kernel/linux.git/drivers/tty/serial, branch v4.19.39

serial: ar933x_uart: Fix build failure with disabled console

2019-05-04T07:20:13+00:00

[ Upstream commit 72ff51d8dd262d1fef25baedc2ac35116435be47 ] Andrey has reported on OpenWrt's bug tracking system[1], that he currently can't use ar93xx_uart as pure serial UART without console (CONFIG_SERIAL_8250_CONSOLE and CONFIG_SERIAL_AR933X_CONSOLE undefined), because compilation ends with following error: ar933x_uart.c: In function 'ar933x_uart_console_write': ar933x_uart.c:550:14: error: 'struct uart_port' has no member named 'sysrq' So this patch moves all the code related to console handling behind series of CONFIG_SERIAL_AR933X_CONSOLE ifdefs. 1. https://bugs.openwrt.org/index.php?do=details&task_id=2152 Cc: Greg Kroah-Hartman Cc: Jiri Slaby Cc: Andrey Batyiev Reported-by: Andrey Batyiev Tested-by: Andrey Batyiev Signed-off-by: Petr Štetiar Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin (Microsoft)

sc16is7xx: missing unregister/delete driver on error in sc16is7xx_init()

2019-05-04T07:20:13+00:00

[ Upstream commit ac0cdb3d990108df795b676cd0d0e65ac34b2273 ] Add the missing uart_unregister_driver() and i2c_del_driver() before return from sc16is7xx_init() in the error handling case. Signed-off-by: Mao Wenan Reviewed-by: Vladimir Zapolskiy Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin (Microsoft)

serial: sh-sci: Fix HSCIF RX sampling point calculation

2019-04-27T07:36:36+00:00

commit ace965696da2611af759f0284e26342b7b6cec89 upstream. There are several issues with the formula used for calculating the deviation from the intended rate: 1. While min_err and last_stop are signed, srr and baud are unsigned. Hence the signed values are promoted to unsigned, which will lead to a bogus value of deviation if min_err is negative, 2. Srr is the register field value, which is one less than the actual sampling rate factor, 3. The divisions do not use rounding. Fix this by casting unsigned variables to int, adding one to srr, and using a single DIV_ROUND_CLOSEST(). Fixes: 63ba1e00f178a448 ("serial: sh-sci: Support for HSCIF RX sampling point adjustment") Signed-off-by: Geert Uytterhoeven Reviewed-by: Mukesh Ojha Cc: stable Reviewed-by: Ulrich Hecht Signed-off-by: Greg Kroah-Hartman

serial: sh-sci: Fix HSCIF RX sampling point adjustment

2019-04-27T07:36:36+00:00

commit 6b87784b53592a90d21576be8eff688b56d93cce upstream. The calculation of the sampling point has min() and max() exchanged. Fix this by using the clamp() helper instead. Fixes: 63ba1e00f178a448 ("serial: sh-sci: Support for HSCIF RX sampling point adjustment") Signed-off-by: Geert Uytterhoeven Reviewed-by: Ulrich Hecht Reviewed-by: Wolfram Sang Acked-by: Dirk Behme Cc: stable Reviewed-by: Simon Horman Signed-off-by: Greg Kroah-Hartman

serial: uartps: console_setup() can't be placed to init section

2019-04-20T07:16:01+00:00

[ Upstream commit 4bb1ce2350a598502b23088b169e16b43d4bc639 ] When console device is rebinded, console_setup() is called again. But marking it as __init means that function will be clear after boot is complete. If console device is binded again console_setup() is not found and error "Unable to handle kernel paging request at virtual address" is reported. Signed-off-by: Michal Simek Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

serial: 8250_pxa: honor the port number from devicetree

2019-04-05T20:33:01+00:00

[ Upstream commit fe9ed6d2483fda55465f32924fb15bce0fac3fac ] Like the other OF-enabled drivers, use the port number from the firmware if the devicetree specifies an alias: aliases { ... serial2 = &uart2; /* Should be ttyS2 */ } This is how the deprecated pxa.c driver behaved, switching to 8250_pxa messes up the numbering. Signed-off-by: Lubomir Rintel Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

tty/serial: atmel: RS485 HD w/DMA: enable RX after TX is stopped

2019-04-05T20:32:55+00:00

commit 69646d7a3689fbe1a65ae90397d22ac3f1b8d40f upstream. In half-duplex operation, RX should be started after TX completes. If DMA is used, there is a case when the DMA transfer completes but the TX FIFO is not emptied, so the RX cannot be restarted just yet. Use a boolean variable to store this state and rearm TX interrupt mask to be signaled again that the transfer finished. In interrupt transmit handler this variable is used to start RX. A warning message is generated if RX is activated before TX fifo is cleared. Fixes: b389f173aaa1 ("tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done") Signed-off-by: Razvan Stefanescu Acked-by: Richard Genoud Cc: stable Signed-off-by: Greg Kroah-Hartman

tty/serial: atmel: Add is_half_duplex helper

2019-04-05T20:32:55+00:00

commit f3040983132bf3477acd45d2452a906e67c2fec9 upstream. Use a helper function to check that a port needs to use half duplex communication, replacing several occurrences of multi-line bit checking. Fixes: b389f173aaa1 ("tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done") Cc: stable Signed-off-by: Razvan Stefanescu Acked-by: Richard Genoud Signed-off-by: Greg Kroah-Hartman

Disable kgdboc failed by echo space to /sys/module/kgdboc/parameters/kgdboc

2019-04-03T04:26:26+00:00

commit 3ec8002951ea173e24b466df1ea98c56b7920e63 upstream. Echo "" to /sys/module/kgdboc/parameters/kgdboc will fail with "No such device” error. This is caused by function "configure_kgdboc" who init err to ENODEV when the config is empty (legal input) the code go out with ENODEV returned. Fixes: 2dd453168643 ("kgdboc: Fix restrict error") Signed-off-by: Wentao Wang Cc: stable Acked-by: Daniel Thompson Signed-off-by: Greg Kroah-Hartman

serial: sh-sci: Fix setting SCSCR_TIE while transferring data

2019-04-03T04:26:25+00:00

commit 93bcefd4c6bad4c69dbc4edcd3fbf774b24d930d upstream. We disable transmission interrupt (clear SCSCR_TIE) after all data has been transmitted (if uart_circ_empty(xmit)). While transmitting, if the data is still in the tty buffer, re-enable the SCSCR_TIE bit, which was done at sci_start_tx(). This is unnecessary processing, wasting CPU operation if the data transmission length is large. And further, transmit end, FIFO empty bits disabling have also been performed in the step above. Signed-off-by: Hoan Nguyen An Cc: stable Signed-off-by: Greg Kroah-Hartman