kernel/linux.git/drivers/tty/serial/mcf.c, branch v5.15.7

serial: mcf: drop low-latency workaround

2021-04-22T10:09:25+00:00

Commit 5275ad70fed3 ("tty: serial: mcf: drop uart_port->lock before calling tty_flip_buffer_push()") claimed to address a locking issue but only provided a dubious lockdep splat from an unrelated driver, which in the end turned out to be due a broken local change carried by the author. Unfortunately these patches were merged before the issue had been analysed properly so the commit messages makes no sense whatsoever. The real issue was first seen on RT which at the time effectively always set the low_latency flag for all serial drivers by patching tty_flip_buffer_push(). This in turn revealed that many drivers did not handle the infamous low_latency behaviour which meant that data was pushed immediately to the line discipline instead of being deferred to a work queue. Since commit a9c3f68f3cd8 ("tty: Fix low_latency BUG"), tty_flip_buffer_push() always schedules a work item to push data to the line discipline and there's no need to keep any low_latency hacks around. Link: https://lore.kernel.org/linux-serial/cover.1376923198.git.viresh.kumar@linaro.org/ Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210421095509.3024-14-johan@kernel.org Signed-off-by: Greg Kroah-Hartman

serial: mcf: add sysrq capability

2020-10-05T11:32:30+00:00

After some unsuccessful attempts to use sysrq over console, figured out that port->has_sysrq should likely be enabled, as per other architectures, this when CONFIG_SERIAL_MCF_CONSOLE is also enabled. Tested some magic sysrq commands (h, p, t, b), they works now properly. Commands works inside 5 secs after BREAK is sent, as expected. Signed-off-by: Angelo Dureghello Link: https://lore.kernel.org/r/20201002140545.477481-1-angelo.dureghello@timesys.com Signed-off-by: Greg Kroah-Hartman

tty: serial: Remove redundant license text

2017-11-08T12:08:12+00:00

Now that the SPDX tag is in all tty files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Cc: Jiri Slaby Cc: Eric Anholt Cc: Stefan Wahren Cc: Florian Fainelli Cc: Ray Jui Cc: Scott Branden Cc: bcm-kernel-feedback-list@broadcom.com Cc: "James E.J. Bottomley" Cc: Helge Deller Cc: Joachim Eastwood Cc: Matthias Brugger Cc: Masahiro Yamada Cc: Tobias Klauser Cc: Russell King Cc: Vineet Gupta Cc: Richard Genoud Cc: Alexander Shiyan Cc: Baruch Siach Cc: Pat Gefre Cc: "Guilherme G. Piccoli" Cc: Jason Wessel Cc: Vladimir Zapolskiy Cc: Sylvain Lemieux Cc: Carlo Caione Cc: Kevin Hilman Cc: Liviu Dudau Cc: Sudeep Holla Cc: Lorenzo Pieralisi Cc: Andy Gross Cc: David Brown Cc: "Andreas Färber" Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Michael Ellerman Cc: Kevin Cernekee Cc: Laxman Dewangan Cc: Thierry Reding Cc: Jonathan Hunter Cc: Barry Song Cc: Patrice Chotard Cc: Maxime Coquelin Cc: Alexandre Torgue Cc: Chris Metcalf Cc: Peter Korsgaard Cc: Timur Tabi Cc: Tony Prisk Cc: Michal Simek Cc: "Sören Brinkmann" Signed-off-by: Greg Kroah-Hartman

tty: add SPDX identifiers to all remaining files in drivers/tty/

2017-11-08T12:08:12+00:00

It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/tty files files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Jiri Slaby Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Michael Ellerman Cc: Chris Metcalf Cc: Jiri Kosina Cc: David Sterba Cc: James Hogan Cc: Rob Herring Cc: Eric Anholt Cc: Stefan Wahren Cc: Florian Fainelli Cc: Ray Jui Cc: Scott Branden Cc: bcm-kernel-feedback-list@broadcom.com Cc: "James E.J. Bottomley" Cc: Helge Deller Cc: Joachim Eastwood Cc: Matthias Brugger Cc: Masahiro Yamada Cc: Tobias Klauser Cc: Russell King Cc: Vineet Gupta Cc: Richard Genoud Cc: Alexander Shiyan Cc: Baruch Siach Cc: "Maciej W. Rozycki" Cc: "Uwe Kleine-König" Cc: Pat Gefre Cc: "Guilherme G. Piccoli" Cc: Jason Wessel Cc: Vladimir Zapolskiy Cc: Sylvain Lemieux Cc: Carlo Caione Cc: Kevin Hilman Cc: Liviu Dudau Cc: Sudeep Holla Cc: Lorenzo Pieralisi Cc: Andy Gross Cc: David Brown Cc: "Andreas Färber" Cc: Kevin Cernekee Cc: Laxman Dewangan Cc: Thierry Reding Cc: Jonathan Hunter Cc: Barry Song Cc: Patrice Chotard Cc: Maxime Coquelin Cc: Alexandre Torgue Cc: "David S. Miller" Cc: Peter Korsgaard Cc: Timur Tabi Cc: Tony Prisk Cc: Michal Simek Cc: "Sören Brinkmann" Cc: Thomas Gleixner Cc: Kate Stewart Cc: Philippe Ombredanne Cc: Jiri Slaby Signed-off-by: Greg Kroah-Hartman

drivers/tty/serial/mcf.c: fix typo on SERIAL_MCF_CONSOLE

2015-05-06T20:26:59+00:00

Correct reference in C-comment after #endif. Signed-off-by: Valentin Rothberg Reviewed-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman

serial: mcf: fix no driver name in probe output

2015-01-09T22:06:57+00:00

The current output of the device probing looks like this: ColdFire internal UART serial driver (NULL device *): ttyS0 at MMIO 0xfc060000 (irq = 90, base_baud = 5208333) is a ColdFire UART console [ttyS0] enabled (NULL device *): ttyS1 at MMIO 0xfc064000 (irq = 91, base_baud = 5208333) is a ColdFire UART (NULL device *): ttyS2 at MMIO 0xfc068000 (irq = 92, base_baud = 5208333) is a ColdFire UART Fix the port device linkage at probing time so that the device name is printed out properly, and not "(NULL device *)". Signed-off-by: Greg Ungerer Signed-off-by: Greg Kroah-Hartman

serial: mcf: fix compile warnings

2015-01-09T22:06:57+00:00

Trivially fix the following compile time warnings: CC drivers/tty/serial/mcf.o drivers/tty/serial/mcf.c: In function ‘mcf_set_termios’: drivers/tty/serial/mcf.c:201:19: warning: unused variable ‘pp’ drivers/tty/serial/mcf.c: In function ‘mcf_config_rs485’: drivers/tty/serial/mcf.c:444:19: warning: unused variable ‘pp’ Signed-off-by: Greg Ungerer Signed-off-by: Greg Kroah-Hartman

serial: mcf: change email address to gerg@uclinux.org

2015-01-09T22:06:57+00:00

Change my email contact address from the obsolete gerg@snapgear.com to gerg@uclinux.org. Signed-off-by: Greg Ungerer Signed-off-by: Greg Kroah-Hartman

Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2014-12-15T00:10:09+00:00

Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev__once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...

tty/serial_core: Introduce lock mechanism for RS485

2014-11-06T23:00:44+00:00

Introduce an homogeneous lock system between setting and using the rs485 data of the uart_port. This patch should not be split into multiple ones in order to avoid leaving the tree in an unstable state. Acked-by: Nicolas Ferre Reviewed-by: Alan Cox Suggested-by: Alan Cox Cc: Nicolas Ferre Cc: Jiri Slaby Cc: One Thousand Gnomes Signed-off-by: Ricardo Ribalda Delgado Signed-off-by: Greg Kroah-Hartman