kernel/linux.git/drivers/tty/tty_io.c, branch v4.19.16

USB: serial: console: fix reported terminal settings

2018-12-13T08:16:15+00:00

commit f51ccf46217c28758b1f3b5bc0ccfc00eca658b2 upstream. The USB-serial console implementation has never reported the actual terminal settings used. Despite storing the corresponding cflags in its struct console, these were never honoured on later tty open() where the tty termios would be left initialised to the driver defaults. Unlike the serial console implementation, the USB-serial code calls subdriver open() already at console setup. While calling set_termios() and write() before open() looks like it could work for some USB-serial drivers, others definitely do not expect this, so modelling this after serial core is going to be intrusive, if at all possible. Instead, use a (renamed) tty helper to save the termios data used at console setup so that the tty termios reflects the actual terminal settings after a subsequent tty open(). Note that the calls to tty_init_termios() (tty_driver_install()) and tty_save_termios() are serialised using the disconnect mutex. This specifically fixes a regression that was triggered by a recent change adding software flow control to the pl2303 driver: a getty trying to disable flow control while leaving the baud rate unchanged would now also set the baud rate to the driver default (prior to the flow-control change this had been a noop). Fixes: 7041d9c3f01b ("USB: serial: pl2303: add support for tx xon/xoff flow control") Cc: stable # 4.18 Cc: Florian Zumbiehl Reported-by: Jarkko Nikula Tested-by: Jarkko Nikula Acked-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

tty: check name length in tty_find_polling_driver()

2018-11-21T08:19:09+00:00

[ Upstream commit 33a1a7be198657c8ca26ad406c4d2a89b7162bcc ] The issue is found by a fuzzing test. If tty_find_polling_driver() recevies an incorrect input such as ',,' or '0b', the len becomes 0 and strncmp() always return 0. In this case, a null p->ops->poll_init() is called and it causes a kernel panic. Fix this by checking name length against zero in tty_find_polling_driver(). $echo ,, > /sys/module/kgdboc/parameters/kgdboc [ 20.804451] WARNING: CPU: 1 PID: 104 at drivers/tty/serial/serial_core.c:457 uart_get_baud_rate+0xe8/0x190 [ 20.804917] Modules linked in: [ 20.805317] CPU: 1 PID: 104 Comm: sh Not tainted 4.19.0-rc7ajb #8 [ 20.805469] Hardware name: linux,dummy-virt (DT) [ 20.805732] pstate: 20000005 (nzCv daif -PAN -UAO) [ 20.805895] pc : uart_get_baud_rate+0xe8/0x190 [ 20.806042] lr : uart_get_baud_rate+0xc0/0x190 [ 20.806476] sp : ffffffc06acff940 [ 20.806676] x29: ffffffc06acff940 x28: 0000000000002580 [ 20.806977] x27: 0000000000009600 x26: 0000000000009600 [ 20.807231] x25: ffffffc06acffad0 x24: 00000000ffffeff0 [ 20.807576] x23: 0000000000000001 x22: 0000000000000000 [ 20.807807] x21: 0000000000000001 x20: 0000000000000000 [ 20.808049] x19: ffffffc06acffac8 x18: 0000000000000000 [ 20.808277] x17: 0000000000000000 x16: 0000000000000000 [ 20.808520] x15: ffffffffffffffff x14: ffffffff00000000 [ 20.808757] x13: ffffffffffffffff x12: 0000000000000001 [ 20.809011] x11: 0101010101010101 x10: ffffff880d59ff5f [ 20.809292] x9 : ffffff880d59ff5e x8 : ffffffc06acffaf3 [ 20.809549] x7 : 0000000000000000 x6 : ffffff880d59ff5f [ 20.809803] x5 : 0000000080008001 x4 : 0000000000000003 [ 20.810056] x3 : ffffff900853e6b4 x2 : dfffff9000000000 [ 20.810693] x1 : ffffffc06acffad0 x0 : 0000000000000cb0 [ 20.811005] Call trace: [ 20.811214] uart_get_baud_rate+0xe8/0x190 [ 20.811479] serial8250_do_set_termios+0xe0/0x6f4 [ 20.811719] serial8250_set_termios+0x48/0x54 [ 20.811928] uart_set_options+0x138/0x1bc [ 20.812129] uart_poll_init+0x114/0x16c [ 20.812330] tty_find_polling_driver+0x158/0x200 [ 20.812545] configure_kgdboc+0xbc/0x1bc [ 20.812745] param_set_kgdboc_var+0xb8/0x150 [ 20.812960] param_attr_store+0xbc/0x150 [ 20.813160] module_attr_store+0x40/0x58 [ 20.813364] sysfs_kf_write+0x8c/0xa8 [ 20.813563] kernfs_fop_write+0x154/0x290 [ 20.813764] vfs_write+0xf0/0x278 [ 20.813951] __arm64_sys_write+0x84/0xf4 [ 20.814400] el0_svc_common+0xf4/0x1dc [ 20.814616] el0_svc_handler+0x98/0xbc [ 20.814804] el0_svc+0x8/0xc [ 20.822005] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 20.826913] Mem abort info: [ 20.827103] ESR = 0x84000006 [ 20.827352] Exception class = IABT (current EL), IL = 16 bits [ 20.827655] SET = 0, FnV = 0 [ 20.827855] EA = 0, S1PTW = 0 [ 20.828135] user pgtable: 4k pages, 39-bit VAs, pgdp = (____ptrval____) [ 20.828484] [0000000000000000] pgd=00000000aadee003, pud=00000000aadee003, pmd=0000000000000000 [ 20.829195] Internal error: Oops: 84000006 [#1] SMP [ 20.829564] Modules linked in: [ 20.829890] CPU: 1 PID: 104 Comm: sh Tainted: G W 4.19.0-rc7ajb #8 [ 20.830545] Hardware name: linux,dummy-virt (DT) [ 20.830829] pstate: 60000085 (nZCv daIf -PAN -UAO) [ 20.831174] pc : (null) [ 20.831457] lr : serial8250_do_set_termios+0x358/0x6f4 [ 20.831727] sp : ffffffc06acff9b0 [ 20.831936] x29: ffffffc06acff9b0 x28: ffffff9008d7c000 [ 20.832267] x27: ffffff900969e16f x26: 0000000000000000 [ 20.832589] x25: ffffff900969dfb0 x24: 0000000000000000 [ 20.832906] x23: ffffffc06acffad0 x22: ffffff900969e160 [ 20.833232] x21: 0000000000000000 x20: ffffffc06acffac8 [ 20.833559] x19: ffffff900969df90 x18: 0000000000000000 [ 20.833878] x17: 0000000000000000 x16: 0000000000000000 [ 20.834491] x15: ffffffffffffffff x14: ffffffff00000000 [ 20.834821] x13: ffffffffffffffff x12: 0000000000000001 [ 20.835143] x11: 0101010101010101 x10: ffffff880d59ff5f [ 20.835467] x9 : ffffff880d59ff5e x8 : ffffffc06acffaf3 [ 20.835790] x7 : 0000000000000000 x6 : ffffff880d59ff5f [ 20.836111] x5 : c06419717c314100 x4 : 0000000000000007 [ 20.836419] x3 : 0000000000000000 x2 : 0000000000000000 [ 20.836732] x1 : 0000000000000001 x0 : ffffff900969df90 [ 20.837100] Process sh (pid: 104, stack limit = 0x(____ptrval____)) [ 20.837396] Call trace: [ 20.837566] (null) [ 20.837816] serial8250_set_termios+0x48/0x54 [ 20.838089] uart_set_options+0x138/0x1bc [ 20.838570] uart_poll_init+0x114/0x16c [ 20.838834] tty_find_polling_driver+0x158/0x200 [ 20.839119] configure_kgdboc+0xbc/0x1bc [ 20.839380] param_set_kgdboc_var+0xb8/0x150 [ 20.839658] param_attr_store+0xbc/0x150 [ 20.839920] module_attr_store+0x40/0x58 [ 20.840183] sysfs_kf_write+0x8c/0xa8 [ 20.840183] sysfs_kf_write+0x8c/0xa8 [ 20.840440] kernfs_fop_write+0x154/0x290 [ 20.840702] vfs_write+0xf0/0x278 [ 20.840942] __arm64_sys_write+0x84/0xf4 [ 20.841209] el0_svc_common+0xf4/0x1dc [ 20.841471] el0_svc_handler+0x98/0xbc [ 20.841713] el0_svc+0x8/0xc [ 20.842057] Code: bad PC value [ 20.842764] ---[ end trace a8835d7de79aaadf ]--- [ 20.843134] Kernel panic - not syncing: Fatal exception [ 20.843515] SMP: stopping secondary CPUs [ 20.844289] Kernel Offset: disabled [ 20.844634] CPU features: 0x0,21806002 [ 20.844857] Memory Limit: none [ 20.845172] ---[ end Kernel panic - not syncing: Fatal exception ]--- Signed-off-by: Miles Chen Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

tty: Drop tty->count on tty_reopen() failure

2018-09-18T13:42:24+00:00

In case of tty_ldisc_reinit() failure, tty->count should be decremented back, otherwise we will never release_tty(). Tetsuo reported that it fixes noisy warnings on tty release like: pts pts4033: tty_release: tty->count(10529) != (#fd's(7) + #kopen's(0)) Fixes: commit 892d1fa7eaae ("tty: Destroy ldisc instance on hangup") Cc: stable@vger.kernel.org # v4.6+ Cc: Greg Kroah-Hartman Cc: Jiri Slaby Reviewed-by: Jiri Slaby Tested-by: Jiri Slaby Tested-by: Mark Rutland Tested-by: Tetsuo Handa Signed-off-by: Dmitry Safonov Signed-off-by: Greg Kroah-Hartman

Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

2018-08-21T20:47:29+00:00

Pull core signal handling updates from Eric Biederman: "It was observed that a periodic timer in combination with a sufficiently expensive fork could prevent fork from every completing. This contains the changes to remove the need for that restart. This set of changes is split into several parts: - The first part makes PIDTYPE_TGID a proper pid type instead something only for very special cases. The part starts using PIDTYPE_TGID enough so that in __send_signal where signals are actually delivered we know if the signal is being sent to a a group of processes or just a single process. - With that prep work out of the way the logic in fork is modified so that fork logically makes signals received while it is running appear to be received after the fork completes" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (22 commits) signal: Don't send signals to tasks that don't exist signal: Don't restart fork when signals come in. fork: Have new threads join on-going signal group stops fork: Skip setting TIF_SIGPENDING in ptrace_init_task signal: Add calculate_sigpending() fork: Unconditionally exit if a fatal signal is pending fork: Move and describe why the code examines PIDNS_ADDING signal: Push pid type down into complete_signal. signal: Push pid type down into __send_signal signal: Push pid type down into send_signal signal: Pass pid type into do_send_sig_info signal: Pass pid type into send_sigio_to_task & send_sigurg_to_task signal: Pass pid type into group_send_sig_info signal: Pass pid and pid type into send_sigqueue posix-timers: Noralize good_sigevent signal: Use PIDTYPE_TGID to clearly store where file signals will be sent pid: Implement PIDTYPE_TGID pids: Move the pgrp and session pid pointers from task_struct to signal_struct kvm: Don't open code task_pid in kvm_vcpu_ioctl pids: Compute task_tgid using signal->leader_pid ...

signal: Use PIDTYPE_TGID to clearly store where file signals will be sent

2018-07-21T15:43:12+00:00

When f_setown is called a pid and a pid type are stored. Replace the use of PIDTYPE_PID with PIDTYPE_TGID as PIDTYPE_TGID goes to the entire thread group. Replace the use of PIDTYPE_MAX with PIDTYPE_PID as PIDTYPE_PID now is only for a thread. Update the users of __f_setown to use PIDTYPE_TGID instead of PIDTYPE_PID. For now the code continues to capture task_pid (when task_tgid would really be appropriate), and iterate on PIDTYPE_PID (even when type == PIDTYPE_TGID) out of an abundance of caution to preserve existing behavior. Oleg Nesterov suggested using the test to ensure we use PIDTYPE_PID for tgid lookup also be used to avoid taking the tasklist lock. Suggested-by: Oleg Nesterov Signed-off-by: "Eric W. Biederman"

tty: use 64-bit timstamp

2018-06-28T12:07:54+00:00

The automated VFS conversion to timespec64 has left one caller of the deprecated get_seconds() function in the tty driver, this cleans it up to call ktime_get_real_seconds() instead, fixing the possible overflow. Signed-off-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman

vfs: change inode times to use struct timespec64

2018-06-05T23:57:31+00:00

struct timespec is not y2038 safe. Transition vfs to use y2038 safe struct timespec64 instead. The change was made with the help of the following cocinelle script. This catches about 80% of the changes. All the header file and logic changes are included in the first 5 rules. The rest are trivial substitutions. I avoid changing any of the function signatures or any other filesystem specific data structures to keep the patch simple for review. The script can be a little shorter by combining different cases. But, this version was sufficient for my usecase. virtual patch @ depends on patch @ identifier now; @@ - struct timespec + struct timespec64 current_time ( ... ) { - struct timespec now = current_kernel_time(); + struct timespec64 now = current_kernel_time64(); ... - return timespec_trunc( + return timespec64_trunc( ... ); } @ depends on patch @ identifier xtime; @@ struct $ iattr \| inode \| kstat $ { ... - struct timespec xtime; + struct timespec64 xtime; ... } @ depends on patch @ identifier t; @@ struct inode_operations { ... int (*update_time) (..., - struct timespec t, + struct timespec64 t, ...); ... } @ depends on patch @ identifier t; identifier fn_update_time =~ "update_time$"; @@ fn_update_time (..., - struct timespec *t, + struct timespec64 *t, ...) { ... } @ depends on patch @ identifier t; @@ lease_get_mtime( ... , - struct timespec *t + struct timespec64 *t ) { ... } @te depends on patch forall@ identifier ts; local idexpression struct inode *inode_node; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn_update_time =~ "update_time$"; identifier fn; expression e, E3; local idexpression struct inode *node1; local idexpression struct inode *node2; local idexpression struct iattr *attr1; local idexpression struct iattr *attr2; local idexpression struct iattr attr; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; @@ ( ( - struct timespec ts; + struct timespec64 ts; | - struct timespec ts = current_time(inode_node); + struct timespec64 ts = current_time(inode_node); ) <+... when != ts ( - timespec_equal(&inode_node->i_xtime, &ts) + timespec64_equal(&inode_node->i_xtime, &ts) | - timespec_equal(&ts, &inode_node->i_xtime) + timespec64_equal(&ts, &inode_node->i_xtime) | - timespec_compare(&inode_node->i_xtime, &ts) + timespec64_compare(&inode_node->i_xtime, &ts) | - timespec_compare(&ts, &inode_node->i_xtime) + timespec64_compare(&ts, &inode_node->i_xtime) | ts = current_time(e) | fn_update_time(..., &ts,...) | inode_node->i_xtime = ts | node1->i_xtime = ts | ts = inode_node->i_xtime | <+... attr1->ia_xtime ...+> = ts | ts = attr1->ia_xtime | ts.tv_sec | ts.tv_nsec | btrfs_set_stack_timespec_sec(..., ts.tv_sec) | btrfs_set_stack_timespec_nsec(..., ts.tv_nsec) | - ts = timespec64_to_timespec( + ts = ... -) | - ts = ktime_to_timespec( + ts = ktime_to_timespec64( ...) | - ts = E3 + ts = timespec_to_timespec64(E3) | - ktime_get_real_ts(&ts) + ktime_get_real_ts64(&ts) | fn(..., - ts + timespec64_to_timespec(ts) ,...) ) ...+> ( <... when != ts - return ts; + return timespec64_to_timespec(ts); ...> ) | - timespec_equal(&node1->i_xtime1, &node2->i_xtime2) + timespec64_equal(&node1->i_xtime2, &node2->i_xtime2) | - timespec_equal(&node1->i_xtime1, &attr2->ia_xtime2) + timespec64_equal(&node1->i_xtime2, &attr2->ia_xtime2) | - timespec_compare(&node1->i_xtime1, &node2->i_xtime2) + timespec64_compare(&node1->i_xtime1, &node2->i_xtime2) | node1->i_xtime1 = - timespec_trunc(attr1->ia_xtime1, + timespec64_trunc(attr1->ia_xtime1, ...) | - attr1->ia_xtime1 = timespec_trunc(attr2->ia_xtime2, + attr1->ia_xtime1 = timespec64_trunc(attr2->ia_xtime2, ...) | - ktime_get_real_ts(&attr1->ia_xtime1) + ktime_get_real_ts64(&attr1->ia_xtime1) | - ktime_get_real_ts(&attr.ia_xtime1) + ktime_get_real_ts64(&attr.ia_xtime1) ) @ depends on patch @ struct inode *node; struct iattr *attr; identifier fn; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; expression e; @@ ( - fn(node->i_xtime); + fn(timespec64_to_timespec(node->i_xtime)); | fn(..., - node->i_xtime); + timespec64_to_timespec(node->i_xtime)); | - e = fn(attr->ia_xtime); + e = fn(timespec64_to_timespec(attr->ia_xtime)); ) @ depends on patch forall @ struct inode *node; struct iattr *attr; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); fn (..., - &attr->ia_xtime, + &ts, ...); ) ...+> } @ depends on patch forall @ struct inode *node; struct iattr *attr; struct kstat *stat; identifier ia_xtime =~ "^ia_[acm]time$"; identifier i_xtime =~ "^i_[acm]time$"; identifier xtime =~ "^[acm]time$"; identifier fn, ret; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime); + &ts); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime); + &ts); | + ts = timespec64_to_timespec(stat->xtime); ret = fn (..., - &stat->xtime); + &ts); ) ...+> } @ depends on patch @ struct inode *node; struct inode *node2; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier i_xtime3 =~ "^i_[acm]time$"; struct iattr *attrp; struct iattr *attrp2; struct iattr attr ; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; struct kstat *stat; struct kstat stat1; struct timespec64 ts; identifier xtime =~ "^[acmb]time$"; expression e; @@ ( ( node->i_xtime2 \| attrp->ia_xtime2 \| attr.ia_xtime2 \) = node->i_xtime1 ; | node->i_xtime2 = $ node2->i_xtime1 \| timespec64_trunc(...) $; | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = $ts \| current_time(...) $; | node->i_xtime1 = node->i_xtime3 = $ts \| current_time(...) $; | stat->xtime = node2->i_xtime1; | stat1.xtime = node2->i_xtime1; | ( node->i_xtime2 \| attrp->ia_xtime2 \) = attrp->ia_xtime1 ; | ( attrp->ia_xtime1 \| attr.ia_xtime1 \) = attrp2->ia_xtime2; | - e = node->i_xtime1; + e = timespec64_to_timespec( node->i_xtime1 ); | - e = attrp->ia_xtime1; + e = timespec64_to_timespec( attrp->ia_xtime1 ); | node->i_xtime1 = current_time(...); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | - node->i_xtime1 = e; + node->i_xtime1 = timespec_to_timespec64(e); ) Signed-off-by: Deepa Dinamani Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc:

tty: Don't call panic() at tty_ldisc_init()

2018-04-23T09:05:52+00:00

syzbot is reporting kernel panic [1] triggered by memory allocation failure at tty_ldisc_get() from tty_ldisc_init(). But since both tty_ldisc_get() and caller of tty_ldisc_init() can cleanly handle errors, tty_ldisc_init() does not need to call panic() when tty_ldisc_get() failed. [1] https://syzkaller.appspot.com/bug?id=883431818e036ae6a9981156a64b821110f39187 Signed-off-by: Tetsuo Handa Reported-by: syzbot Cc: Greg Kroah-Hartman Cc: Jiri Slaby Cc: stable Signed-off-by: Greg Kroah-Hartman

tty: make n_tty_read() always abort if hangup is in progress

2018-02-28T12:21:10+00:00

A tty is hung up by __tty_hangup() setting file->f_op to hung_up_tty_fops, which is skipped on ttys whose write operation isn't tty_write(). This means that, for example, /dev/console whose write op is redirected_tty_write() is never actually marked hung up. Because n_tty_read() uses the hung up status to decide whether to abort the waiting readers, the lack of hung-up marking can lead to the following scenario. 1. A session contains two processes. The leader and its child. The child ignores SIGHUP. 2. The leader exits and starts disassociating from the controlling terminal (/dev/console). 3. __tty_hangup() skips setting f_op to hung_up_tty_fops. 4. SIGHUP is delivered and ignored. 5. tty_ldisc_hangup() is invoked. It wakes up the waits which should clear the read lockers of tty->ldisc_sem. 6. The reader wakes up but because tty_hung_up_p() is false, it doesn't abort and goes back to sleep while read-holding tty->ldisc_sem. 7. The leader progresses to tty_ldisc_lock() in tty_ldisc_hangup() and is now stuck in D sleep indefinitely waiting for tty->ldisc_sem. The following is Alan's explanation on why some ttys aren't hung up. http://lkml.kernel.org/r/20171101170908.6ad08580@alans-desktop 1. It broke the serial consoles because they would hang up and close down the hardware. With tty_port that *should* be fixable properly for any cases remaining. 2. The console layer was (and still is) completely broken and doens't refcount properly. So if you turn on console hangups it breaks (as indeed does freeing consoles and half a dozen other things). As neither can be fixed quickly, this patch works around the problem by introducing a new flag, TTY_HUPPING, which is used solely to tell n_tty_read() that hang-up is in progress for the console and the readers should be aborted regardless of the hung-up status of the device. The following is a sample hung task warning caused by this issue. INFO: task agetty:2662 blocked for more than 120 seconds. Not tainted 4.11.3-dbg-tty-lockup-02478-gfd6c7ee-dirty #28 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 0 2662 1 0x00000086 Call Trace: __schedule+0x267/0x890 schedule+0x36/0x80 schedule_timeout+0x23c/0x2e0 ldsem_down_write+0xce/0x1f6 tty_ldisc_lock+0x16/0x30 tty_ldisc_hangup+0xb3/0x1b0 __tty_hangup+0x300/0x410 disassociate_ctty+0x6c/0x290 do_exit+0x7ef/0xb00 do_group_exit+0x3f/0xa0 get_signal+0x1b3/0x5d0 do_signal+0x28/0x660 exit_to_usermode_loop+0x46/0x86 do_syscall_64+0x9c/0xb0 entry_SYSCALL64_slow_path+0x25/0x25 The following is the repro. Run "$PROG /dev/console". The parent process hangs in D state. #include #include #include #include #include #include #include #include #include #include #include #include int main(int argc, char **argv) { struct sigaction sact = { .sa_handler = SIG_IGN }; struct timespec ts1s = { .tv_sec = 1 }; pid_t pid; int fd; if (argc < 2) { fprintf(stderr, "test-hung-tty /dev/$TTY\n"); return 1; } /* fork a child to ensure that it isn't already the session leader */ pid = fork(); if (pid < 0) { perror("fork"); return 1; } if (pid > 0) { /* top parent, wait for everyone */ while (waitpid(-1, NULL, 0) >= 0) ; if (errno != ECHILD) perror("waitpid"); return 0; } /* new session, start a new session and set the controlling tty */ if (setsid() < 0) { perror("setsid"); return 1; } fd = open(argv[1], O_RDWR); if (fd < 0) { perror("open"); return 1; } if (ioctl(fd, TIOCSCTTY, 1) < 0) { perror("ioctl"); return 1; } /* fork a child, sleep a bit and exit */ pid = fork(); if (pid < 0) { perror("fork"); return 1; } if (pid > 0) { nanosleep(&ts1s, NULL); printf("Session leader exiting\n"); exit(0); } /* * The child ignores SIGHUP and keeps reading from the controlling * tty. Because SIGHUP is ignored, the child doesn't get killed on * parent exit and the bug in n_tty makes the read(2) block the * parent's control terminal hangup attempt. The parent ends up in * D sleep until the child is explicitly killed. */ sigaction(SIGHUP, &sact, NULL); printf("Child reading tty\n"); while (1) { char buf[1024]; if (read(fd, buf, sizeof(buf)) < 0) { perror("read"); return 1; } } return 0; } Signed-off-by: Tejun Heo Cc: Alan Cox Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

vfs: do bulk POLL* -> EPOLL* replacement

2018-02-11T22:34:03+00:00

This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^$[^\"]*$$\$/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro Signed-off-by: Linus Torvalds