kernel/linux.git/drivers/tty/serial/jsm, branch v6.18.22

treewide: Drop pci_save_state() after pci_restore_state()

2026-02-11T12:41:45+00:00

commit 383d89699c5028de510a6667f674ed38585f77fc upstream. In 2009, commit c82f63e411f1 ("PCI: check saved state before restore") changed the behavior of pci_restore_state() such that it became necessary to call pci_save_state() afterwards, lest recovery from subsequent PCI errors fails. The commit has just been reverted and so all the pci_save_state() after pci_restore_state() calls that have accumulated in the tree are now superfluous. Drop them. Two drivers chose a different approach to achieve the same result: drivers/scsi/ipr.c and drivers/net/ethernet/intel/e1000e/netdev.c set the pci_dev's "state_saved" flag to true before calling pci_restore_state(). Drop this as well. Signed-off-by: Lukas Wunner Signed-off-by: Bjorn Helgaas Acked-by: Dave Jiang Acked-by: Giovanni Cabiddu # qat Link: https://patch.msgid.link/c2b28cc4defa1b743cf1dedee23c455be98b397a.1760274044.git.lukas@wunner.de Cc: Mario Limonciello Signed-off-by: Greg Kroah-Hartman

serial: jsm: fix NPE during jsm_uart_port_init

2025-05-21T11:35:58+00:00

No device was set which caused serial_base_ctrl_add to crash. BUG: kernel NULL pointer dereference, address: 0000000000000050 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 16 UID: 0 PID: 368 Comm: (udev-worker) Not tainted 6.12.25-amd64 #1 Debian 6.12.25-1 RIP: 0010:serial_base_ctrl_add+0x96/0x120 Call Trace: serial_core_register_port+0x1a0/0x580 ? __setup_irq+0x39c/0x660 ? __kmalloc_cache_noprof+0x111/0x310 jsm_uart_port_init+0xe8/0x180 [jsm] jsm_probe_one+0x1f4/0x410 [jsm] local_pci_probe+0x42/0x90 pci_device_probe+0x22f/0x270 really_probe+0xdb/0x340 ? pm_runtime_barrier+0x54/0x90 ? __pfx___driver_attach+0x10/0x10 __driver_probe_device+0x78/0x110 driver_probe_device+0x1f/0xa0 __driver_attach+0xba/0x1c0 bus_for_each_dev+0x8c/0xe0 bus_add_driver+0x112/0x1f0 driver_register+0x72/0xd0 jsm_init_module+0x36/0xff0 [jsm] ? __pfx_jsm_init_module+0x10/0x10 [jsm] do_one_initcall+0x58/0x310 do_init_module+0x60/0x230 Tested with Digi Neo PCIe 8 port card. Fixes: 84a9582fd203 ("serial: core: Start managing serial controllers to enable runtime PM") Cc: stable Signed-off-by: Dustin Lundquist Link: https://lore.kernel.org/r/3f31d4f75863614655c4673027a208be78d022ec.camel@null-ptr.net Signed-off-by: Greg Kroah-Hartman

tty: serial: switch from circ_buf to kfifo

2024-04-09T13:28:03+00:00

Switch from struct circ_buf to proper kfifo. kfifo provides much better API, esp. when wrap-around of the buffer needs to be taken into account. Look at pl011_dma_tx_refill() or cpm_uart_tx_pump() changes for example. Kfifo API can also fill in scatter-gather DMA structures, so it easier for that use case too. Look at lpuart_dma_tx() for example. Note that not all drivers can be converted to that (like atmel_serial), they handle DMA specially. Note that usb-serial uses kfifo for TX for ages. omap needed a bit more care as it needs to put a char into FIFO to start the DMA transfer when OMAP_DMA_TX_KICK is set. In that case, we have to do kfifo_dma_out_prepare twice: once to find out the tx_size (to find out if it is worths to do DMA at all -- size >= 4), the second time for the actual transfer. All traces of circ_buf are removed from serial_core.h (and its struct uart_state). Signed-off-by: Jiri Slaby (SUSE) Cc: Al Cooper Cc: Matthias Brugger Cc: AngeloGioacchino Del Regno Cc: Kumaravel Thiagarajan Cc: Tharun Kumar P Cc: Russell King Cc: Vineet Gupta Cc: Richard Genoud Cc: Nicolas Ferre Cc: Alexandre Belloni Cc: Claudiu Beznea Cc: Alexander Shiyan Cc: Baruch Siach Cc: Maciej W. Rozycki Cc: Shawn Guo Cc: Sascha Hauer Cc: Fabio Estevam Cc: Neil Armstrong Cc: Kevin Hilman Cc: Jerome Brunet Cc: Martin Blumenstingl Cc: Taichi Sugaya Cc: Takao Orito Cc: Bjorn Andersson Cc: Konrad Dybcio Cc: Pali Rohár Cc: Michael Ellerman Cc: Nicholas Piggin Cc: Christophe Leroy Cc: Aneesh Kumar K.V Cc: Naveen N. Rao Cc: Manivannan Sadhasivam Cc: Krzysztof Kozlowski Cc: Alim Akhtar Cc: Laxman Dewangan Cc: Thierry Reding Cc: Jonathan Hunter Cc: Orson Zhai Cc: Baolin Wang Cc: Chunyan Zhang Cc: Patrice Chotard Cc: Maxime Coquelin Cc: Alexandre Torgue Cc: David S. Miller Cc: Hammer Hsieh Cc: Peter Korsgaard Cc: Timur Tabi Cc: Michal Simek Cc: Sumit Semwal Cc: Christian König Link: https://lore.kernel.org/r/20240405060826.2521-13-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman

tty: jsm: Remove redundant assignment to variable linestatus

2024-02-18T17:59:58+00:00

The variable linestate being assigned a value that is never read, the following continue statement jumps to the end of the while-loop and then it is re-assigned a new value. The assignment is redundant and can be removed. Cleans up clang scan build warning: drivers/tty/serial/jsm/jsm_cls.c:398:4: warning: Value stored to 'linestatus' is never read [deadcode.DeadStores] Signed-off-by: Colin Ian King Link: https://lore.kernel.org/r/20240216121732.2106445-1-colin.i.king@gmail.com Signed-off-by: Greg Kroah-Hartman

tty: jsm: remove unused struct jsm_board members

2023-11-23T19:16:03+00:00

clang-struct [1] found jsm_board::type and ::jsm_board_entry unused. ::jsm_board_entry is unused since 614a7d6a76b7 ("fix up newly added jsm driver") ::type was never used as far as I can tell. Even when the driver was introduced in the pre-git era. Remove them both. [1] https://github.com/jirislaby/clang-struct Signed-off-by: "Jiri Slaby (SUSE)" Reviewed-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20231121103626.17772-5-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman

tty: jsm: remove unused members from struct board_ops

2023-11-23T19:16:03+00:00

clang-struct [1] found board_ops::get_uart_bytes_left() and ::send_immediate_char() unused. Both are only set but never called. And it has been like that since the git history, so drop both the members along with the cls+neo implementations. [1] https://github.com/jirislaby/clang-struct Signed-off-by: "Jiri Slaby (SUSE)" Reviewed-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20231121103626.17772-4-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman

serial: jsm: Use port lock wrappers

2023-09-18T09:18:11+00:00

When a serial port is used for kernel console output, then all modifications to the UART registers which are done from other contexts, e.g. getty, termios, are interference points for the kernel console. So far this has been ignored and the printk output is based on the principle of hope. The rework of the console infrastructure which aims to support threaded and atomic consoles, requires to mark sections which modify the UART registers as unsafe. This allows the atomic write function to make informed decisions and eventually to restore operational state. It also allows to prevent the regular UART code from modifying UART registers while printk output is in progress. All modifications of UART registers are guarded by the UART port lock, which provides an obvious synchronization point with the console infrastructure. To avoid adding this functionality to all UART drivers, wrap the spin_[un]lock*() invocations for uart_port::lock into helper functions which just contain the spin_[un]lock*() invocations for now. In a subsequent step these helpers will gain the console synchronization mechanisms. Converted with coccinelle. No functional change. Signed-off-by: Thomas Gleixner Signed-off-by: John Ogness Link: https://lore.kernel.org/r/20230914183831.587273-32-john.ogness@linutronix.de Signed-off-by: Greg Kroah-Hartman

drivers: serial: jsm: fix some leaks in probe

2022-09-22T14:11:43+00:00

This error path needs to unwind instead of just returning directly. Fixes: 03a8482c17dd ("drivers: serial: jsm: Enable support for Digi Classic adapters") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/YyxFh1+lOeZ9WfKO@kili Signed-off-by: Greg Kroah-Hartman

serial: Make ->set_termios() old ktermios const

2022-08-30T12:22:35+00:00

There should be no reason to adjust old ktermios which is going to get discarded anyway. Reviewed-by: Andy Shevchenko Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20220816115739.10928-7-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman

serial: jsm: Use B0 instead of 0

2022-05-19T16:26:17+00:00

Use B0 to check zero baudrate rather than literal 0. While at it, remove extra parenthesis around CBAUD. Reviewed-by: Johan Hovold Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20220513082906.11096-6-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman