kernel/linux.git/drivers/tty, branch v6.1.2

serial: sunsab: Fix error handling in sunsab_init()

2022-12-31T12:32:40+00:00

[ Upstream commit 1a6ec673fb627c26e2267ca0a03849f91dbd9b40 ] The sunsab_init() returns the platform_driver_register() directly without checking its return value, if platform_driver_register() failed, the allocated sunsab_ports is leaked. Fix by free sunsab_ports and set it to NULL when platform_driver_register() failed. Fixes: c4d37215a824 ("[SERIAL] sunsab: Convert to of_driver framework.") Signed-off-by: Yuan Can Link: https://lore.kernel.org/r/20221123061212.52593-1-yuancan@huawei.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

serial: altera_uart: fix locking in polling mode

2022-12-31T12:32:40+00:00

[ Upstream commit 1307c5d33cce8a41dd77c2571e4df65a5b627feb ] Since altera_uart_interrupt() may also be called from a poll timer in "serving_softirq" context, use spin_[lock_irqsave|unlock_irqrestore] variants, which are appropriate for both softirq and hardware interrupt contexts. Fixes: 2f8b9c15cd88 ("altera_uart: Add support for polling mode (IRQ-less)") Signed-off-by: Gabriel Somlo Link: https://lore.kernel.org/r/20221122200426.888349-1-gsomlo@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

serial: pch: Fix PCI device refcount leak in pch_request_dma()

2022-12-31T12:32:40+00:00

[ Upstream commit 8be3a7bf773700534a6e8f87f6ed2ed111254be5 ] As comment of pci_get_slot() says, it returns a pci_device with its refcount increased. The caller must decrement the reference count by calling pci_dev_put(). Since 'dma_dev' is only used to filter the channel in filter(), we can call pci_dev_put() before exiting from pch_request_dma(). Add the missing pci_dev_put() for the normal and error path. Fixes: 3c6a483275f4 ("Serial: EG20T: add PCH_UART driver") Signed-off-by: Xiongfeng Wang Link: https://lore.kernel.org/r/20221122114559.27692-1-wangxiongfeng2@huawei.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

serial: stm32: move dma_request_chan() before clk_prepare_enable()

2022-12-31T12:32:39+00:00

[ Upstream commit 0d114e9ff940ebad8e88267013bf96c605a6b336 ] If dma_request_chan() returns a PROBE_DEFER error, clk_disable_unprepare() will be called and USART clock will be disabled. But early console can be still active on the same USART. While moving dma_request_chan() before clk_prepare_enable(), the clock won't be taken in case of a DMA PROBE_DEFER error, and so it doesn't need to be disabled. Then USART is still clocked for early console. Fixes: a7770a4bfcf4 ("serial: stm32: defer probe for dma devices") Reported-by: Uwe Kleine-König Signed-off-by: Valentin Caron Link: https://lore.kernel.org/r/20221118170602.1057863-1-valentin.caron@foss.st.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

serial: pl011: Do not clear RX FIFO & RX interrupt in unthrottle.

2022-12-31T12:32:39+00:00

[ Upstream commit 032d5a71ed378ffc6a2d41a187d8488a4f9fe415 ] Clearing the RX FIFO will cause data loss. Copy the pl011_enabl_interrupts implementation, and remove the clear interrupt and FIFO part of the code. Fixes: 211565b10099 ("serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle") Signed-off-by: delisun Reviewed-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20221110020108.7700-1-delisun@pateo.com.cn Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

serial: amba-pl011: avoid SBSA UART accessing DMACR register

2022-12-31T12:32:39+00:00

[ Upstream commit 94cdb9f33698478b0e7062586633c42c6158a786 ] Chapter "B Generic UART" in "ARM Server Base System Architecture" [1] documentation describes a generic UART interface. Such generic UART does not support DMA. In current code, sbsa_uart_pops and amba_pl011_pops share the same stop_rx operation, which will invoke pl011_dma_rx_stop, leading to an access of the DMACR register. This commit adds a using_rx_dma check in pl011_dma_rx_stop to avoid the access to DMACR register for SBSA UARTs which does not support DMA. When the kernel enables DMA engine with "CONFIG_DMA_ENGINE=y", Linux SBSA PL011 driver will access PL011 DMACR register in some functions. For most real SBSA Pl011 hardware implementations, the DMACR write behaviour will be ignored. So these DMACR operations will not cause obvious problems. But for some virtual SBSA PL011 hardware, like Xen virtual SBSA PL011 (vpl011) device, the behaviour might be different. Xen vpl011 emulation will inject a data abort to guest, when guest is accessing an unimplemented UART register. As Xen VPL011 is SBSA compatible, it will not implement DMACR register. So when Linux SBSA PL011 driver access DMACR register, it will get an unhandled data abort fault and the application will get a segmentation fault: Unhandled fault at 0xffffffc00944d048 Mem abort info: ESR = 0x96000000 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x00: ttbr address size fault Data abort info: ISV = 0, ISS = 0x00000000 CM = 0, WnR = 0 swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000020e2e000 [ffffffc00944d048] pgd=100000003ffff803, p4d=100000003ffff803, pud=100000003ffff803, pmd=100000003fffa803, pte=006800009c090f13 Internal error: ttbr address size fault: 96000000 [#1] PREEMPT SMP ... Call trace: pl011_stop_rx+0x70/0x80 tty_port_shutdown+0x7c/0xb4 tty_port_close+0x60/0xcc uart_close+0x34/0x8c tty_release+0x144/0x4c0 __fput+0x78/0x220 ____fput+0x1c/0x30 task_work_run+0x88/0xc0 do_notify_resume+0x8d0/0x123c el0_svc+0xa8/0xc0 el0t_64_sync_handler+0xa4/0x130 el0t_64_sync+0x1a0/0x1a4 Code: b9000083 b901f001 794038a0 8b000042 (b9000041) ---[ end trace 83dd93df15c3216f ]--- note: bootlogd[132] exited with preempt_count 1 /etc/rcS.d/S07bootlogd: line 47: 132 Segmentation fault start-stop-daemon This has been discussed in the Xen community, and we think it should fix this in Linux. See [2] for more information. [1] https://developer.arm.com/documentation/den0094/c/?lang=en [2] https://lists.xenproject.org/archives/html/xen-devel/2022-11/msg00543.html Fixes: 0dd1e247fd39 (drivers: PL011: add support for the ARM SBSA generic UART) Signed-off-by: Jiamei Xie Reviewed-by: Andre Przywara Link: https://lore.kernel.org/r/20221117103237.86856-1-jiamei.xie@arm.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

serial: 8250_bcm7271: Fix error handling in brcmuart_init()

2022-12-31T12:32:38+00:00

[ Upstream commit 6a3ff858915fa8ca36c7eb02c87c9181ae2fc333 ] A problem about 8250_bcm7271 create debugfs failed is triggered with the following log given: [ 324.516635] debugfs: Directory 'bcm7271-uart' with parent '/' already present! The reason is that brcmuart_init() returns platform_driver_register() directly without checking its return value, if platform_driver_register() failed, it returns without destroy the newly created debugfs, resulting the debugfs of 8250_bcm7271 can never be created later. brcmuart_init() debugfs_create_dir() # create debugfs directory platform_driver_register() driver_register() bus_add_driver() priv = kzalloc(...) # OOM happened # return without destroy debugfs directory Fix by removing debugfs when platform_driver_register() returns error. Fixes: 41a469482de2 ("serial: 8250: Add new 8250-core based Broadcom STB driver") Signed-off-by: Yuan Can Link: https://lore.kernel.org/r/20221109072110.117291-2-yuancan@huawei.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

serial: tegra: Read DMA status before terminating

2022-12-31T12:32:38+00:00

[ Upstream commit 109a951a9f1fd8a34ebd1896cbbd5d5cede880a7 ] Read the DMA status before terminating the DMA, as doing so deletes the DMA desc. Also, to get the correct transfer status information, pause the DMA using dmaengine_pause() before reading the DMA status. Fixes: e9ea096dd225 ("serial: tegra: add serial driver") Reviewed-by: Jon Hunter Reviewed-by: Ilpo Järvinen Acked-by: Thierry Reding Signed-off-by: Akhil R Signed-off-by: Kartik Link: https://lore.kernel.org/r/1666105086-17326-1-git-send-email-kkartik@nvidia.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

Merge tag 'tty-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2022-11-18T18:59:52+00:00

Pull tty/serial driver fixes from Greg KH: "Here are a number of small tty and serial driver fixes for 6.1-rc6. They all resolve reported problems: - kernel doc build problems with the -rc1 serial driver documentation update - n_gsm reported problems - imx serial driver missing callback - lots of tiny 8250 driver fixes for reported issues. All of these have been in linux-next for over a week with no reported problems" * tag 'tty-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: docs/driver-api/miscellaneous: Remove kernel-doc of serial_core.c serial: 8250: Flush DMA Rx on RLSI serial: 8250_lpss: Use 16B DMA burst with Elkhart Lake serial: 8250_lpss: Configure DMA also w/o DMA filter serial: 8250: Fall back to non-DMA Rx if IIR_RDI occurs tty: n_gsm: fix sleep-in-atomic-context bug in gsm_control_send Revert "tty: n_gsm: replace kicktimer with delayed_work" Revert "tty: n_gsm: avoid call of sleeping functions from atomic context" serial: imx: Add missing .thaw_noirq hook tty: serial: fsl_lpuart: don't break the on-going transfer when global reset serial: 8250: omap: Flush PM QOS work on remove serial: 8250: omap: Fix unpaired pm_runtime_put_sync() in omap8250_remove() serial: 8250_omap: remove wait loop from Errata i202 workaround serial: 8250: omap: Fix missing PM runtime calls for omap8250_set_mctrl() serial: 8250: 8250_omap: Avoid RS485 RTS glitch on ->set_termios()

serial: 8250: Flush DMA Rx on RLSI

2022-11-09T12:04:39+00:00

Returning true from handle_rx_dma() without flushing DMA first creates a data ordering hazard. If DMA Rx has handled any character at the point when RLSI occurs, the non-DMA path handles any pending characters jumping them ahead of those characters that are pending under DMA. Fixes: 75df022b5f89 ("serial: 8250_dma: Fix RX handling") Cc: Signed-off-by: Ilpo Järvinen Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20221108121952.5497-5-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman