kernel/linux.git/drivers/usb/cdns3, branch v6.1.124

usb: cdns3: Add quirk flag to enable suspend residency

2024-12-27T12:52:51+00:00

[ Upstream commit 0aca19e4037a4143273e90f1b44666b78b4dde9b ] Some platforms (e.g. ti,j721e-usb, ti,am64-usb) require this bit to be set to workaround a lockup issue with PHY short suspend intervals [1]. Add a platform quirk flag to indicate if Suspend Residency should be enabled. [1] - https://www.ti.com/lit/er/sprz457h/sprz457h.pdf i2409 - USB: USB2 PHY locks up due to short suspend Signed-off-by: Roger Quadros Signed-off-by: Ravi Gunasekaran Acked-by: Peter Chen Link: https://lore.kernel.org/r/20240516044537.16801-2-r-gunasekaran@ti.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: xhci: fix loss of data on Cadence xHC

2024-10-17T13:21:25+00:00

[ Upstream commit e5fa8db0be3e8757e8641600c518425a4589b85c ] Streams should flush their TRB cache, re-read TRBs, and start executing TRBs from the beginning of the new dequeue pointer after a 'Set TR Dequeue Pointer' command. Cadence controllers may fail to start from the beginning of the dequeue TRB as it doesn't clear the Opaque 'RsvdO' field of the stream context during 'Set TR Dequeue' command. This stream context area is where xHC stores information about the last partially executed TD when a stream is stopped. xHC uses this information to resume the transfer where it left mid TD, when the stream is restarted. Patch fixes this by clearing out all RsvdO fields before initializing new Stream transfer using a 'Set TR Dequeue Pointer' command. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") cc: stable@vger.kernel.org Signed-off-by: Pawel Laszczak Reviewed-by: Peter Chen Link: https://lore.kernel.org/r/PH7PR07MB95386A40146E3EC64086F409DD9D2@PH7PR07MB9538.namprd07.prod.outlook.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: cdnsp: Fix incorrect usb_request status

2024-10-17T13:21:19+00:00

commit 1702bec4477cc7d31adb4a760d14d33fac928b7a upstream. Fix changes incorrect usb_request->status returned during disabling endpoints. Before fix the status returned during dequeuing requests while disabling endpoint was ECONNRESET. Patch change it to ESHUTDOWN. Patch fixes issue detected during testing UVC gadget. During stopping streaming the class starts dequeuing usb requests and controller driver returns the -ECONNRESET status. After completion requests the class or application "uvc-gadget" try to queue this request again. Changing this status to ESHUTDOWN cause that UVC assumes that endpoint is disabled, or device is disconnected and stops re-queuing usb requests. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") cc: stable@vger.kernel.org Signed-off-by: Pawel Laszczak Reviewed-by: Peter Chen Link: https://lore.kernel.org/r/PH7PR07MB9538E8CA7A2096AAF6A3718FDD9E2@PH7PR07MB9538.namprd07.prod.outlook.com Signed-off-by: Greg Kroah-Hartman

usb: cdnsp: fix for Link TRB with TC

2024-09-04T11:25:04+00:00

commit 740f2e2791b98e47288b3814c83a3f566518fed2 upstream. Stop Endpoint command on LINK TRB with TC bit set to 1 causes that internal cycle bit can have incorrect state after command complete. In consequence empty transfer ring can be incorrectly detected when EP is resumed. NOP TRB before LINK TRB avoid such scenario. Stop Endpoint command is then on NOP TRB and internal cycle bit is not changed and have correct value. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") cc: Signed-off-by: Pawel Laszczak Reviewed-by: Peter Chen Link: https://lore.kernel.org/r/PH7PR07MB953878279F375CCCE6C6F40FDD8E2@PH7PR07MB9538.namprd07.prod.outlook.com Signed-off-by: Greg Kroah-Hartman

usb: cdnsp: fix incorrect index in cdnsp_get_hw_deq function

2024-09-04T11:25:04+00:00

commit 0497a356d3c498221eb0c1edc1e8985816092f12 upstream. Patch fixes the incorrect "stream_id" table index instead of "ep_index" used in cdnsp_get_hw_deq function. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") cc: stable@vger.kernel.org Signed-off-by: Pawel Laszczak Reviewed-by: Peter Chen Link: https://lore.kernel.org/r/PH7PR07MB95381F2182688811D5C711CEDD8D2@PH7PR07MB9538.namprd07.prod.outlook.com Signed-off-by: Greg Kroah-Hartman

usb: cdns3: fix memory double free when handle zero packet

2024-03-01T12:26:34+00:00

commit 5fd9e45f1ebcd57181358af28506e8a661a260b3 upstream. 829 if (request->complete) { 830 spin_unlock(&priv_dev->lock); 831 usb_gadget_giveback_request(&priv_ep->endpoint, 832 request); 833 spin_lock(&priv_dev->lock); 834 } 835 836 if (request->buf == priv_dev->zlp_buf) 837 cdns3_gadget_ep_free_request(&priv_ep->endpoint, request); Driver append an additional zero packet request when queue a packet, which length mod max packet size is 0. When transfer complete, run to line 831, usb_gadget_giveback_request() will free this requestion. 836 condition is true, so cdns3_gadget_ep_free_request() free this request again. Log: [ 1920.140696][ T150] BUG: KFENCE: use-after-free read in cdns3_gadget_giveback+0x134/0x2c0 [cdns3] [ 1920.140696][ T150] [ 1920.151837][ T150] Use-after-free read at 0x000000003d1cd10b (in kfence-#36): [ 1920.159082][ T150] cdns3_gadget_giveback+0x134/0x2c0 [cdns3] [ 1920.164988][ T150] cdns3_transfer_completed+0x438/0x5f8 [cdns3] Add check at line 829, skip call usb_gadget_giveback_request() if it is additional zero length packet request. Needn't call usb_gadget_giveback_request() because it is allocated in this driver. Cc: stable@vger.kernel.org Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Frank Li Reviewed-by: Roger Quadros Acked-by: Peter Chen Link: https://lore.kernel.org/r/20240202154217.661867-2-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman

usb: cdns3: fixed memory use after free at cdns3_gadget_ep_disable()

2024-03-01T12:26:34+00:00

commit cd45f99034b0c8c9cb346dd0d6407a95ca3d36f6 upstream. ... cdns3_gadget_ep_free_request(&priv_ep->endpoint, &priv_req->request); list_del_init(&priv_req->list); ... 'priv_req' actually free at cdns3_gadget_ep_free_request(). But list_del_init() use priv_req->list after it. [ 1542.642868][ T534] BUG: KFENCE: use-after-free read in __list_del_entry_valid+0x10/0xd4 [ 1542.642868][ T534] [ 1542.653162][ T534] Use-after-free read at 0x000000009ed0ba99 (in kfence-#3): [ 1542.660311][ T534] __list_del_entry_valid+0x10/0xd4 [ 1542.665375][ T534] cdns3_gadget_ep_disable+0x1f8/0x388 [cdns3] [ 1542.671571][ T534] usb_ep_disable+0x44/0xe4 [ 1542.675948][ T534] ffs_func_eps_disable+0x64/0xc8 [ 1542.680839][ T534] ffs_func_set_alt+0x74/0x368 [ 1542.685478][ T534] ffs_func_disable+0x18/0x28 Move list_del_init() before cdns3_gadget_ep_free_request() to resolve this problem. Cc: stable@vger.kernel.org Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Frank Li Reviewed-by: Roger Quadros Acked-by: Peter Chen Link: https://lore.kernel.org/r/20240202154217.661867-1-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman

usb: cdnsp: fixed issue with incorrect detecting CDNSP family controllers

2024-03-01T12:26:33+00:00

commit 47625b018c6bc788bc10dd654c82696eb0a5ef11 upstream. Cadence have several controllers from 0x000403xx family but current driver suuport detecting only one with DID equal 0x0004034E. It causes that if someone uses different CDNSP controller then driver will use incorrect version and register space. Patch fix this issue. cc: stable@vger.kernel.org Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Signed-off-by: Pawel Laszczak Link: https://lore.kernel.org/r/20240215121609.259772-1-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman

usb: cdnsp: blocked some cdns3 specific code

2024-03-01T12:26:33+00:00

commit 18a6be674306c9acb05c08e5c3fd376ef50a917c upstream. host.c file has some parts of code that were introduced for CDNS3 driver and should not be used with CDNSP driver. This patch blocks using these parts of codes by CDNSP driver. These elements include: - xhci_plat_cdns3_xhci object - cdns3 specific XECP_PORT_CAP_REG register - cdns3 specific XECP_AUX_CTRL_REG1 register cc: stable@vger.kernel.org Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Signed-off-by: Pawel Laszczak Link: https://lore.kernel.org/r/20240206104018.48272-1-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman

usb: cdns3: Fix uvc fail when DMA cross 4k boundery since sg enabled

2024-01-25T23:27:40+00:00

commit 40c304109e866a7dc123661a5c8ca72f6b5e14e0 upstream. Supposed DMA cross 4k bounder problem should be fixed at DEV_VER_V2, but still met problem when do ISO transfer if sg enabled. Data pattern likes below when sg enabled, package size is 1k and mult is 2 [UVC Header(8B) ] [data(3k - 8)] ... The received data at offset 0xd000 will get 0xc000 data, len 0x70. Error happen position as below pattern: 0xd000: wrong 0xe000: wrong 0xf000: correct 0x10000: wrong 0x11000: wrong 0x12000: correct ... To avoid DMA cross 4k bounder at ISO transfer, reduce burst len according to start DMA address's alignment. Cc: Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Frank Li Link: https://lore.kernel.org/r/20231224153816.1664687-4-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman