kernel/linux.git/drivers/tty/serial/sccnxp.c, branch v6.3.2

serial: sccnxp: Use devm_clk_get_enabled() helper

2023-01-19T14:51:28+00:00

The devm_clk_get_enabled() helper: - calls devm_clk_get() - calls clk_prepare_enable() and registers what is needed in order to call clk_disable_unprepare() when needed, as a managed resource. This simplifies the code. This also avoids some other warnings/issues. (see [1]) [1]: https://lore.kernel.org/all/20221118233101.never.215-kees@kernel.org/ Signed-off-by: Christophe JAILLET Link: https://lore.kernel.org/r/735a807c2df835aa436dcbc76b374f983f89a9af.1672419577.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman

serial: sccnxp: Use uart_xmit_advance()

2022-11-03T02:35:42+00:00

Take advantage of the new uart_xmit_advance() helper. Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20221019091151.6692-31-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman

serial: Make ->set_termios() old ktermios const

2022-08-30T12:22:35+00:00

There should be no reason to adjust old ktermios which is going to get discarded anyway. Reviewed-by: Andy Shevchenko Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20220816115739.10928-7-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman

serial: make uart_console_write->putchar()'s character an unsigned char

2022-03-03T14:06:31+00:00

Currently, uart_console_write->putchar's second parameter (the character) is of type int. It makes little sense, provided uart_console_write() accepts the input string as "const char *s" and passes its content -- the characters -- to putchar(). So switch the character's type to unsigned char. We don't use char as that is signed on some platforms. That would cause troubles for drivers which (implicitly) cast the char to u16 when writing to the device. Sign extension would happen in that case and the value written would be completely different to the provided char. DZ is an example of such a driver -- on MIPS, it uses u16 for dz_out in dz_console_putchar(). Note we do the char -> uchar conversion implicitly in uart_console_write(). Provided we do not change size of the data type, sign extension does not happen there, so the problem is void. This makes the types consistent and unified with the rest of the uart layer, which uses unsigned char in most places already. One exception is xmit_buf, but that is going to be converted later. Cc: Paul Cercueil Cc: Tobias Klauser Cc: Russell King Cc: Vineet Gupta Cc: Nicolas Ferre Cc: Alexandre Belloni Cc: Ludovic Desroches Cc: Florian Fainelli Cc: bcm-kernel-feedback-list@broadcom.com Cc: Alexander Shiyan Cc: Baruch Siach Cc: "Maciej W. Rozycki" Cc: Paul Walmsley Cc: Palmer Dabbelt Cc: Albert Ou Cc: Shawn Guo Cc: Sascha Hauer Cc: Pengutronix Kernel Team Cc: Fabio Estevam Cc: NXP Linux Team Cc: Karol Gugala Cc: Mateusz Holenko Cc: Vladimir Zapolskiy Cc: Neil Armstrong Cc: Kevin Hilman Cc: Jerome Brunet Cc: Martin Blumenstingl Cc: Taichi Sugaya Cc: Takao Orito Cc: Liviu Dudau Cc: Sudeep Holla Cc: Lorenzo Pieralisi Cc: "Andreas Färber" Cc: Manivannan Sadhasivam Cc: Michael Ellerman Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Andy Gross Cc: Bjorn Andersson Cc: Krzysztof Kozlowski Cc: Orson Zhai Cc: Baolin Wang Cc: Chunyan Zhang Cc: Patrice Chotard Cc: Maxime Coquelin Cc: Alexandre Torgue Cc: "David S. Miller" Cc: Peter Korsgaard Cc: Michal Simek Acked-by: Richard Genoud [atmel_serial] Acked-by: Uwe Kleine-König Acked-by: Paul Cercueil Acked-by: Neil Armstrong # meson_serial Signed-off-by: Jiri Slaby Link: https://lore.kernel.org/r/20220303080831.21783-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman

tty/serial: Migrate sccnxp to use has_sysrq

2019-12-18T14:05:00+00:00

The SUPPORT_SYSRQ ifdeffery is not nice as: - May create misunderstanding about sizeof(struct uart_port) between different objects - Prevents moving functions from serial_core.h - Reduces readability (well, it's ifdeffery - it's hard to follow) In order to remove SUPPORT_SYSRQ, has_sysrq variable has been added. Initialise it in driver's probe and remove ifdeffery. Signed-off-by: Dmitry Safonov Link: https://lore.kernel.org/r/20191213000657.931618-40-dima@arista.com Signed-off-by: Greg Kroah-Hartman

tty: Remove dev_err() usage after platform_get_irq()

2019-09-04T10:43:49+00:00

We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // While we're here, remove braces on if statements that only have one statement (manually). Cc: Greg Kroah-Hartman Cc: Jiri Slaby Cc: Greg Kroah-Hartman Signed-off-by: Stephen Boyd Link: https://lore.kernel.org/r/20190730181557.90391-45-swboyd@chromium.org Signed-off-by: Greg Kroah-Hartman

serial: sccnxp: Allow to use non-standard baud rates

2018-12-20T15:26:59+00:00

This patch adds support for the use of non-standard baud rates. For these purposes, we use the built-in timer/counter. Signed-off-by: Alexander Shiyan Signed-off-by: Greg Kroah-Hartman

serial: sccnxp: Adds a delay between sequential read/write cycles

2018-12-20T15:26:59+00:00

This patch adds a delay between sequential read/write cycles, to ensure the required minimum inactive time (tRWD). A time value from the datasheet has been added for each type of supported chips. The “inline” compiler attribute has been removed from the read/write functions, simply allow the compiler to control this. Signed-off-by: Alexander Shiyan Signed-off-by: Greg Kroah-Hartman

headers: separate linux/mod_devicetable.h from linux/platform_device.h

2018-07-07T15:52:26+00:00

At over 4000 #includes, is the 9th most #included header file in the Linux kernel. It does not need , so drop that header and explicitly add to source files that need it. 4146 #include After this patch, there are 225 files that use , for a reduction of around 3900 times that does not have to be read & parsed. 225 #include This patch was build-tested on 20 different arch-es. It also makes these drivers SubmitChecklist#1 compliant. Signed-off-by: Randy Dunlap Reported-by: kbuild test robot # drivers/media/platform/vimc/ Reported-by: kbuild test robot # drivers/pinctrl/pinctrl-u300.c Signed-off-by: Greg Kroah-Hartman

tty: serial: Remove redundant license text

2017-11-08T12:08:12+00:00

Now that the SPDX tag is in all tty files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Cc: Jiri Slaby Cc: Eric Anholt Cc: Stefan Wahren Cc: Florian Fainelli Cc: Ray Jui Cc: Scott Branden Cc: bcm-kernel-feedback-list@broadcom.com Cc: "James E.J. Bottomley" Cc: Helge Deller Cc: Joachim Eastwood Cc: Matthias Brugger Cc: Masahiro Yamada Cc: Tobias Klauser Cc: Russell King Cc: Vineet Gupta Cc: Richard Genoud Cc: Alexander Shiyan Cc: Baruch Siach Cc: Pat Gefre Cc: "Guilherme G. Piccoli" Cc: Jason Wessel Cc: Vladimir Zapolskiy Cc: Sylvain Lemieux Cc: Carlo Caione Cc: Kevin Hilman Cc: Liviu Dudau Cc: Sudeep Holla Cc: Lorenzo Pieralisi Cc: Andy Gross Cc: David Brown Cc: "Andreas Färber" Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Michael Ellerman Cc: Kevin Cernekee Cc: Laxman Dewangan Cc: Thierry Reding Cc: Jonathan Hunter Cc: Barry Song Cc: Patrice Chotard Cc: Maxime Coquelin Cc: Alexandre Torgue Cc: Chris Metcalf Cc: Peter Korsgaard Cc: Timur Tabi Cc: Tony Prisk Cc: Michal Simek Cc: "Sören Brinkmann" Signed-off-by: Greg Kroah-Hartman