kernel/linux.git/drivers/tty/sysrq.c, branch v6.1.168

tty/sysrq: replace smp_processor_id() with get_cpu()

2023-11-28T17:07:08+00:00

commit dd976a97d15b47656991e185a94ef42a0fa5cfd4 upstream. The smp_processor_id() shouldn't be called from preemptible code. Instead use get_cpu() and put_cpu() which disables preemption in addition to getting the processor id. Enable preemption back after calling schedule_work() to make sure that the work gets scheduled on all cores other than the current core. We want to avoid a scenario where current core's stack trace is printed multiple times and one core's stack trace isn't printed because of scheduling of current task. This fixes the following bug: [ 119.143590] sysrq: Show backtrace of all active CPUs [ 119.143902] BUG: using smp_processor_id() in preemptible [00000000] code: bash/873 [ 119.144586] caller is debug_smp_processor_id+0x20/0x30 [ 119.144827] CPU: 6 PID: 873 Comm: bash Not tainted 5.10.124-dirty #3 [ 119.144861] Hardware name: QEMU QEMU Virtual Machine, BIOS 2023.05-1 07/22/2023 [ 119.145053] Call trace: [ 119.145093] dump_backtrace+0x0/0x1a0 [ 119.145122] show_stack+0x18/0x70 [ 119.145141] dump_stack+0xc4/0x11c [ 119.145159] check_preemption_disabled+0x100/0x110 [ 119.145175] debug_smp_processor_id+0x20/0x30 [ 119.145195] sysrq_handle_showallcpus+0x20/0xc0 [ 119.145211] __handle_sysrq+0x8c/0x1a0 [ 119.145227] write_sysrq_trigger+0x94/0x12c [ 119.145247] proc_reg_write+0xa8/0xe4 [ 119.145266] vfs_write+0xec/0x280 [ 119.145282] ksys_write+0x6c/0x100 [ 119.145298] __arm64_sys_write+0x20/0x30 [ 119.145315] el0_svc_common.constprop.0+0x78/0x1e4 [ 119.145332] do_el0_svc+0x24/0x8c [ 119.145348] el0_svc+0x10/0x20 [ 119.145364] el0_sync_handler+0x134/0x140 [ 119.145381] el0_sync+0x180/0x1c0 Cc: jirislaby@kernel.org Cc: stable@vger.kernel.org Fixes: 47cab6a722d4 ("debug lockups: Improve lockup detection, fix generic arch fallback") Signed-off-by: Muhammad Usama Anjum Link: https://lore.kernel.org/r/20231009162021.3607632-1-usama.anjum@collabora.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman

Merge branch 'rework/kthreads' into for-linus

2022-06-23T17:11:28+00:00

Revert "printk: add functions to prefer direct printing"

2022-06-23T16:41:40+00:00

This reverts commit 2bb2b7b57f81255c13f4395ea911d6bdc70c9fe2. The testing of 5.19 release candidates revealed missing synchronization between early and regular console functionality. It would be possible to start the console kthreads later as a workaround. But it is clear that console lock serialized console drivers between each other. It opens a big area of possible problems that were not considered by people involved in the development and review. printk() is crucial for debugging kernel issues and console output is very important part of it. The number of consoles is huge and a proper review would take some time. As a result it need to be reverted for 5.19. Link: https://lore.kernel.org/r/YrBdjVwBOVgLfHyb@alley Signed-off-by: Petr Mladek Link: https://lore.kernel.org/r/20220623145157.21938-7-pmladek@suse.com

Merge tag 'tty-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2022-06-03T18:08:40+00:00

Pull tty and serial driver updates from Greg KH: "Here is the big set of tty and serial driver updates for 5.19-rc1. Lots of tiny cleanups in here, the major stuff is: - termbit cleanups and unification by Ilpo. A much needed change that goes a long way to making things simpler for all of the different arches - tty documentation cleanups and movements to their own place in the documentation tree - old tty driver cleanups and fixes from Jiri to bring some existing drivers into the modern world - RS485 cleanups and unifications to make it easier for individual drivers to support this mode instead of having to duplicate logic in each driver - Lots of 8250 driver updates and additions - new device id additions - n_gsm continued fixes and cleanups - other minor serial driver updates and cleanups All of these have been in linux-next for weeks with no reported issues" * tag 'tty-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (166 commits) tty: Rework receive flow control char logic pcmcia: synclink_cs: Don't allow CS5-6 serial: stm32-usart: Correct CSIZE, bits, and parity serial: st-asc: Sanitize CSIZE and correct PARENB for CS7 serial: sifive: Sanitize CSIZE and c_iflag serial: sh-sci: Don't allow CS5-6 serial: txx9: Don't allow CS5-6 serial: rda-uart: Don't allow CS5-6 serial: digicolor-usart: Don't allow CS5-6 serial: uartlite: Fix BRKINT clearing serial: cpm_uart: Fix build error without CONFIG_SERIAL_CPM_CONSOLE serial: core: Do stop_rx in suspend path for console if console_suspend is disabled tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find suitable frequency with call to clk_round_rate. dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registers serial: 8250_fintek: Check SER_RS485_RTS_* only with RS485 Revert "serial: 8250_mtk: Make sure to select the right FEATURE_SEL" serial: msm_serial: disable interrupts in __msm_console_write() serial: meson: acquire port->lock in startup() serial: 8250_dw: Use dev_err_probe() serial: 8250_dw: Use devm_add_action_or_reset() ...

sysrq: do not omit current cpu when showing backtrace of all active CPUs

2022-04-26T11:24:42+00:00

The backtrace of current CPU also should be printed as it is active. This change add stack trace for current CPU and print a hint for idle CPU for the generic workqueue based printing. (x86 already does this) Now it looks like below: [ 279.401567] sysrq: Show backtrace of all active CPUs [ 279.407234] sysrq: CPU5: [ 279.407505] Call Trace: [ 279.408789] [] dump_backtrace+0x2c/0x3a [ 279.411698] [] show_stack+0x32/0x3e [ 279.411809] [] sysrq_handle_showallcpus+0x4c/0xc6 [ 279.411929] [] __handle_sysrq+0x106/0x26c [ 279.412034] [] write_sysrq_trigger+0x64/0x74 [ 279.412139] [] proc_reg_write+0x8e/0xe2 [ 279.412252] [] vfs_write+0x90/0x2be [ 279.412362] [] ksys_write+0xa6/0xce [ 279.412467] [] sys_write+0x2a/0x38 [ 279.412689] [] ret_from_syscall+0x0/0x2 [ 279.417173] sysrq: CPU6: backtrace skipped as idling [ 279.417185] sysrq: CPU4: backtrace skipped as idling [ 279.417187] sysrq: CPU0: backtrace skipped as idling [ 279.417181] sysrq: CPU7: backtrace skipped as idling [ 279.417190] sysrq: CPU1: backtrace skipped as idling [ 279.417193] sysrq: CPU3: backtrace skipped as idling [ 279.417219] sysrq: CPU2: [ 279.419179] Call Trace: [ 279.419440] [] dump_backtrace+0x2c/0x3a [ 279.419782] [] show_stack+0x32/0x3e [ 279.420015] [] showacpu+0x5c/0x96 [ 279.420317] [] flush_smp_call_function_queue+0xd6/0x218 [ 279.420569] [] generic_smp_call_function_single_interrupt+0x14/0x1c [ 279.420798] [] handle_IPI+0xaa/0x13a [ 279.421024] [] riscv_intc_irq+0x56/0x70 [ 279.421274] [] generic_handle_arch_irq+0x6a/0xfa [ 279.421518] [] ret_from_exception+0x0/0x10 [ 279.421750] [] rcu_idle_enter+0x16/0x1e Signed-off-by: Changbin Du Link: https://lore.kernel.org/r/20220117154300.2808-1-changbin.du@gmail.com Signed-off-by: Greg Kroah-Hartman

printk: add functions to prefer direct printing

2022-04-22T19:30:58+00:00

Once kthread printing is available, console printing will no longer occur in the context of the printk caller. However, there are some special contexts where it is desirable for the printk caller to directly print out kernel messages. Using pr_flush() to wait for threaded printers is only possible if the caller is in a sleepable context and the kthreads are active. That is not always the case. Introduce printk_prefer_direct_enter() and printk_prefer_direct_exit() functions to explicitly (and globally) activate/deactivate preferred direct console printing. The term "direct console printing" refers to printing to all enabled consoles from the context of the printk caller. The term "prefer" is used because this type of printing is only best effort. If the console is currently locked or other printers are already actively printing, the printk caller will need to rely on the other contexts to handle the printing. This preferred direct printing is how all printing has been handled until now (unless it was explicitly deferred). When kthread printing is introduced, there may be some unanticipated problems due to kthreads being unable to flush important messages. In order to minimize such risks, preferred direct printing is activated for the primary important messages when the system experiences general types of major errors. These are: - emergency reboot/shutdown - cpu and rcu stalls - hard and soft lockups - hung tasks - warn - sysrq Note that since kthread printing does not yet exist, no behavior changes result from this commit. This is only implementing the counter and marking the various places where preferred direct printing is active. Signed-off-by: John Ogness Reviewed-by: Petr Mladek Acked-by: Paul E. McKenney # for RCU Signed-off-by: Petr Mladek Link: https://lore.kernel.org/r/20220421212250.565456-13-john.ogness@linutronix.de

tty/sysrq: change the definition of sysrq_key_table's element to make it more readable

2022-04-22T14:22:53+00:00

The definition of sysrq_key_table's elements, like sysrq_thaw_op and sysrq_showallcpus_op are not consistent with sysrq_ftrace_dump_op, Consistency makes code more readable. Reviewed-by: Jiri Slaby Signed-off-by: Junwen Wu Link: https://lore.kernel.org/r/20220418153703.97705-1-wudaemon@163.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'tty-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2021-11-04T16:09:37+00:00

Pull tty / serial driver updates from Greg KH: "Here is the big set of tty and serial driver updates for 5.16-rc1. Nothing major in here at all, just lots of tiny serial and tty driver updates for various reported things, and some good cleanups. These include: - more good tty api cleanups from Jiri - stm32 serial driver updates - softlockup fix for non-preempt systems under high serial load - rpmsg serial driver update - 8250 drivers updates and fixes - n_gsm line discipline fixes and updates as people are finally starting to use it. All of these have been in linux-next for a while now with no reported issues" * tag 'tty-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (86 commits) tty: Fix extra "not" in TTY_DRIVER_REAL_RAW description serial: cpm_uart: Protect udbg definitions by CONFIG_SERIAL_CPM_CONSOLE tty: rpmsg: Define tty name via constant string literal tty: rpmsg: Add pr_fmt() to prefix messages tty: rpmsg: Use dev_err_probe() in ->probe() tty: rpmsg: Unify variable used to keep an error code tty: rpmsg: Assign returned id to a local variable serial: stm32: push DMA RX data before suspending serial: stm32: terminate / restart DMA transfer at suspend / resume serial: stm32: rework RX dma initialization and release serial: 8250_pci: Remove empty stub pci_quatech_exit() serial: 8250_pci: Replace custom pci_match_id() implementation serial: xilinx_uartps: Fix race condition causing stuck TX serial: sunzilog: Mark sunzilog_putchar() __maybe_unused Revert "tty: hvc: pass DMA capable memory to put_chars()" Revert "virtio-console: remove unnecessary kmemdup()" serial: 8250_pci: Replace dev_*() by pci_*() macros serial: 8250_pci: Get rid of redundant 'else' keyword serial: 8250_pci: Refactor the loop in pci_ite887x_init() tty: add rpmsg driver ...

workqueue: Introduce show_one_worker_pool and show_one_workqueue.

2021-10-20T16:19:03+00:00

Currently show_workqueue_state shows the state of all workqueues and of all worker pools. In certain cases we may need to dump state of only a specific workqueue or worker pool. For example in destroy_workqueue we only need to show state of the workqueue which is getting destroyed. So rename show_workqueue_state to show_all_workqueues(to signify it dumps state of all busy workqueues) and divide it into more granular functions (show_one_workqueue and show_one_worker_pool), that would show states of individual workqueues and worker pools and can be used in cases such as the one mentioned above. Also, as mentioned earlier, make destroy_workqueue dump data pertaining to only the workqueue that is being destroyed and make user(s) of earlier interface(show_workqueue_state), use new interface (show_all_workqueues). Signed-off-by: Imran Khan Signed-off-by: Tejun Heo

tty/sysrq: More intuitive Shift handling

2021-10-10T13:19:43+00:00

Make Alt-SysRq-Shift- behave like Alt-Shift-SysRq-. Acked-by: Pavel Machek Signed-off-by: Oskari Pirhonen Link: https://lore.kernel.org/r/YU/6SCmUr9qGkqBu@dj3ntoo Signed-off-by: Greg Kroah-Hartman