kernel/linux.git/drivers/usb/cdns3, branch v5.10.257

usb: cdns3: Fix double resource release in cdns3_pci_probe

2025-12-06T21:08:23+00:00

commit 1ec39d2cd88dac2e7cdbac248762f1f057971c5d upstream. The driver uses pcim_enable_device() to enable the PCI device, the device will be automatically disabled on driver detach through the managed device framework. The manual pci_disable_device() calls in the error paths are therefore redundant and should be removed. Found via static anlaysis and this is similar to commit 99ca0b57e49f ("thermal: intel: int340x: processor: Fix warning during module unload"). Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Cc: stable Signed-off-by: Miaoqian Lin Acked-by: Peter Chen Link: https://patch.msgid.link/20251026090859.33107-1-linmq006@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: cdns3: Fix deadlock when using NCM gadget

2025-05-02T05:41:17+00:00

commit a1059896f2bfdcebcdc7153c3be2307ea319501f upstream. The cdns3 driver has the same NCM deadlock as fixed in cdnsp by commit 58f2fcb3a845 ("usb: cdnsp: Fix deadlock issue during using NCM gadget"). Under PREEMPT_RT the deadlock can be readily triggered by heavy network traffic, for example using "iperf --bidir" over NCM ethernet link. The deadlock occurs because the threaded interrupt handler gets preempted by a softirq, but both are protected by the same spinlock. Prevent deadlock by disabling softirq during threaded irq handler. Cc: stable Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Ralph Siemsen Acked-by: Peter Chen Reviewed-by: Sebastian Andrzej Siewior Link: https://lore.kernel.org/r/20250318-rfs-cdns3-deadlock-v2-1-bfd9cfcee732@linaro.org Signed-off-by: Greg Kroah-Hartman

usb: cdns3: Add quirk flag to enable suspend residency

2025-01-09T12:24:51+00:00

[ Upstream commit 0aca19e4037a4143273e90f1b44666b78b4dde9b ] Some platforms (e.g. ti,j721e-usb, ti,am64-usb) require this bit to be set to workaround a lockup issue with PHY short suspend intervals [1]. Add a platform quirk flag to indicate if Suspend Residency should be enabled. [1] - https://www.ti.com/lit/er/sprz457h/sprz457h.pdf i2409 - USB: USB2 PHY locks up due to short suspend Signed-off-by: Roger Quadros Signed-off-by: Ravi Gunasekaran Acked-by: Peter Chen Link: https://lore.kernel.org/r/20240516044537.16801-2-r-gunasekaran@ti.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: cdns3: fix memory double free when handle zero packet

2024-03-01T12:16:49+00:00

commit 5fd9e45f1ebcd57181358af28506e8a661a260b3 upstream. 829 if (request->complete) { 830 spin_unlock(&priv_dev->lock); 831 usb_gadget_giveback_request(&priv_ep->endpoint, 832 request); 833 spin_lock(&priv_dev->lock); 834 } 835 836 if (request->buf == priv_dev->zlp_buf) 837 cdns3_gadget_ep_free_request(&priv_ep->endpoint, request); Driver append an additional zero packet request when queue a packet, which length mod max packet size is 0. When transfer complete, run to line 831, usb_gadget_giveback_request() will free this requestion. 836 condition is true, so cdns3_gadget_ep_free_request() free this request again. Log: [ 1920.140696][ T150] BUG: KFENCE: use-after-free read in cdns3_gadget_giveback+0x134/0x2c0 [cdns3] [ 1920.140696][ T150] [ 1920.151837][ T150] Use-after-free read at 0x000000003d1cd10b (in kfence-#36): [ 1920.159082][ T150] cdns3_gadget_giveback+0x134/0x2c0 [cdns3] [ 1920.164988][ T150] cdns3_transfer_completed+0x438/0x5f8 [cdns3] Add check at line 829, skip call usb_gadget_giveback_request() if it is additional zero length packet request. Needn't call usb_gadget_giveback_request() because it is allocated in this driver. Cc: stable@vger.kernel.org Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Frank Li Reviewed-by: Roger Quadros Acked-by: Peter Chen Link: https://lore.kernel.org/r/20240202154217.661867-2-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman

usb: cdns3: fixed memory use after free at cdns3_gadget_ep_disable()

2024-03-01T12:16:49+00:00

commit cd45f99034b0c8c9cb346dd0d6407a95ca3d36f6 upstream. ... cdns3_gadget_ep_free_request(&priv_ep->endpoint, &priv_req->request); list_del_init(&priv_req->list); ... 'priv_req' actually free at cdns3_gadget_ep_free_request(). But list_del_init() use priv_req->list after it. [ 1542.642868][ T534] BUG: KFENCE: use-after-free read in __list_del_entry_valid+0x10/0xd4 [ 1542.642868][ T534] [ 1542.653162][ T534] Use-after-free read at 0x000000009ed0ba99 (in kfence-#3): [ 1542.660311][ T534] __list_del_entry_valid+0x10/0xd4 [ 1542.665375][ T534] cdns3_gadget_ep_disable+0x1f8/0x388 [cdns3] [ 1542.671571][ T534] usb_ep_disable+0x44/0xe4 [ 1542.675948][ T534] ffs_func_eps_disable+0x64/0xc8 [ 1542.680839][ T534] ffs_func_set_alt+0x74/0x368 [ 1542.685478][ T534] ffs_func_disable+0x18/0x28 Move list_del_init() before cdns3_gadget_ep_free_request() to resolve this problem. Cc: stable@vger.kernel.org Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Frank Li Reviewed-by: Roger Quadros Acked-by: Peter Chen Link: https://lore.kernel.org/r/20240202154217.661867-1-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman

usb: cdns3: Fix uvc fail when DMA cross 4k boundery since sg enabled

2024-02-23T07:41:51+00:00

[ Upstream commit 40c304109e866a7dc123661a5c8ca72f6b5e14e0 ] Supposed DMA cross 4k bounder problem should be fixed at DEV_VER_V2, but still met problem when do ISO transfer if sg enabled. Data pattern likes below when sg enabled, package size is 1k and mult is 2 [UVC Header(8B) ] [data(3k - 8)] ... The received data at offset 0xd000 will get 0xc000 data, len 0x70. Error happen position as below pattern: 0xd000: wrong 0xe000: wrong 0xf000: correct 0x10000: wrong 0x11000: wrong 0x12000: correct ... To avoid DMA cross 4k bounder at ISO transfer, reduce burst len according to start DMA address's alignment. Cc: Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Frank Li Link: https://lore.kernel.org/r/20231224153816.1664687-4-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: cdns3: fix iso transfer error when mult is not zero

2024-02-23T07:41:51+00:00

[ Upstream commit 92f02efa1d86d7dcaef7f38a5fe3396c4e88a93c ] ISO basic transfer is ITP(SOF) Package_0 Package_1 ... Package_n CDNS3 DMA start dma transfer from memmory to internal FIFO when get SOF, controller will transfer data to usb bus from internal FIFO when get IN token. According USB spec defination: Maximum number of packets = (bMaxBurst + 1) * (Mult + 1) Internal memory should be the same as (bMaxBurst + 1) * (Mult + 1). DMA don't fetch data advance when ISO transfer, so only reserve (bMaxBurst + 1) * (Mult + 1) internal memory for ISO transfer. Need save Mult and bMaxBurst information and set it into EP_CFG register, otherwise only 1 package is sent by controller, other package will be lost. Cc: Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Frank Li Link: https://lore.kernel.org/r/20231224153816.1664687-3-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: cdns3: fix incorrect calculation of ep_buf_size when more than one config

2024-02-23T07:41:50+00:00

[ Upstream commit 2627335a1329a0d39d8d277994678571c4f21800 ] Previously, the cdns3_gadget_check_config() function in the cdns3 driver mistakenly calculated the ep_buf_size by considering only one configuration's endpoint information because "claimed" will be clear after call usb_gadget_check_config(). The fix involves checking the private flags EP_CLAIMED instead of relying on the "claimed" flag. Fixes: dce49449e04f ("usb: cdns3: allocate TX FIFO size according to composite EP number") Cc: stable Reported-by: Ravi Gunasekaran Signed-off-by: Frank Li Acked-by: Peter Chen Tested-by: Ravi Gunasekaran Link: https://lore.kernel.org/r/20230707230015.494999-2-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 92f02efa1d86 ("usb: cdns3: fix iso transfer error when mult is not zero") Signed-off-by: Sasha Levin

usb: cdns3: fix uvc failure work since sg support enabled

2024-02-23T07:41:50+00:00

[ Upstream commit 1b8be5ecff26201bafb0a554c74e91571299fb94 ] When IP version >= DEV_VER_V2, gadget:sg_supported is true. So uvc gadget function driver will use sg to equeue data, first is 8bytes header, the second is 1016bytes data. cdns3_prepare_trb: ep2in: trb 0000000000ac755f, dma buf: 0xbf455000, size: 8, burst: 128 ctrl: 0x00000415 (C=1, T=0, ISP, CHAIN, Normal) cdns3_prepare_trb: ep2in: trb 00000000a574e693, dma buf: 0xc0200fe0, size: 1016, burst: 128 ctrl: 0x00000405 (C=1, T=0, ISP, Normal) But cdns3_ep_run_transfer() can't correctly handle this case, which only support one TRB for ISO transfer. The controller requires duplicate the TD for each SOF if priv_ep->interval is not 1. DMA will read data from DDR to internal FIFO when get SOF. Send data to bus when receive IN token. DMA always refill FIFO when get SOF regardless host send IN token or not. If host send IN token later, some frames data will be lost. Fixed it by below major steps: 1. Calculate numembers of TRB base on sg_nums and priv_ep->interval. 2. Remove CHAIN flags for each end TRB of TD when duplicate TD. 3. The controller requires LINK TRB must be first TRB of TD. When check there are not enough TRBs lefts, just fill LINK TRB for left TRBs. .... CHAIN_TRB DATA_TRB, CHAIN_TRB DATA_TRB, LINK_TRB ... LINK_TRB ^End of TRB List Cc: Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Frank Li Link: https://lore.kernel.org/r/20231224153816.1664687-2-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: cdns3: Fixes for sparse warnings

2024-02-23T07:41:50+00:00

[ Upstream commit fba8701baed76eac00b84b59f09f6a077f24c534 ] Patch fixes the following warnings: cdns3-gadget.c:1203: sparse: warning: incorrect type in assignment (different base types) cdns3-gadget.c:1203: sparse: expected restricted __le32 [usertype] length cdns3-gadget.c:1203: sparse: got unsigned long cdns3-gadget.c:1250: sparse: warning: invalid assignment: |= cdns3-gadget.c:1250: sparse: left side has type restricted __le32 cdns3-gadget.c:1250: sparse: right side has type unsigned long cdns3-gadget.c:1253: sparse: warning: invalid assignment: |= cdns3-gadget.c:1253: sparse: left side has type restricted __le32 cdns3-gadget.c:1253: sparse: right side has type unsigned long cdns3-ep0.c:367: sparse: warning: restricted __le16 degrades to integer cdns3-ep0.c:792: sparse: warning: symbol 'cdns3_gadget_ep0_ops' was not declared. Should it be static? Reported-by: kernel test robot Signed-off-by: Pawel Laszczak Signed-off-by: Peter Chen Stable-dep-of: 1b8be5ecff26 ("usb: cdns3: fix uvc failure work since sg support enabled") Signed-off-by: Sasha Levin