kernel/linux.git/drivers/tty, branch v5.10.268

serial: amba-pl011: synchronize DMA teardown

2026-08-27T12:27:34+00:00

[ Upstream commit 440915499231e9db1c361aa45bb702e8fd3b4a32 ] dmaengine_terminate_all() does not wait for a running callback, so the TX callback can still touch the TX buffer after it is freed. The RX poll timer reads the RX buffers without the port lock. Switch to dmaengine_terminate_sync() and delete the RX timer before freeing the buffers. Fixes: ead76f329f77 ("ARM: 6763/1: pl011: add optional RX DMA to PL011 v2") Cc: stable Assisted-by: Codex:gpt-5.6 Signed-off-by: Fan Wu Link: https://patch.msgid.link/20260731085915.326775-4-fanwu01@zju.edu.cn Signed-off-by: Greg Kroah-Hartman [ changed upstream's `timer_delete_sync()` deletion to match this tree's `del_timer_sync()` spelling at the old call site ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

serial: sc16is7xx: implement gpio get_direction() callback

2026-08-23T12:16:26+00:00

[ Upstream commit af071d9e07e57cfff239e8d09d2f3b05ebc9c667 ] It's strongly recommended for GPIO drivers to always implement the .get_direction() callback - even when the direction is tracked in software. The GPIO core emits a warning when the callback is missing and a user reads the direction of a line, e.g. via /sys/kernel/debug/gpio. Fixes: dfeae619d781 ("serial: sc16is7xx") Cc: stable Signed-off-by: Hugo Villeneuve Acked-by: Bartosz Golaszewski Link: https://patch.msgid.link/20260716210813.2582826-1-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

serial: sc16is7xx: fix regression with GPIO configuration

2026-08-23T12:16:26+00:00

[ Upstream commit 0499942928341d572a42199580433c2b0725211e ] Commit 679875d1d880 ("sc16is7xx: Separate GPIOs from modem control lines") and commit 21144bab4f11 ("sc16is7xx: Handle modem status lines") changed the function of the GPIOs pins to act as modem control lines without any possibility of selecting GPIO function. As a consequence, applications that depends on GPIO lines configured by default as GPIO pins no longer work as expected. Also, the change to select modem control lines function was done only for channel A of dual UART variants (752/762). This was not documented in the log message. Allow to specify GPIO or modem control line function in the device tree, and for each of the ports (A or B). Do so by using the new device-tree property named "nxp,modem-control-line-ports" (property added in separate patch). When registering GPIO chip controller, mask-out GPIO pins declared as modem control lines according to this new DT property. Fixes: 679875d1d880 ("sc16is7xx: Separate GPIOs from modem control lines") Fixes: 21144bab4f11 ("sc16is7xx: Handle modem status lines") Cc: stable@vger.kernel.org Signed-off-by: Hugo Villeneuve Reviewed-by: Andy Shevchenko Reviewed-by: Lech Perczak Tested-by: Lech Perczak Acked-by: Rob Herring Link: https://lore.kernel.org/r/20230807214556.540627-5-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: af071d9e07e5 ("serial: sc16is7xx: implement gpio get_direction() callback") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

serial: sc16is7xx: remove obsolete out_thread label

2026-08-23T12:16:26+00:00

[ Upstream commit dabc54a45711fe77674a6c0348231e00e66bd567 ] Commit c8f71b49ee4d ("serial: sc16is7xx: setup GPIO controller later in probe") moved GPIO setup code later in probe function. Doing so also required to move ports cleanup code (out_ports label) after the GPIO cleanup code. After these moves, the out_thread label becomes misplaced and makes part of the cleanup code illogical. This patch remove the now obsolete out_thread label and make GPIO setup code jump to out_ports label if it fails. Signed-off-by: Hugo Villeneuve Reviewed-by: Lech Perczak Tested-by: Lech Perczak Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20230807214556.540627-3-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: af071d9e07e5 ("serial: sc16is7xx: implement gpio get_direction() callback") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

serial: sc16is7xx: Fill in rs485_supported

2026-08-23T12:16:26+00:00

[ Upstream commit 267913ecf73745ca3e8fc8282671b0b4f24df5fe ] Add information on supported serial_rs485 features. This driver does not support delay_rts_after_send but the pre-existing behavior is to return -EINVAL if delay_rts_after_send is non-zero. In contrast, other drivers that do not support delay_rts_after_send either zero delay_rts_after_send or do not care (leave the inaccurate value). As changing this would cause userspace visible impact, the change is not attempted here. But perhaps it should be still tried (maybe nobody finds that kind of API oddity significant)? Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20220606100433.13793-21-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: af071d9e07e5 ("serial: sc16is7xx: implement gpio get_direction() callback") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

sc16is7xx: Properly resume TX after stop

2026-08-23T12:16:26+00:00

[ Upstream commit cc4c1d05eb10c3ad4c6315f1897bc56b1e7429aa ] sc16is7xx_stop_tx() clears THRI bit and thus disables THRI interrupt. This makes it possible for transmission to cease indefinitely when more than 64 characters are being sent. The sc16is7xx_handle_tx() call executed by sc16is7xx_tx_proc() can send up to FIFO length (64) characters. If more characters are written to the output buffer, then the THRI interrupt is needed. Solve the issue by enabling THRI interrupt in sc16is7xx_tx_proc(). Signed-off-by: Tomasz Moń Link: https://lore.kernel.org/r/20220301060332.2561851-2-tomasz.mon@camlingroup.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: af071d9e07e5 ("serial: sc16is7xx: implement gpio get_direction() callback") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

serial: 8250_mid: Fix NULL function pointer dereference on DNV/ICX-D/SNR platforms

2026-08-23T12:16:26+00:00

[ Upstream commit 7fb13fd7e9a59a37cd911efff83abe19e3ee029d ] Commit b1b4efea05a5 ("serial: 8250_mid: Disable DMA for selected platforms") replaced the dnv_board setup and exit callbacks with PTR_IF(false, ...), which evaluates to NULL. However, the three call sites in mid8250_probe() and mid8250_remove() unconditionally dereference these function pointers without NULL checks, causing a NULL pointer dereference (kernel oops) on any Denverton (DNV), Ice Lake Xeon D (ICX-D/CDF), or Snowridge (SNR) platform. Fix this by adding the missing NULL checks before calling the setup and exit callbacks. Fixes: b1b4efea05a5 ("serial: 8250_mid: Disable DMA for selected platforms") Cc: stable Reviewed-by: Andy Shevchenko Signed-off-by: Jiangshan Yi Link: https://patch.msgid.link/20260715073546.1875083-1-yijiangshan@kylinos.cn Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

serial: 8250_mid: Remove unneeded test for ->setup() presence

2026-08-23T12:16:25+00:00

[ Upstream commit 324facd1ccb353a213ea2c2785604f2507f79297 ] All supported platforms by this driver require ->setup() and ->exit(). Remove unneeded test for ->setup() presence. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20220215101111.47250-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 7fb13fd7e9a5 ("serial: 8250_mid: Fix NULL function pointer dereference on DNV/ICX-D/SNR platforms") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

serial: max310x: implement gpio_chip::get_direction()

2026-08-23T12:16:19+00:00

[ Upstream commit a483b1a91b33b7533280e7c3efd2bc1275caef18 ] It's strongly recommended for GPIO drivers to always implement the .get_direction() callback - even when the direction is tracked in software. The GPIO core emits a warning when the callback is missing and a user reads the direction of a line, e.g. via /sys/kernel/debug/gpio. The MAX310X keeps the GPIO direction in the GPIOCFG register (a set bit selects output), which the existing direction_input/output callbacks already program, so the current direction can be read back directly. Fixes: f65444187a66 ("serial: New serial driver MAX310X") Cc: stable Signed-off-by: Tapio Reijonen Reviewed-by: Linus Walleij Reviewed-by: Bartosz Golaszewski Reviewed-by: Hugo Villeneuve Link: https://patch.msgid.link/20260615-b4-serial-max310x-gpio-get-direction-v2-1-4704ba2b181a@vaisala.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

serial: max310x: replace bare use of 'unsigned' with 'unsigned int' (checkpatch)

2026-08-23T12:16:19+00:00

[ Upstream commit 79b69eb09cf5b6a77e621b2838b7e0d38113debb ] Fixes the following checkpatch warnings: WARNING: Prefer 'unsigned int' to bare use of 'unsigned' With this change, the affected functions now match the prototypes in struct gpio_chip. Reviewed-by: Andy Shevchenko Signed-off-by: Hugo Villeneuve Link: https://lore.kernel.org/r/20240118152213.2644269-16-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: a483b1a91b33 ("serial: max310x: implement gpio_chip::get_direction()") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman