kernel/linux.git/drivers/tty/serial/st-asc.c, branch v6.7

serial: st-asc: Use port lock wrappers

2023-09-18T09:18:15+00:00

When a serial port is used for kernel console output, then all modifications to the UART registers which are done from other contexts, e.g. getty, termios, are interference points for the kernel console. So far this has been ignored and the printk output is based on the principle of hope. The rework of the console infrastructure which aims to support threaded and atomic consoles, requires to mark sections which modify the UART registers as unsafe. This allows the atomic write function to make informed decisions and eventually to restore operational state. It also allows to prevent the regular UART code from modifying UART registers while printk output is in progress. All modifications of UART registers are guarded by the UART port lock, which provides an obvious synchronization point with the console infrastructure. To avoid adding this functionality to all UART drivers, wrap the spin_[un]lock*() invocations for uart_port::lock into helper functions which just contain the spin_[un]lock*() invocations for now. In a subsequent step these helpers will gain the console synchronization mechanisms. Converted with coccinelle. No functional change. Signed-off-by: Thomas Gleixner Signed-off-by: John Ogness Link: https://lore.kernel.org/r/20230914183831.587273-64-john.ogness@linutronix.de Signed-off-by: Greg Kroah-Hartman

drivers:tty: fix return value check in asc_init_port

2023-07-30T11:53:19+00:00

in asc_init_port, clk_prepare_enable may fail, therefore, the return value of clk_prepare_enable should be checked. Signed-off-by: Yuanjun Gong Link: https://lore.kernel.org/r/20230717144733.24194-1-ruc_gongyuanjun@163.com Signed-off-by: Greg Kroah-Hartman

serial: st-asc: Use devm_platform_get_and_ioremap_resource()

2023-07-25T18:26:07+00:00

Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Yangtao Li Link: https://lore.kernel.org/r/20230712062853.11007-15-frank.li@vivo.com Signed-off-by: Greg Kroah-Hartman

serial: drivers: switch ch and flag to u8

2023-07-25T17:21:04+00:00

Now that the serial layer explicitly expects 'u8' for flags and characters, propagate this type to drivers' (RX) routines. Note that amba-pl011's, clps711x's and st-asc's 'ch' are left unchanged because 'ch' contains not only a character, but whole status. Signed-off-by: Jiri Slaby (SUSE) Cc: Tobias Klauser Cc: Russell King Cc: Vineet Gupta Cc: Richard Genoud Cc: Nicolas Ferre Cc: Alexandre Belloni Cc: Claudiu Beznea Cc: Alexander Shiyan Cc: Baruch Siach Cc: "Maciej W. Rozycki" Cc: Taichi Sugaya Cc: Takao Orito Cc: Shawn Guo Cc: Sascha Hauer Cc: Pengutronix Kernel Team Cc: Fabio Estevam Cc: NXP Linux Team Cc: Kevin Cernekee Cc: Krzysztof Kozlowski Cc: Alim Akhtar Cc: Laxman Dewangan Cc: Thierry Reding Cc: Jonathan Hunter Cc: Palmer Dabbelt Cc: Paul Walmsley Cc: Orson Zhai Cc: Baolin Wang Cc: Chunyan Zhang Cc: Patrice Chotard Cc: Maxime Coquelin Cc: Alexandre Torgue Cc: Hammer Hsieh Acked-by: Richard GENOUD Acked-by: Tobias Klauser Acked-by: Thierry Reding Acked-by: Maciej W. Rozycki Link: https://lore.kernel.org/r/20230712081811.29004-11-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman

serial: st-asc: fix typo in property name

2023-06-06T12:42:58+00:00

Changes the property name read in the driver according to the YAML. According to device-tree documentation, property names should not include underscores. Signed-off-by: Raphael Gallais-Pou Reviewed-by: Patrice Chotard Message-ID: <20230604083558.16661-1-rgallaispou@gmail.com> Signed-off-by: Greg Kroah-Hartman

serial: Make uart_remove_one_port() return void

2023-05-13T10:48:16+00:00

The return value is only ever used as a return value for remove callbacks of platform drivers. This return value is ignored by the driver core. (The only effect is an error message, but uart_remove_one_port() already emitted one in this case.) So the return value isn't used at all and uart_remove_one_port() can be changed to return void without any loss. Also this better matches the Linux device model as remove functions are not supposed to fail. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20230512173810.131447-3-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman

tty: serial: use uart_port_tx_limited()

2022-11-03T02:32:40+00:00

uart_port_tx_limited() is a new helper to send characters to the device. Use it in these drivers. mux.c also needs to define tx_done(). But I'm not sure if the driver really wants to wait for all the characters to dismiss from the HW fifo at this code point. Hence I marked this as FIXME. Cc: Russell King Cc: Florian Fainelli Cc: bcm-kernel-feedback-list@broadcom.com Cc: "Pali Rohár" Cc: Kevin Cernekee Cc: Palmer Dabbelt Cc: Paul Walmsley Cc: Orson Zhai Cc: Baolin Wang Cc: Chunyan Zhang Cc: Patrice Chotard Cc: linux-riscv@lists.infradead.org Reviewed-by: Ilpo Järvinen Signed-off-by: Jiri Slaby (SUSE) Link: https://lore.kernel.org/r/20221004104927.14361-4-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman

serial: Make ->set_termios() old ktermios const

2022-08-30T12:22:35+00:00

There should be no reason to adjust old ktermios which is going to get discarded anyway. Reviewed-by: Andy Shevchenko Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20220816115739.10928-7-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman

serial: st-asc: remove include of pm_runtime.h

2022-06-27T12:39:51+00:00

st-asc driver doesn't use helpers from pm_runtime.h thus remove its include. Reviewed-by: Patrice Chotard Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20220616140024.2081238-5-claudiu.beznea@microchip.com Signed-off-by: Greg Kroah-Hartman

serial: st-asc: Sanitize CSIZE and correct PARENB for CS7

2022-05-19T16:32:40+00:00

Only CS7 and CS8 seem supported but CSIZE is not sanitized from CS5 or CS6 to CS8. In addition, ASC_CTL_MODE_7BIT_PAR suggests that CS7 has to have parity, thus add PARENB. Incorrect CSIZE results in miscalculation of the frame bits in tty_get_char_size() or in its predecessor where the roughly the same code is directly within uart_update_timeout(). Fixes: c4b058560762 (serial:st-asc: Add ST ASC driver.) Cc: Srinivas Kandagatla Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20220519081808.3776-8-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman