kernel/linux.git/drivers/tty/serial, branch v3.2.95

serial: sh-sci: Fix panic when serial console and DMA are enabled

2017-08-26T01:13:57+00:00

commit 3c9101766b502a0163d1d437fada5801cf616be2 upstream. This patch fixes an issue that kernel panic happens when DMA is enabled and we press enter key while the kernel booting on the serial console. * An interrupt may occur after sci_request_irq(). * DMA transfer area is initialized by setup_timer() in sci_request_dma() and used in interrupt. If an interrupt occurred between sci_request_irq() and setup_timer() in sci_request_dma(), DMA transfer area has not been initialized yet. So, this patch changes the order of sci_request_irq() and sci_request_dma(). Fixes: 73a19e4c0301 ("serial: sh-sci: Add DMA support.") Signed-off-by: Takatoshi Akiyama [Shimoda changes the commit log] Signed-off-by: Yoshihiro Shimoda Signed-off-by: Greg Kroah-Hartman [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings

serial: mxs-auart: Fix baudrate calculation

2017-07-18T17:38:39+00:00

commit a6040bc610554c66088fda3608ae5d6307c548e4 upstream. The reference manual for the i.MX28 recommends to calculate the divisor as divisor = (UARTCLK * 32) / baud rate, rounded to the nearest integer , so let's do this. For a typical setup of UARTCLK = 24 MHz and baud rate = 115200 this changes the divisor from 6666 to 6667 and so the actual baud rate improves from 115211.521 Bd (error ≅ 0.01 %) to 115194.240 Bd (error ≅ 0.005 %). Signed-off-by: Uwe Kleine-König Signed-off-by: Greg Kroah-Hartman [bwh: Backported to 3.2: adjust context, indentation] Signed-off-by: Ben Hutchings

serial: mxs-auart: fix baud rate range

2017-07-18T17:38:39+00:00

commit df57cf6a879502cd6e5559c1f2d6db12128e074f upstream. Currently mxs-auart doesn't care correctly about the baud rate divisor. According to reference manual the baud rate divisor must be between 0x000000EC and 0x003FFFC0. So calculate the possible baud rate range and use it for uart_get_baud_rate(). Signed-off-by: Stefan Wahren Reviewed-by: Fabio Estevam Signed-off-by: Greg Kroah-Hartman Signed-off-by: Ben Hutchings

serial: 8250_pci: Add MKS Tenta SCOM-0800 and SCOM-0801 cards

2017-06-05T20:13:47+00:00

commit 1c9c858e2ff8ae8024a3d75d2ed080063af43754 upstream. The MKS Instruments SCOM-0800 and SCOM-0801 cards (originally by Tenta Technologies) are 3U CompactPCI serial cards with 4 and 8 serial ports, respectively. The first 4 ports are implemented by an OX16PCI954 chip, and the second 4 ports are implemented by an OX16C954 chip on a local bus, bridged by the second PCI function of the OX16PCI954. The ports are jumper-selectable as RS-232 and RS-422/485, and the UARTs use a non-standard oscillator frequency of 20 MHz (base_baud = 1250000). Signed-off-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman [bwh: Backported to 3.2: adjust filename] Signed-off-by: Ben Hutchings

tty: serial: msm: Fix module autoload

2017-06-05T20:13:41+00:00

commit abe81f3b8ed2996e1712d26d38ff6b73f582c616 upstream. If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/tty/serial/msm_serial.ko | grep alias $ After this patch: $ modinfo drivers/tty/serial/msm_serial.ko | grep alias alias: of:N*T*Cqcom,msm-uartdmC* alias: of:N*T*Cqcom,msm-uartdm alias: of:N*T*Cqcom,msm-uartC* alias: of:N*T*Cqcom,msm-uart Signed-off-by: Javier Martinez Canillas Acked-by: Bjorn Andersson Signed-off-by: Greg Kroah-Hartman Signed-off-by: Ben Hutchings

serial: samsung: Fix possible out of bounds access on non-DT platform

2016-11-20T01:01:23+00:00

commit 926b7b5122c96e1f18cd20e85a286c7ec8d18c97 upstream. On non-DeviceTree platforms, the index of serial device is a static variable incremented on each probe. It is incremented even if deferred probe happens when getting the clock in s3c24xx_serial_init_port(). This index is used for referencing elements of statically allocated s3c24xx_serial_ports array. In case of re-probe, the index will point outside of this array leading to memory corruption. Increment the index only on successful probe. Reported-by: Bartlomiej Zolnierkiewicz Fixes: b497549a035c ("[ARM] S3C24XX: Split serial driver into core and per-cpu drivers") Signed-off-by: Krzysztof Kozlowski Signed-off-by: Greg Kroah-Hartman [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings

serial: sh-sci: Remove cpufreq notifier to fix crash/deadlock

2016-04-30T22:05:26+00:00

commit ff1cab374ad98f4b9f408525ca9c08992b4ed784 upstream. The BSP team noticed that there is spin/mutex lock issue on sh-sci when CPUFREQ is used. The issue is that the notifier function may call mutex_lock() while the spinlock is held, which can lead to a BUG(). This may happen if CPUFREQ is changed while another CPU calls clk_get_rate(). Taking the spinlock was added to the notifier function in commit e552de2413edad1a ("sh-sci: add platform device private data"), to protect the list of serial ports against modification during traversal. At that time the Common Clock Framework didn't exist yet, and clk_get_rate() just returned clk->rate without taking a mutex. Note that since commit d535a2305facf9b4 ("serial: sh-sci: Require a device per port mapping."), there's no longer a list of serial ports to traverse, and taking the spinlock became superfluous. To fix the issue, just remove the cpufreq notifier: 1. The notifier doesn't work correctly: all it does is update the stored clock rate; it does not update the divider in the hardware. The divider will only be updated when calling sci_set_termios(). I believe this was broken back in 2004, when the old drivers/char/sh-sci.c driver (where the notifier did update the divider) was replaced by drivers/serial/sh-sci.c (where the notifier just updated port->uartclk). Cfr. full-history-linux commits 6f8deaef2e9675d9 ("[PATCH] sh: port sh-sci driver to the new API") and 3f73fe878dc9210a ("[PATCH] Remove old sh-sci driver"). 2. On modern SoCs, the sh-sci parent clock rate is no longer related to the CPU clock rate anyway, so using a cpufreq notifier is futile. Signed-off-by: Geert Uytterhoeven [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings

8250: use callbacks to access UART_DLL/UART_DLM

2016-04-30T22:05:14+00:00

commit 0b41ce991052022c030fd868e03877700220b090 upstream. Some UART HW has a single register combining UART_DLL/UART_DLM (this was probably forgotten in the change that introduced the callbacks, commit b32b19b8ffc05cbd3bf91c65e205f6a912ca15d9) Fixes: b32b19b8ffc0 ("[SERIAL] 8250: set divisor register correctly ...") Signed-off-by: Sebastian Frias Reviewed-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman [bwh: Backported to 3.2: - Adjust filename - We're using serial_{in,out}p for 8-bit I/O] Signed-off-by: Ben Hutchings

serial: 8250: bind to ALi Fast Infrared Controller (ALI5123)

2015-10-13T02:46:05+00:00

commit 1d7002777a8fe8188caaa98d4a8eb4ed298fcdae upstream. This way this device can be used with irtty-sir - at least on Toshiba Satellite A20-S103 it is not configured by default and needs PNP activation before it starts to respond on I/O ports. This device has actually its own driver (ali-ircc), but this driver seems to be non-functional for a very long time (see http://permalink.gmane.org/gmane.linux.irda.general/484 http://permalink.gmane.org/gmane.network.protocols.obex.openobex.user/943 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=535070 ). Signed-off-by: Maciej Szmigiero Signed-off-by: Greg Kroah-Hartman [bwh: Backported to 3.2: - Drop change to acpi_pnp.c, as there's no need to whitelist ACPI devices for the PNP bus - Adjust filename] Signed-off-by: Ben Hutchings

tty/serial: at91: RS485 mode: 0 is valid for delay_rts_after_send

2015-08-12T14:33:12+00:00

commit 8687634b7908c42eb700e0469e110e02833611d1 upstream. In RS485 mode, we may want to set the delay_rts_after_send value to 0. In the datasheet, the 0 value is said to "disable" the Transmitter Timeguard but this is exactly the expected behavior if we want no delay... Moreover, if the value was set to non-zero value by device-tree or earlier ioctl command, it was impossible to change it back to zero. Reported-by: Sami Pietikäinen Signed-off-by: Nicolas Ferre Signed-off-by: Greg Kroah-Hartman [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings