kernel/linux.git/drivers/tty, branch v5.4.113

vt/consolemap: do font sum unsigned

2021-03-07T11:20:44+00:00

[ Upstream commit 9777f8e60e718f7b022a94f2524f967d8def1931 ] The constant 20 makes the font sum computation signed which can lead to sign extensions and signed wraps. It's not much of a problem as we build with -fno-strict-overflow. But if we ever decide not to, be ready, so switch the constant to unsigned. Signed-off-by: Jiri Slaby Link: https://lore.kernel.org/r/20210105120239.28031-7-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

serial: mvebu-uart: fix tx lost characters at power off

2021-01-27T10:47:50+00:00

commit 54ca955b5a4024e2ce0f206b03adb7109bc4da26 upstream. Commit c685af1108d7 ("serial: mvebu-uart: fix tx lost characters") fixed tx lost characters at low baud rates but started causing tx lost characters when kernel is going to power off or reboot. TX_EMP tells us when transmit queue is empty therefore all characters were transmitted. TX_RDY tells us when CPU can send a new character. Therefore we need to use different check prior transmitting new character and different check after all characters were sent. This patch splits polling code into two functions: wait_for_xmitr() which waits for TX_RDY and wait_for_xmite() which waits for TX_EMP. When rebooting A3720 platform without this patch on UART is print only: [ 42.699� And with this patch on UART is full output: [ 39.530216] reboot: Restarting system Fixes: c685af1108d7 ("serial: mvebu-uart: fix tx lost characters") Signed-off-by: Pali Rohár Cc: stable Link: https://lore.kernel.org/r/20201223191931.18343-1-pali@kernel.org Signed-off-by: Greg Kroah-Hartman

riscv: Fix sifive serial driver

2021-01-27T10:47:43+00:00

[ Upstream commit 1f1496a923b6ba16679074fe77100e1b53cdb880 ] Setup the port uartclk in sifive_serial_probe() so that the base baud rate is correctly printed during device probe instead of always showing "0". I.e. the probe message is changed from 38000000.serial: ttySIF0 at MMIO 0x38000000 (irq = 1, base_baud = 0) is a SiFive UART v0 to the correct: 38000000.serial: ttySIF0 at MMIO 0x38000000 (irq = 1, base_baud = 115200) is a SiFive UART v0 Signed-off-by: Damien Le Moal Reviewed-by: Palmer Dabbelt Acked-by: Palmer Dabbelt Signed-off-by: Palmer Dabbelt Signed-off-by: Sasha Levin

serial_core: Check for port state when tty is in error state

2020-12-30T10:51:00+00:00

commit 2f70e49ed860020f5abae4f7015018ebc10e1f0e upstream. At the moment opening a serial device node (such as /dev/ttyS3) succeeds even if there is no actual serial device behind it. Reading/writing/ioctls fail as expected because the uart port is not initialized (the type is PORT_UNKNOWN) and the TTY_IO_ERROR error state bit is set fot the tty. However setting line discipline does not have these checks 8250_port.c (8250 is the default choice made by univ8250_console_init()). As the result of PORT_UNKNOWN, uart_port::iobase is NULL which a platform translates onto some address accessing which produces a crash like below. This adds tty_port_initialized() to uart_set_ldisc() to prevent the crash. Found by syzkaller. Signed-off-by: Alexey Kardashevskiy Link: https://lore.kernel.org/r/20201203055834.45838-1-aik@ozlabs.ru Cc: stable Signed-off-by: Greg Kroah-Hartman

serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access

2020-12-21T12:27:06+00:00

commit d96f04d347e4011977abdbb4da5d8f303ebd26f8 upstream. It has been observed that once per 300-1300 port openings the first transmitted byte is being corrupted on AM3352 ("v" written to FIFO appeared as "e" on the wire). It only happened if single byte has been transmitted right after port open, which means, DMA is not used for this transfer and the corruption never happened afterwards. Therefore I've carefully re-read the MDR1 errata (link below), which says "when accessing the MDR1 registers that causes a dummy under-run condition that will freeze the UART in IrDA transmission. In UART mode, this may corrupt the transferred data". Strictly speaking, omap_8250_mdr1_errataset() performs a read access and if the value is the same as should be written, exits without errata-recommended FIFO reset. A brief check of the serial_omap_mdr1_errataset() from the competing omap-serial driver showed it has no read access of MDR1. After removing the read access from omap_8250_mdr1_errataset() the data corruption never happened any more. Link: https://www.ti.com/lit/er/sprz360i/sprz360i.pdf Fixes: 61929cf0169d ("tty: serial: Add 8250-core based omap driver") Cc: stable@vger.kernel.org Signed-off-by: Alexander Sverdlin Link: https://lore.kernel.org/r/20201210055257.1053028-1-alexander.sverdlin@gmail.com Signed-off-by: Greg Kroah-Hartman

tty: Fix ->session locking

2020-12-11T12:23:28+00:00

commit c8bcd9c5be24fb9e6132e97da5a35e55a83e36b9 upstream. Currently, locking of ->session is very inconsistent; most places protect it using the legacy tty mutex, but disassociate_ctty(), __do_SAK(), tiocspgrp() and tiocgsid() don't. Two of the writers hold the ctrl_lock (because they already need it for ->pgrp), but __proc_set_tty() doesn't do that yet. On a PREEMPT=y system, an unprivileged user can theoretically abuse this broken locking to read 4 bytes of freed memory via TIOCGSID if tiocgsid() is preempted long enough at the right point. (Other things might also go wrong, especially if root-only ioctls are involved; I'm not sure about that.) Change the locking on ->session such that: - tty_lock() is held by all writers: By making disassociate_ctty() hold it. This should be fine because the same lock can already be taken through the call to tty_vhangup_session(). The tricky part is that we need to shorten the area covered by siglock to be able to take tty_lock() without ugly retry logic; as far as I can tell, this should be fine, since nothing in the signal_struct is touched in the `if (tty)` branch. - ctrl_lock is held by all writers: By changing __proc_set_tty() to hold the lock a little longer. - All readers that aren't holding tty_lock() hold ctrl_lock: By adding locking to tiocgsid() and __do_SAK(), and expanding the area covered by ctrl_lock in tiocspgrp(). Cc: stable@kernel.org Signed-off-by: Jann Horn Reviewed-by: Jiri Slaby Signed-off-by: Greg Kroah-Hartman

tty: Fix ->pgrp locking in tiocspgrp()

2020-12-11T12:23:28+00:00

commit 54ffccbf053b5b6ca4f6e45094b942fab92a25fc upstream. tiocspgrp() takes two tty_struct pointers: One to the tty that userspace passed to ioctl() (`tty`) and one to the TTY being changed (`real_tty`). These pointers are different when ioctl() is called with a master fd. To properly lock real_tty->pgrp, we must take real_tty->ctrl_lock. This bug makes it possible for racing ioctl(TIOCSPGRP, ...) calls on both sides of a PTY pair to corrupt the refcount of `struct pid`, leading to use-after-free errors. Fixes: 47f86834bbd4 ("redo locking of tty->pgrp") CC: stable@kernel.org Signed-off-by: Jann Horn Reviewed-by: Jiri Slaby Signed-off-by: Greg Kroah-Hartman

tty: serial: imx: keep console clocks always on

2020-11-24T12:29:20+00:00

commit e67c139c488e84e7eae6c333231e791f0e89b3fb upstream. For below code, there has chance to cause deadlock in SMP system: Thread 1: clk_enable_lock(); pr_info("debug message"); clk_enable_unlock(); Thread 2: imx_uart_console_write() clk_enable() clk_enable_lock(); Thread 1: Acuired clk enable_lock -> printk -> console_trylock_spinning Thread 2: console_unlock() -> imx_uart_console_write -> clk_disable -> Acquite clk enable_lock So the patch is to keep console port clocks always on like other console drivers. Fixes: 1cf93e0d5488 ("serial: imx: remove the uart_console() check") Acked-by: Uwe Kleine-König Signed-off-by: Fugang Duan Link: https://lore.kernel.org/r/20201111025136.29818-1-fugang.duan@nxp.com Cc: stable [fix up build warning - gregkh] Signed-off-by: Greg Kroah-Hartman

tty: serial: imx: fix potential deadlock

2020-11-24T12:29:20+00:00

commit 33f16855dcb973f745c51882d0e286601ff3be2b upstream. Enabling the lock dependency validator has revealed that the way spinlocks are used in the IMX serial port could result in a deadlock. Specifically, imx_uart_int() acquires a spinlock without disabling the interrupts, meaning that another interrupt could come along and try to acquire the same spinlock, potentially causing the two to wait for each other indefinitely. Use spin_lock_irqsave() instead to disable interrupts upon acquisition of the spinlock. Fixes: c974991d2620 ("tty:serial:imx: use spin_lock instead of spin_lock_irqsave in isr") Reviewed-by: Uwe Kleine-König Signed-off-by: Sam Nobs Link: https://lore.kernel.org/r/1604955006-9363-1-git-send-email-samuel.nobs@taitradio.com Cc: stable Signed-off-by: Greg Kroah-Hartman

tty: serial: fsl_lpuart: LS1021A has a FIFO size of 16 words, like LS1028A

2020-11-10T11:37:33+00:00

commit c97f2a6fb3dfbfbbc88edc8ea62ef2b944e18849 upstream. Prior to the commit that this one fixes, the FIFO size was derived from the read-only register LPUARTx_FIFO[TXFIFOSIZE] using the following formula: TX FIFO size = 2 ^ (LPUARTx_FIFO[TXFIFOSIZE] - 1) The documentation for LS1021A is a mess. Under chapter 26.1.3 LS1021A LPUART module special consideration, it mentions TXFIFO_SZ and RXFIFO_SZ being equal to 4, and in the register description for LPUARTx_FIFO, it shows the out-of-reset value of TXFIFOSIZE and RXFIFOSIZE fields as "011", even though these registers read as "101" in reality. And when LPUART on LS1021A was working, the "101" value did correspond to "16 datawords", by applying the formula above, even though the documentation is wrong again (!!!!) and says that "101" means 64 datawords (hint: it doesn't). So the "new" formula created by commit f77ebb241ce0 has all the premises of being wrong for LS1021A, because it relied only on false data and no actual experimentation. Interestingly, in commit c2f448cff22a ("tty: serial: fsl_lpuart: add LS1028A support"), Michael Walle applied a workaround to this by manually setting the FIFO widths for LS1028A. It looks like the same values are used by LS1021A as well, in fact. When the driver thinks that it has a deeper FIFO than it really has, getty (user space) output gets truncated. Many thanks to Michael for pointing out where to look. Fixes: f77ebb241ce0 ("tty: serial: fsl_lpuart: correct the FIFO depth size") Suggested-by: Michael Walle Signed-off-by: Vladimir Oltean Link: https://lore.kernel.org/r/20201023013429.3551026-1-vladimir.oltean@nxp.com Reviewed-by：Fugang Duan Cc: stable Signed-off-by: Greg Kroah-Hartman