kernel/linux.git/drivers/tty, branch master

Merge tag 'tty-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2026-04-19T15:44:41+00:00

Pull tty/serial updates from Greg KH: "Here is the set of tty and serial driver changes for 7.1-rc1. Not much here this cycle, biggest thing is the removal of an old driver that never got any actual hardware support (esp32), and the second try to moving the tty ports to their own workqueues (first try was in 7.0-rc1 but was reverted due to problems) Otherwise it's just a small set of driver updates and some vt modifier key enhancements. All have been in linux-next for a while with no reported issues" * tag 'tty-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (35 commits) tty: serial: ip22zilog: Fix section mispatch warning hvc/xen: Check console connection flag serial: sh-sci: Add support for RZ/G3L RSCI dt-bindings: serial: renesas,rsci: Document RZ/G3L SoC tty: atmel_serial: update outdated reference to atmel_tasklet_func() serial: xilinx_uartps: Drop unused include serial: qcom-geni: drop stray newline format specifier serial: 8250: loongson: Enable building on MIPS Loongson64 dt-bindings: serial: 8250: Add Loongson 3A4000 uart compatible serial: 8250_fintek: Add support for F81214E tty: tty_port: add workqueue to flip TTY buffer vt: support ITU-T T.416 color subparameters serial: qcom-geni: Fix RTS behavior with flow control tty: serial: imx: keep dma request disabled before dma transfer setup tty: serial: 8250: Add SystemBase Multi I/O cards serial: pic32_uart: allow driver to be compiled on all architectures with COMPILE_TEST serial: tegra: remove Kconfig dependency on APB DMA controller dt-bindings: serial: amlogic,meson-uart: Add compatible string for A9 dt-bindings: serial: atmel,at91-usart: add microchip,lan9691-usart serial: auart: check clk_enable() return in console write ...

Merge tag 'for-linus-7.1-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

2026-04-15T22:16:39+00:00

Pull xen updates from Juergen Gross: - fix an error path in drivers/xen/manage.c - fix the Xen console driver solving a boot hangup when the console backend isn't yet running - comment fix in the Xen swiotlb driver - hardening for Xen on Arm adding a more thorough validation - cleanup of the Xen grant table code hiding suspend/resume code for the case if CONFIG_HIBERNATE_CALLBACKS isn't defined * tag 'for-linus-7.1-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/grant-table: guard gnttab_suspend/resume with CONFIG_HIBERNATE_CALLBACKS hvc/xen: Check console connection flag xen/swiotlb: fix stale reference to swiotlb_unmap_page() xen/manage: unwind partial shutdown watcher setup on error ARM: xen: validate hypervisor compatible before parsing its version

Merge tag 'fbdev-for-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev

2026-04-15T15:37:45+00:00

Pull fbdev updates from Helge Deller: "A major refactorization by Thomas Zimmermann from SUSE regarding handling of console font data, addition of helpers for console font rotation and split into individual components for glyphs, fonts and the overall fbcon state. And there is the round of usual code cleanups and fixes: Cleanups: - atyfb: Remove unused fb_list (Geert Uytterhoeven) - goldfishfb, wmt_ge_rops: use devm_platform_ioremap_resource() (Amin GATTOUT) - matroxfb: Mark variable with __maybe_unused (Andy Shevchenko) - omapfb: Add missing error check for clk_get() (Chen Ni) - tdfxfb: Make the VGA register initialisation a bit more obvious (Daniel Palmer) - macfb: Replace deprecated strcpy with strscpy (Thorsten Blum) Fixes: - tdfxfb, udlfb: avoid divide-by-zero on FBIOPUT_VSCREENINFO (Greg Kroah-Hartman) - omap2: fix inconsistent lock returns in omapfb_mmap (Hongling Zeng) - viafb: check ioremap return value in viafb_lcd_get_mobile_state (Wang Jun)" * tag 'fbdev-for-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (40 commits) fbdev: udlfb: avoid divide-by-zero on FBIOPUT_VSCREENINFO fbdev: tdfxfb: avoid divide-by-zero on FBIOPUT_VSCREENINFO fbdev: omap2: fix inconsistent lock returns in omapfb_mmap MAINTAINERS: Add dedicated entry for fbcon fbcon: Put font-rotation state into separate struct fbcon: Fill cursor mask in helper function lib/fonts: Implement font rotation lib/fonts: Refactor glyph-rotation helpers lib/fonts: Refactor glyph-pattern helpers lib/fonts: Implement glyph rotation lib/fonts: Clean up Makefile lib/fonts: Provide helpers for calculating glyph pitch and size vt: Implement helpers for struct vc_font in source file fbcon: Avoid OOB font access if console rotation fails fbdev: atyfb: Remove unused fb_list fbdev: matroxfb: Mark variable with __maybe_unused to avoid W=1 build break fbdev: update help text for CONFIG_FB_NVIDIA fbdev: omapfb: Add missing error check for clk_get() fbdev: viafb: check ioremap return value in viafb_lcd_get_mobile_state lib/fonts: Remove internal symbols and macros from public header file ...

Merge tag 'pwrseq-updates-for-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

2026-04-14T03:28:22+00:00

Pull power sequencing updates from Bartosz Golaszewski: "For this release we have an extension of the pwrseq-pcie-m2 driver with support for PCIe M.2 Key E connectors. The rest of the commits fulfill a supporting role: document the hardware in DT bindings, provide required serdev helpers (this has been provided in an immutable branch to Rob Herring so you may see it in his PR as well) and is followed up by some Kconfig fixes from Arnd. Summary: - add support for the PCIe M.2 Key E connectors in pwrseq-pcie-m2 - describe PCIe M.2 Mechanical Key E connectors in DT bindings - add serdev helpers for looking up devices by OF nodes - minor serdev core rework to enable support for PCIe M.2 Key E connectors" * tag 'pwrseq-updates-for-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: power: sequencing: pcie-m2: add SERIAL_DEV_BUS dependency power: sequencing: pcie-m2: enforce PCI and OF dependencies power: sequencing: pcie-m2: Create serdev device for WCN7850 bluetooth power: sequencing: pcie-m2: Add support for PCIe M.2 Key E connectors dt-bindings: connector: Add PCIe M.2 Mechanical Key E connector dt-bindings: serial: Document the graph port serdev: Do not return -ENODEV from of_serdev_register_devices() if external connector is used serdev: Add an API to find the serdev controller associated with the devicetree node serdev: Convert to_serdev_*() helpers to macros and use container_of_const()

hvc/xen: Check console connection flag

2026-04-10T09:06:17+00:00

When the console out buffer is filled, __write_console() will return 0 as it cannot send any data. domU_write_console() will then spin in `while (len)` as len doesn't decrement until xenconsoled attaches. This would block a domU and nullify the parallelism of Hyperlaunch until dom0 userspace starts xenconsoled, which empties the buffer. Xen 4.21 added a connection field to the xen console page. This is set to XENCONSOLE_DISCONNECTED (1) when a domain is built, and xenconsoled will set it to XENCONSOLE_CONNECTED (0) when it connects. Update the hvc_xen driver to check the field. When the field is disconnected, drop the write with -ENOTCONN. We only drop the write when the field is XENCONSOLE_DISCONNECTED (1) to try for maximum compatibility. The Xen toolstack has historically zero initialized the console, so it should see XENCONSOLE_CONNECTED (0) by default. If an implemenation used uninitialized memory, only checking for XENCONSOLE_DISCONNECTED could have the lowest chance of not connecting. This lets the hyperlaunched domU boot without stalling. Once dom0 starts xenconsoled, xl console can be used to access the domU's hvc0. Paritally sync console.h from xen.git to bring in the new field. Reviewed-by: Stefano Stabellini Signed-off-by: Jason Andryuk Signed-off-by: Juergen Gross Message-ID: <20260318235326.14568-1-jason.andryuk@amd.com>

lib/fonts: Provide helpers for calculating glyph pitch and size

2026-04-07T15:38:07+00:00

Implement pitch and size calculation for a single font glyph in the new helpers font_glyph_pitch() and font_glyph_size(). Replace the instances where the calculations are open-coded. Note that in the case of fbcon console rotation, the parameters for a glyph's width and height might be reversed. This is intentional. v2: - fix typos in commit message Signed-off-by: Thomas Zimmermann Signed-off-by: Helge Deller

vt: Implement helpers for struct vc_font in source file

2026-04-07T15:38:06+00:00

Move the helpers vc_font_pitch() and vc_font_size() from the VT header file into source file. They are not called very often, so there's no benefit in keeping them in the headers. Also avoids including from the header. v2: - fix typo in commit description Signed-off-by: Thomas Zimmermann Acked-by: Greg Kroah-Hartman Signed-off-by: Helge Deller

tty: serial: ip22zilog: Fix section mispatch warning

2026-04-02T13:59:56+00:00

ip22zilog_prepare() is now called by driver probe routine, so it shouldn't be in the __init section any longer. Fixes: 3fc36ae6abd2 ("tty: serial: ip22zilog: Use platform device for probing") Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202604020945.c9jAvCPs-lkp@intel.com/ Signed-off-by: Thomas Bogendoerfer Link: https://patch.msgid.link/20260402102154.136620-1-tbogendoerfer@suse.de Signed-off-by: Greg Kroah-Hartman

serdev: Do not return -ENODEV from of_serdev_register_devices() if external connector is used

2026-03-31T07:48:43+00:00

If an external connector like M.2 is connected to the serdev controller in DT, then the serdev devices may be created dynamically by the connector driver. So do not return -ENODEV from of_serdev_register_devices() if the static nodes are not found and the graph node is used. Tested-by: Hans de Goede # ThinkPad T14s gen6 (arm64) Reviewed-by: Bartosz Golaszewski Signed-off-by: Manivannan Sadhasivam Reviewed-by: Rob Herring (Arm) Link: https://patch.msgid.link/20260326-pci-m2-e-v7-3-43324a7866e6@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski

serdev: Add an API to find the serdev controller associated with the devicetree node

2026-03-31T07:48:42+00:00

Add of_find_serdev_controller_by_node() API to find the serdev controller device associated with the devicetree node. Tested-by: Hans de Goede # ThinkPad T14s gen6 (arm64) Reviewed-by: Bartosz Golaszewski Signed-off-by: Manivannan Sadhasivam Reviewed-by: Rob Herring (Arm) Link: https://patch.msgid.link/20260326-pci-m2-e-v7-2-43324a7866e6@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski