kernel/linux.git/drivers/tty/serial/sunhv.c, branch v6.7

serial: sunhv: Use port lock wrappers

2023-09-18T09:18:15+00:00

When a serial port is used for kernel console output, then all modifications to the UART registers which are done from other contexts, e.g. getty, termios, are interference points for the kernel console. So far this has been ignored and the printk output is based on the principle of hope. The rework of the console infrastructure which aims to support threaded and atomic consoles, requires to mark sections which modify the UART registers as unsafe. This allows the atomic write function to make informed decisions and eventually to restore operational state. It also allows to prevent the regular UART code from modifying UART registers while printk output is in progress. All modifications of UART registers are guarded by the UART port lock, which provides an obvious synchronization point with the console infrastructure. To avoid adding this functionality to all UART drivers, wrap the spin_[un]lock*() invocations for uart_port::lock into helper functions which just contain the spin_[un]lock*() invocations for now. In a subsequent step these helpers will gain the console synchronization mechanisms. Converted with coccinelle. No functional change. Signed-off-by: Thomas Gleixner Signed-off-by: John Ogness Link: https://lore.kernel.org/r/20230914183831.587273-66-john.ogness@linutronix.de Signed-off-by: Greg Kroah-Hartman

tty: Explicitly include correct DT includes

2023-07-25T18:19:05+00:00

The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring Acked-by: Uwe Kleine-König # for imx Link: https://lore.kernel.org/r/20230724205440.767071-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman

tty/serial: Make ->dcd_change()+uart_handle_dcd_change() status bool active

2023-01-19T15:04:35+00:00

Convert status parameter for ->dcd_change() and uart_handle_dcd_change() to bool which matches to how the parameter is used. Rename status to active to better describe what the parameter means. Acked-by: Rodolfo Giometti Reviewed-by: Jiri Slaby Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20230117090358.4796-9-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman

serial: sunhv: Use uart_xmit_advance()

2022-11-03T02:35:42+00:00

Take advantage of the new uart_xmit_advance() helper. Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20221019091151.6692-36-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman

serial: Make ->set_termios() old ktermios const

2022-08-30T12:22:35+00:00

There should be no reason to adjust old ktermios which is going to get discarded anyway. Reviewed-by: Andy Shevchenko Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20220816115739.10928-7-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman

Revert "serial: sunhv: Initialize lock for non-registered console"

2020-07-21T16:21:49+00:00

This reverts commit 0f87aa66e8c314f95c00eeff978c8a0b41e05d50. There has been a quick fix against uninitialised lock revealed by the commit f743061a85f5 ("serial: core: Initialise spin lock before use in uart_configure_port()"). Since we have now better fix in serial core, this may be safely reverted. Fixes: 0f87aa66e8c3 ("serial: sunhv: Initialize lock for non-registered console") Depends-on: f743061a85f5 ("serial: core: Initialise spin lock before use in uart_configure_port()") Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20200711135346.71171-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman

serial: sunhv: Initialize lock for non-registered console

2020-04-16T14:16:52+00:00

The commit a3cb39d258ef ("serial: core: Allow detach and attach serial device for console") changed a bit logic behind lock initialization since for most of the console driver it's supposed to have lock already initialized even if console is not enabled. However, it's not the case for Sparc HV console. Initialize lock explicitly in the ->probe(). Note, there is still an open question should or shouldn't not this driver register console properly. Fixes: a3cb39d258ef ("serial: core: Allow detach and attach serial device for console") Reported-by: Anatoly Pugachev Cc: David Miller Signed-off-by: Andy Shevchenko Tested-by: Anatoly Pugachev Link: https://lore.kernel.org/r/20200402172026.79478-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman

tty/serial: Migrate sunhv to use has_sysrq

2019-12-18T14:05:05+00:00

The SUPPORT_SYSRQ ifdeffery is not nice as: - May create misunderstanding about sizeof(struct uart_port) between different objects - Prevents moving functions from serial_core.h - Reduces readability (well, it's ifdeffery - it's hard to follow) In order to remove SUPPORT_SYSRQ, has_sysrq variable has been added. Initialise it in driver's probe and remove ifdeffery. Cc: "David S. Miller" Cc: sparclinux@vger.kernel.org Signed-off-by: Dmitry Safonov Link: https://lore.kernel.org/r/20191213000657.931618-46-dima@arista.com Signed-off-by: Greg Kroah-Hartman

sunhv: Fix device naming inconsistency between sunhv_console and sunhv_reg

2019-06-13T21:04:37+00:00

In d5a2aa24, the name in struct console sunhv_console was changed from "ttyS" to "ttyHV" while the name in struct uart_ops sunhv_pops remained unchanged. This results in the hypervisor console device to be listed as "ttyHV0" under /proc/consoles while the device node is still named "ttyS0": root@osaka:~# cat /proc/consoles ttyHV0 -W- (EC p ) 4:64 tty0 -WU (E ) 4:1 root@osaka:~# readlink /sys/dev/char/4:64 ../../devices/root/f02836f0/f0285690/tty/ttyS0 root@osaka:~# This means that any userland code which tries to determine the name of the device file of the hypervisor console device can not rely on the information provided by /proc/consoles. In particular, booting current versions of debian- installer inside a SPARC LDOM will fail with the installer unable to determine the console device. After renaming the device in struct uart_ops sunhv_pops to "ttyHV" as well, the inconsistency is fixed and it is possible again to determine the name of the device file of the hypervisor console device by reading the contents of /proc/console: root@osaka:~# cat /proc/consoles ttyHV0 -W- (EC p ) 4:64 tty0 -WU (E ) 4:1 root@osaka:~# readlink /sys/dev/char/4:64 ../../devices/root/f02836f0/f0285690/tty/ttyHV0 root@osaka:~# With this change, debian-installer works correctly when installing inside a SPARC LDOM. Signed-off-by: John Paul Adrian Glaubitz Signed-off-by: David S. Miller

tty: add SPDX identifiers to all remaining files in drivers/tty/

2017-11-08T12:08:12+00:00

It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/tty files files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Jiri Slaby Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Michael Ellerman Cc: Chris Metcalf Cc: Jiri Kosina Cc: David Sterba Cc: James Hogan Cc: Rob Herring Cc: Eric Anholt Cc: Stefan Wahren Cc: Florian Fainelli Cc: Ray Jui Cc: Scott Branden Cc: bcm-kernel-feedback-list@broadcom.com Cc: "James E.J. Bottomley" Cc: Helge Deller Cc: Joachim Eastwood Cc: Matthias Brugger Cc: Masahiro Yamada Cc: Tobias Klauser Cc: Russell King Cc: Vineet Gupta Cc: Richard Genoud Cc: Alexander Shiyan Cc: Baruch Siach Cc: "Maciej W. Rozycki" Cc: "Uwe Kleine-König" Cc: Pat Gefre Cc: "Guilherme G. Piccoli" Cc: Jason Wessel Cc: Vladimir Zapolskiy Cc: Sylvain Lemieux Cc: Carlo Caione Cc: Kevin Hilman Cc: Liviu Dudau Cc: Sudeep Holla Cc: Lorenzo Pieralisi Cc: Andy Gross Cc: David Brown Cc: "Andreas Färber" Cc: Kevin Cernekee Cc: Laxman Dewangan Cc: Thierry Reding Cc: Jonathan Hunter Cc: Barry Song Cc: Patrice Chotard Cc: Maxime Coquelin Cc: Alexandre Torgue Cc: "David S. Miller" Cc: Peter Korsgaard Cc: Timur Tabi Cc: Tony Prisk Cc: Michal Simek Cc: "Sören Brinkmann" Cc: Thomas Gleixner Cc: Kate Stewart Cc: Philippe Ombredanne Cc: Jiri Slaby Signed-off-by: Greg Kroah-Hartman