kernel/linux.git/drivers/tty, branch v5.4.151

tty: Fix out-of-bound vmalloc access in imageblit

2021-10-06T13:42:29+00:00

[ Upstream commit 3b0c406124719b625b1aba431659f5cdc24a982c ] This issue happens when a userspace program does an ioctl FBIOPUT_VSCREENINFO passing the fb_var_screeninfo struct containing only the fields xres, yres, and bits_per_pixel with values. If this struct is the same as the previous ioctl, the vc_resize() detects it and doesn't call the resize_screen(), leaving the fb_var_screeninfo incomplete. And this leads to the updatescrollmode() calculates a wrong value to fbcon_display->vrows, which makes the real_y() return a wrong value of y, and that value, eventually, causes the imageblit to access an out-of-bound address value. To solve this issue I made the resize_screen() be called even if the screen does not need any resizing, so it will "fix and fill" the fb_var_screeninfo independently. Cc: stable # after 5.15-rc2 is out, give it time to bake Reported-and-tested-by: syzbot+858dc7a2f7ef07c2c219@syzkaller.appspotmail.com Signed-off-by: Igor Matheus Andrade Torrente Link: https://lore.kernel.org/r/20210628134509.15895-1-igormtorrente@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

tty: synclink_gt: rename a conflicting function name

2021-09-30T08:09:23+00:00

[ Upstream commit 06e49073dfba24df4b1073a068631b13a0039c34 ] 'set_signals()' in synclink_gt.c conflicts with an exported symbol in arch/um/, so change set_signals() to set_gtsignals(). Keep the function names similar by also changing get_signals() to get_gtsignals(). ../drivers/tty/synclink_gt.c:442:13: error: conflicting types for ‘set_signals’ static void set_signals(struct slgt_info *info); ^~~~~~~~~~~ In file included from ../include/linux/irqflags.h:16:0, from ../include/linux/spinlock.h:58, from ../include/linux/mm_types.h:9, from ../include/linux/buildid.h:5, from ../include/linux/module.h:14, from ../drivers/tty/synclink_gt.c:46: ../arch/um/include/asm/irqflags.h:6:5: note: previous declaration of ‘set_signals’ was here int set_signals(int enable); ^~~~~~~~~~~ Fixes: 705b6c7b34f2 ("[PATCH] new driver synclink_gt") Cc: Greg Kroah-Hartman Cc: Jiri Slaby Cc: Paul Fulghum Signed-off-by: Randy Dunlap Link: https://lore.kernel.org/r/20210902003806.17054-1-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

tty: synclink_gt, drop unneeded forward declarations

2021-09-30T08:09:23+00:00

[ Upstream commit b9b90fe655c0bd816847ac1bcbf179cfa2981ecb ] Forward declarations make the code larger and rewrites harder. Harder as they are often omitted from global changes. Remove forward declarations which are not really needed, i.e. the definition of the function is before its first use. Signed-off-by: Jiri Slaby Link: https://lore.kernel.org/r/20210302062214.29627-39-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

serial: mvebu-uart: fix driver's tx_empty callback

2021-09-30T08:09:22+00:00

commit 74e1eb3b4a1ef2e564b4bdeb6e92afe844e900de upstream. Driver's tx_empty callback should signal when the transmit shift register is empty. So when the last character has been sent. STAT_TX_FIFO_EMP bit signals only that HW transmit FIFO is empty, which happens when the last byte is loaded into transmit shift register. STAT_TX_EMP bit signals when the both HW transmit FIFO and transmit shift register are empty. So replace STAT_TX_FIFO_EMP check by STAT_TX_EMP in mvebu_uart_tx_empty() callback function. Fixes: 30530791a7a0 ("serial: mvebu-uart: initial support for Armada-3700 serial port") Cc: stable Signed-off-by: Pali Rohár Link: https://lore.kernel.org/r/20210911132017.25505-1-pali@kernel.org Signed-off-by: Greg Kroah-Hartman

console: consume APC, DM, DCS

2021-09-26T12:07:05+00:00

commit 3a2b2eb55681158d3e3ef464fbf47574cf0c517c upstream. The Linux console's VT102 implementation already consumes OSC ("Operating System Command") sequences, probably because that's how palette changes are transmitted. In addition to OSC, there are three other major clases of ANSI control strings: APC ("Application Program Command"), PM ("Privacy Message"), and DCS ("Device Control String"). They are handled similarly to OSC in terms of termination. Source: vt100.net Add three new enumerated states, one for each of these types. All three are handled the same way right now--they simply consume input until terminated. I hope to expand upon this firmament in the future. Add new predicate ansi_control_string(), returning true for any of these states. Replace explicit checks against ESosc with calls to this function. Transition to these states appropriately from the escape initiation (ESesc) state. This was motivated by the following Notcurses bugs: https://github.com/dankamongmen/notcurses/issues/2050 https://github.com/dankamongmen/notcurses/issues/1828 https://github.com/dankamongmen/notcurses/issues/2069 where standard VT sequences are not consumed by the Linux console. It's not necessary that the Linux console *support* these sequences, but it ought *consume* these well-specified classes of sequences. Tested by sending a variety of escape sequences to the console, and verifying that they still worked, or were now properly consumed. Verified that the escapes were properly terminated at a generic level. Verified that the Notcurses tools continued to show expected output on the Linux console, except now without escape bleedthrough. Link: https://lore.kernel.org/lkml/YSydL0q8iaUfkphg@schwarzgerat.orthanc/ Signed-off-by: nick black Cc: Greg Kroah-Hartman Cc: Jiri Slaby Cc: Tetsuo Handa Cc: Daniel Vetter Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

serial: sh-sci: fix break handling for sysrq

2021-09-22T10:26:33+00:00

[ Upstream commit 87b8061bad9bd4b549b2daf36ffbaa57be2789a2 ] This fixes two issues that cause the sysrq sequence to be inadvertently aborted on SCIF serial consoles: - a NUL character remains in the RX queue after a break has been detected, which is then passed on to uart_handle_sysrq_char() - the break interrupt is handled twice on controllers with multiplexed ERI and BRI interrupts Signed-off-by: Ulrich Hecht Link: https://lore.kernel.org/r/20210816162201.28801-1-uli+renesas@fpond.eu Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

serial: 8250_pci: make setup_port() parameters explicitly unsigned

2021-09-22T10:26:30+00:00

[ Upstream commit 3a96e97ab4e835078e6f27b7e1c0947814df3841 ] The bar and offset parameters to setup_port() are used in pointer math, and while it would be very difficult to get them to wrap as a negative number, just be "safe" and make them unsigned so that static checkers do not trip over them unintentionally. Cc: Jiri Slaby Reported-by: Jordy Zomer Link: https://lore.kernel.org/r/20210726130717.2052096-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

hvsi: don't panic on tty_register_driver failure

2021-09-22T10:26:30+00:00

[ Upstream commit 7ccbdcc4d08a6d7041e4849219bbb12ffa45db4c ] The alloc_tty_driver failure is handled gracefully in hvsi_init. But tty_register_driver is not. panic is called if that one fails. So handle the failure of tty_register_driver gracefully too. This will keep at least the console functional as it was enabled earlier by console_initcall in hvsi_console_init. Instead of shooting down the whole system. This means, we disable interrupts and restore hvsi_wait back to poll_for_state(). Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Jiri Slaby Link: https://lore.kernel.org/r/20210723074317.32690-3-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

serial: 8250: Define RX trigger levels for OxSemi 950 devices

2021-09-22T10:26:29+00:00

[ Upstream commit d7aff291d069c4418285f3c8ee27b0ff67ce5998 ] Oxford Semiconductor 950 serial port devices have a 128-byte FIFO and in the enhanced (650) mode, which we select in `autoconfig_has_efr' with the ECB bit set in the EFR register, they support the receive interrupt trigger level selectable with FCR bits 7:6 from the set of 16, 32, 112, 120. This applies to the original OX16C950 discrete UART[1] as well as 950 cores embedded into more complex devices. For these devices we set the default to 112, which sets an excessively high level of 112 or 7/8 of the FIFO capacity, unlike with other port types where we choose at most 1/2 of their respective FIFO capacities. Additionally we don't make the trigger level configurable. Consequently frequent input overruns happen with high bit rates where hardware flow control cannot be used (e.g. terminal applications) even with otherwise highly-performant systems. Lower the default receive interrupt trigger level to 32 then, and make it configurable. Document the trigger levels along with other port types, including the set of 16, 32, 64, 112 for the transmit interrupt as well[2]. References: [1] "OX16C950 rev B High Performance UART with 128 byte FIFOs", Oxford Semiconductor, Inc., DS-0031, Sep 05, Table 10: "Receiver Trigger Levels", p. 22 [2] same, Table 9: "Transmit Interrupt Trigger Levels", p. 22 Signed-off-by: Maciej W. Rozycki Link: https://lore.kernel.org/r/alpine.DEB.2.21.2106260608480.37803@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

tty: serial: jsm: hold port lock when reporting modem line changes

2021-09-22T10:26:28+00:00

[ Upstream commit 240e126c28df084222f0b661321e8e3ecb0d232e ] uart_handle_dcd_change() requires a port lock to be held and will emit a warning when lockdep is enabled. Held corresponding lock to fix the following warnings. [ 132.528648] WARNING: CPU: 5 PID: 11600 at drivers/tty/serial/serial_core.c:3046 uart_handle_dcd_change+0xf4/0x120 [ 132.530482] Modules linked in: [ 132.531050] CPU: 5 PID: 11600 Comm: jsm Not tainted 5.14.0-rc1-00003-g7fef2edf7cc7-dirty #31 [ 132.535268] RIP: 0010:uart_handle_dcd_change+0xf4/0x120 [ 132.557100] Call Trace: [ 132.557562] ? __free_pages+0x83/0xb0 [ 132.558213] neo_parse_modem+0x156/0x220 [ 132.558897] neo_param+0x399/0x840 [ 132.559495] jsm_tty_open+0x12f/0x2d0 [ 132.560131] uart_startup.part.18+0x153/0x340 [ 132.560888] ? lock_is_held_type+0xe9/0x140 [ 132.561660] uart_port_activate+0x7f/0xe0 [ 132.562351] ? uart_startup.part.18+0x340/0x340 [ 132.563003] tty_port_open+0x8d/0xf0 [ 132.563523] ? uart_set_options+0x1e0/0x1e0 [ 132.564125] uart_open+0x24/0x40 [ 132.564604] tty_open+0x15c/0x630 Signed-off-by: Zheyu Ma Link: https://lore.kernel.org/r/1626242003-3809-1-git-send-email-zheyuma97@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin