kernel/linux.git/drivers/tty/serial/st-asc.c, branch linux-4.4.y

tty/serial: st-asc: drop the use of IRQF_NO_SUSPEND

2015-10-04T18:11:05+00:00

These drivers doesn't claim the serial device to be wakeup source. Even if it is, it needs to use enable_irq_wake or other related PM wakeup APIs to enable it. This patch removes yet another misuse of IRQF_NO_SUSPEND. Cc: Srinivas Kandagatla Cc: Maxime Coquelin Cc: Greg Kroah-Hartman Cc: linux-arm-kernel@lists.infradead.org Cc: kernel@stlinux.com Cc: linux-serial@vger.kernel.org Signed-off-by: Sudeep Holla Signed-off-by: Greg Kroah-Hartman

tty: constify of_device_id array

2015-03-26T21:49:10+00:00

of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick Acked-by: Peter Korsgaard Acked-by: Timur Tabi Acked-by: Patrice Chotard Signed-off-by: Greg Kroah-Hartman

tty: serial: drop owner assignment from platform_drivers

2014-10-20T14:21:45+00:00

A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang

serial: asc: Conditionally use readl_relaxed (COMPILE_TEST)

2014-09-29T01:49:48+00:00

Commit 08177ece596c ("serial: asc: Adopt readl_/writel_relaxed()) is regressing the m68k allmodconfig build. This is due to the unconditional use of readl_relaxed() which, although documented, does not currently exist for m68k. This is trivially fixable for st-asc because we can just update the asc_in() accessor to make this conditional. Reported-by: Guenter Roeck Signed-off-by: Daniel Thompson Cc: Srinivas Kandagatla Cc: Maxime Coquelin Cc: Patrice Chotard Cc: Jiri Slaby Signed-off-by: Greg Kroah-Hartman

serial: asc: Adopt readl_/writel_relaxed()

2014-09-10T13:59:41+00:00

The architectures supported by this driver, arm and sh, have expensive implementations of writel(), reliant on spin locks and explicit L2 cache management. These architectures provide a cheaper writel_relaxed() which is much better suited to peripherals that do not perform DMA. The situation with readl()/readl_relaxed()is similar although less acute. This driver does not use DMA and will be more power efficient and more robust (due to absence of spin locks during console I/O) if it uses the relaxed variants. The driver supports COMPILE_TEST and therefore falls back to writel() when writel_relaxed() does not exist. Signed-off-by: Daniel Thompson Acked-by: Srinivas Kandagatla Cc: Maxime Coquelin Cc: Patrice Chotard Cc: Jiri Slaby Cc: kernel@stlinux.com Cc: linux-serial@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

serial: st-asc: Fix overflow in baudrate calculation

2014-07-27T18:05:08+00:00

In the current calculation, if the required baud rate is above 262143, we get an overflow. This patch uses a 64bits variable to do the maths. Also, we remove the '+1' to avoid a divide by zero if the input clock rate is something unexpected. Indeed, if the input clock rate is zero, it is preferable to be notified, since the UART won't work anyway. Signed-off-by: Maxime Coquelin Signed-off-by: Greg Kroah-Hartman

serial: st-asc: Don't call BUG in asc_console_setup()

2014-07-27T18:05:08+00:00

In order to prevent an asc instance to be used as early console, BUG_ON is used on either mapbase or membase being NULL. Problem is that this condition is also true when we set console to be a ttyASx different to the first asc instance being probed. Instead of calling BUG_ON, it now returns -ENXIO when either mapbase or membase is NULL. Signed-off-by: Maxime Coquelin Signed-off-by: Greg Kroah-Hartman

serial: treewide: Remove empty implementations of enable_ms()

2014-07-10T00:29:38+00:00

Signed-off-by: Alexander Shiyan Signed-off-by: Greg Kroah-Hartman

serial: Fix IGNBRK handling

2014-06-19T20:04:52+00:00

If IGNBRK is set without either BRKINT or PARMRK set, some uart drivers send a 0x00 byte for BREAK without the TTYBREAK flag to the line discipline, when it should send either nothing or the TTYBREAK flag set. This happens because the read_status_mask masks out the BI condition, which uart_insert_char() then interprets as a normal 0x00 byte. SUS v3 is clear regarding the meaning of IGNBRK; Section 11.2.2, General Terminal Interface - Input Modes, states: "If IGNBRK is set, a break condition detected on input shall be ignored; that is, not put on the input queue and therefore not read by any process." Fix read_status_mask to include the BI bit if IGNBRK is set; the lsr status retains the BI bit if a BREAK is recv'd, which is subsequently ignored in uart_insert_char() when masked with the ignore_status_mask. Affected drivers: 8250 - all serial_txx9 mfd amba-pl010 amba-pl011 atmel_serial bfin_uart dz ip22zilog max310x mxs-auart netx-serial pnx8xxx_uart pxa sb1250-duart sccnxp serial_ks8695 sirfsoc_uart st-asc vr41xx_siu zs sunzilog fsl_lpuart sunsab ucc_uart bcm63xx_uart sunsu efm32-uart pmac_zilog mpsc msm_serial m32r_sio Unaffected drivers: omap-serial rp2 sa1100 imx icom Annotated for fixes: altera_uart mcf Drivers without break detection: 21285 xilinx-uartps altera_jtaguart apbuart arc-uart clps711x max3100 uartlite msm_serial_hs nwpserial lantiq vt8500_serial Unknown: samsung mpc52xx_uart bfin_sport_uart cpm_uart/core Fixes: Bugzilla #71651, '8250_core.c incorrectly handles IGNBRK flag' Reported-by: Ivan Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman

serial: st-asc: Fix data corruption during long console bursts

2014-05-28T19:24:31+00:00

On my test platform (B2020/STiH416) the serial port issues bad characters during the initial message avalanche as the console comes up. The problem also occurs when dense(ish) I/O is done using the polled I/O interface. The problem is fixed for me by using the FIFO half-empty bit rather than FIFO full bit. Note that using the half-empty bit causes the FIFO to be managed in a similar way to interrupt based I/O (i.e. where the hardware gets best test coverage). Running the FIFO half full will have no impact (good or bad) on console performance. The UART will still remain fully saturated and the busy-wait until the FIFO is empty in asc_console_write() will complete at the same time. Signed-off-by: Daniel Thompson Acked-by: Maxime Coquelin Acked-by: Srinivas Kandagatla Signed-off-by: Greg Kroah-Hartman