kernel/linux.git/drivers/usb/cdns3/core.c, branch v5.10.264

Revert "usb: common: usb-conn-gpio: Set last role to unknown before initial detection"

2023-07-27T06:44:06+00:00

[ Upstream commit df49f2a0ac4a34c0cb4b5c233fcfa0add644c43c ] This reverts commit edd60d24bd858cef165274e4cd6cab43bdc58d15. Heikki reports that this should not be a global flag just to work around one broken driver and should be fixed differently, so revert it. Reported-by: Heikki Krogerus Fixes: edd60d24bd85 ("usb: common: usb-conn-gpio: Set last role to unknown before initial detection") Link: https://lore.kernel.org/r/ZImE4L3YgABnCIsP@kuha.fi.intel.com Cc: Prashanth K Cc: AngeloGioacchino Del Regno Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: common: usb-conn-gpio: Set last role to unknown before initial detection

2023-07-27T06:44:06+00:00

[ Upstream commit edd60d24bd858cef165274e4cd6cab43bdc58d15 ] Currently if we bootup a device without cable connected, then usb-conn-gpio won't call set_role() since last_role is same as current role. This happens because during probe last_role gets initialised to zero. To avoid this, added a new constant in enum usb_role, last_role is set to USB_ROLE_UNKNOWN before performing initial detection. While at it, also handle default case for the usb_role switch in cdns3, intel-xhci-usb-role-switch & musb/jz4740 to avoid build warnings. Fixes: 4602f3bff266 ("usb: common: add USB GPIO based connection detection driver") Signed-off-by: Prashanth K Reviewed-by: AngeloGioacchino Del Regno Message-ID: <1685544074-17337-1-git-send-email-quic_prashk@quicinc.com> Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: cdns3: Add support for DRD CDNSP

2022-12-02T16:40:03+00:00

[ Upstream commit db8892bb1bb64b6e3d1381ac342a2ee31e1b76b6 ] Patch adds support for Cadence DRD Super Speed Plus controller(CDNSP). CDNSP DRD is a part of Cadence CDNSP controller. The DRD CDNSP controller has a lot of difference on hardware level but on software level is quite compatible with CDNS3 DRD. For this reason CDNS3 DRD part of CDNS3 driver was reused for CDNSP driver. Signed-off-by: Pawel Laszczak Tested-by: Aswath Govindraju Signed-off-by: Peter Chen Stable-dep-of: 9d5333c93134 ("usb: cdns3: host: fix endless superspeed hub port reset") Signed-off-by: Sasha Levin

usb: cdns3: fix NULL pointer dereference on no platform data

2021-03-11T13:17:26+00:00

[ Upstream commit 448373d9db1a7000072f65103af19e20503f0c0c ] Some platforms (e.g. TI) will not have any platform data which will lead to NULL pointer dereference if we don't check for NULL pdata. Fixes: 7cea9657756b ("usb: cdns3: add quirk for enable runtime pm by default") Reported-by: Nishanth Menon Signed-off-by: Roger Quadros Acked-by: Pawel Laszczak Signed-off-by: Peter Chen Signed-off-by: Sasha Levin

usb: cdns3: add quirk for enable runtime pm by default

2021-03-11T13:17:25+00:00

[ Upstream commit 7cea9657756b2c83069a775c0671ff169bce456a ] Some vendors (eg: NXP) may want to enable runtime pm by default for power saving, add one quirk for it. Reviewed-by: Jun Li Signed-off-by: Peter Chen Signed-off-by: Sasha Levin

usb: cdns3: core: fix goto label for error path

2020-11-30T05:48:32+00:00

The usb_role_switch_register has been already called, so if the devm_request_irq has failed, it needs to call usb_role_switch_unregister. Fixes: b1234e3b3b26 ("usb: cdns3: add runtime PM support") Signed-off-by: Peter Chen

usb: cdns3: Fix hardware based role switch

2020-11-30T05:48:32+00:00

Hardware based role switch is broken as the driver always skips it. Fix this by registering for SW role switch only if 'usb-role-switch' property is present in the device tree. Fixes: 50642709f659 ("usb: cdns3: core: quit if it uses role switch class") Signed-off-by: Roger Quadros Signed-off-by: Peter Chen

usb: cdns3: core: quit if it uses role switch class

2020-10-02T06:57:40+00:00

If the board uses role switch class for switching the role, it should not depends on SoC OTG hardware siginal any more, so quit early. Signed-off-by: Peter Chen Signed-off-by: Felipe Balbi

usb: cdns3: Enable workaround for USB2.0 PHY Rx compliance test PHY lockup

2020-10-02T06:57:39+00:00

USB2.0 PHY hangs in Rx Compliance test when the incoming packet amplitude is varied below and above the Squelch Level of Receiver during the active packet multiple times. Version 1 of the controller allows PHY to be reset when RX fail condition is detected to work around the above issue. This feature is disabled by default and needs to be enabled using a bit from the newly added PHYRST_CFG register. This patch enables the workaround. There is no way to know controller version before device controller is started and the workaround needs to be applied for both host and device modes, so we rely on a DT property do decide when to apply the workaround. Signed-off-by: Pawel Laszczak Signed-off-by: Roger Quadros Signed-off-by: Felipe Balbi

usb: cdns3: add runtime PM support

2020-10-02T06:57:38+00:00

Introduce runtime PM and wakeup interrupt handler for cdns3, the runtime PM is default off since other cdns3 may not implement glue layer support for runtime PM. One typical wakeup event use case is xHCI runtime suspend will clear USBCMD.RS bit, after that the xHCI will not trigger any interrupts, so its parent (cdns core device) needs to resume xHCI device when any (wakeup) events occurs at host port. When the controller is in low power mode, the lpm flag will be set. The interrupt triggered later than lpm flag is set considers as wakeup interrupt and handled at cdns_wakeup_irq. Once the wakeup occurs, it first disables interrupt to avoid later interrupt occurrence since the controller is in low power mode at that time, and access registers may be invalid at that time. At wakeup handler, it will call pm_request_resume to wakeup xHCI device, and at runtime resume handler, it will enable interrupt again. The API platform_suspend is introduced for glue layer to implement platform specific PM sequence. Reviewed-by: Pawel Laszczak Signed-off-by: Peter Chen Signed-off-by: Felipe Balbi