through dts or platform data if they want to change the default value. Signed-off-by: Peter Chen

usb: chipidea: add ttctrl.ttha control interface

2015-08-14T01:13:10+00:00

The register of ttctrl.ttha describes like below: - Internal TT Hub Address Representation - RW - Default = 0000000b This field is used to match against the Hub Address field in QH & siTD to determine if the packet is routed to the internal TT for directly attached FS/LS devices. If the Hub Address in the QH or siTD does not match this address then the packet will be broadcast on the High Speed ports destined for a downstream High Speed hub with the address in the QH/siTD. In silicon RTL, this entry only affects QH and siTD, and the hub.addr at both QH and siTD are 0 in ehci core for chipidea (with hcd->has_tt = 1). So, for QH, if the "usage_tt" flag at RTL is 0, set CI_HDRC_SET_NON_ZERO_TTHA will not affect QH (with non-hs device); for siTD, set this flag will change remaining space requirement for the last transaction from 1023 bytes to 188 bytes, it can increase the number of transactions within one frame, ehci periodic schedule code will not queue the packet if the frame space is full, so it is safe to set this flag for siTD. With this flag, it can fix the problem Alan Stern reported below: http://www.spinics.net/lists/linux-usb/msg123125.html And may fix Michael Tessier's problem too. http://www.spinics.net/lists/linux-usb/msg118679.html CC: stern@rowland.harvard.edu CC: michael.tessier@axiontech.ca Signed-off-by: Peter Chen

usb: chipidea: support runtime power management for otg fsm mode

2015-03-18T15:19:12+00:00

This patch adds runtime power management support for otg fsm mode, since A-device in a_idle state cannot detect data pulse irq after suspended, here enable wakeup by connection before suspend to make it can be resumed by DP; and handle wakeup from that state like SRP. Signed-off-by: Li Jun Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman

usb: chipidea: add chipidea revision information

2015-03-18T15:19:10+00:00

Define ci_get_revision API to know the controller revision information according to chipidea 1.1a, 2.0a and 2.5a spec. Besides, add one entry at struct ci_hdrc to indicate revision information, it can be used for adding different code for revisions, eg kinds of errata. Reviewed-by: Stefan Agner Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman

usb: chipidea: OTG fsm timers initialization

2014-04-24T19:56:35+00:00

This patch adds OTG fsm timers initialization, which use controller's 1ms interrupt as timeout counter, also adds some local timers which are not in otg_fsm_timer list. Signed-off-by: Peter Chen Signed-off-by: Li Jun Signed-off-by: Greg Kroah-Hartman

usb: chipidea: add OTG fsm operation functions implementation

2014-04-24T19:56:35+00:00

Add OTG HNP and SRP operation functions implementation: - charge vbus - drive vbus - connection signaling - drive sof - start data pulse - add fsm timer - delete fsm timer - start host - start gadget Signed-off-by: Peter Chen Signed-off-by: Li Jun Signed-off-by: Greg Kroah-Hartman