kernel/linux.git/drivers/tty/serial/icom.c, branch v4.9.331

tty: Fix a possible resource leak in icom_probe

2022-06-14T14:52:39+00:00

[ Upstream commit ee157a79e7c82b01ae4c25de0ac75899801f322c ] When pci_read_config_dword failed, call pci_release_regions() and pci_disable_device() to recycle the resource previously allocated. Reviewed-by: Jiri Slaby Signed-off-by: Huang Guobin Link: https://lore.kernel.org/r/20220331091005.3290753-1-huangguobin4@huawei.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

tty: Remove unused SERIAL_DO_RESTART define

2015-12-14T03:59:48+00:00

SERIAL_DO_RESTART is not used by these 3 drivers; remove. Signed-off-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman

tty: icom.c: move assignment out of if () block

2015-05-10T17:04:17+00:00

We should not be doing assignments within an if () block so fix up the code to not do this. change was created using Coccinelle. CC: Jiri Slaby Signed-off-by: Greg Kroah-Hartman

serial: icom: fix error return code

2014-11-26T01:06:39+00:00

Return a negative error code on failure. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ identifier ret; expression e1,e2; @@ ( if (\(ret < 0\|ret != 0\)) { ... return ret; } | ret = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // Signed-off-by: Julia Lawall Signed-off-by: Greg Kroah-Hartman

serial: treewide: Remove empty implementations of enable_ms()

2014-07-10T00:29:38+00:00

Signed-off-by: Alexander Shiyan Signed-off-by: Greg Kroah-Hartman

serial: icom: dereference after free in load_code()

2013-12-09T01:16:05+00:00

We use "fw" in the next line after we release it. I've shifted the call to release_firmware() down a couple lines to fix this. Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman

serial: icom: move array overflow checks earlier

2013-08-27T23:24:33+00:00

This code does an annoying thing where it writes to the array and then checks later for array overflows. I don't know if it's actually possible to overflow but let's check before using the array index. Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman

tty: serial: icom: drop uart_port->lock before calling tty_flip_buffer_push()

2013-08-27T23:17:34+00:00

The current driver triggers a lockdep warning for if tty_flip_buffer_push() is called with uart_port->lock locked. This never shows up on UP kernels and comes up only on SMP kernels. Crash looks like this (produced with samsung.c driver): ----- [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_unlock+0xc4/0xd8) [] (do_raw_spin_unlock+0xc4/0xd8) from [] (_raw_spin_unlock_irqrestore+0xc/0) [] (_raw_spin_unlock_irqrestore+0xc/0x38) from [] (s3c24xx_serial_rx_chars+0) [] (s3c24xx_serial_rx_chars+0x12c/0x260) from [] (s3c64xx_serial_handle_irq+) [] (s3c64xx_serial_handle_irq+0x48/0x60) from [] (handle_irq_event_percpu+0x) [] (handle_irq_event_percpu+0x50/0x194) from [] (handle_irq_event+0x3c/0x5c) [] (handle_irq_event+0x3c/0x5c) from [] (handle_fasteoi_irq+0x80/0x13c) [] (handle_fasteoi_irq+0x80/0x13c) from [] (generic_handle_irq+0x20/0x30) [] (generic_handle_irq+0x20/0x30) from [] (handle_IRQ+0x38/0x94) [] (handle_IRQ+0x38/0x94) from [] (gic_handle_irq+0x34/0x68) [] (gic_handle_irq+0x34/0x68) from [] (__irq_svc+0x40/0x70) Exception stack(0xc04cdf70 to 0xc04cdfb8) df60: 00000000 00000000 0000166e 00000000 df80: c04cc000 c050278f c050278f 00000001 c04d444c 410fc0f4 c03649b0 00000000 dfa0: 00000001 c04cdfb8 c000f758 c000f75c 60070013 ffffffff [] (__irq_svc+0x40/0x70) from [] (arch_cpu_idle+0x28/0x30) [] (arch_cpu_idle+0x28/0x30) from [] (cpu_startup_entry+0x5c/0x148) [] (cpu_startup_entry+0x5c/0x148) from [] (start_kernel+0x334/0x38c) BUG: spinlock lockup suspected on CPU#0, kworker/0:1/360 lock: s3c24xx_serial_ports+0x1d8/0x370, .magic: dead4ead, .owner: /-1, .owner_cpu: -1 CPU: 0 PID: 360 Comm: kworker/0:1 Not tainted 3.11.0-rc6-next-20130819-00003-g75485f1 #2 Workqueue: events flush_to_ldisc [] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x6c/0xac) [] (dump_stack+0x6c/0xac) from [] (do_raw_spin_lock+0x100/0x17c) [] (do_raw_spin_lock+0x100/0x17c) from [] (_raw_spin_lock_irqsave+0x20/0x28) [] (_raw_spin_lock_irqsave+0x20/0x28) from [] (uart_start+0x18/0x34) [] (uart_start+0x18/0x34) from [] (__receive_buf+0x4b4/0x738) [] (__receive_buf+0x4b4/0x738) from [] (n_tty_receive_buf2+0x30/0x98) [] (n_tty_receive_buf2+0x30/0x98) from [] (flush_to_ldisc+0xec/0x138) [] (flush_to_ldisc+0xec/0x138) from [] (process_one_work+0xfc/0x348) [] (process_one_work+0xfc/0x348) from [] (worker_thread+0x138/0x37c) [] (worker_thread+0x138/0x37c) from [] (kthread+0xa4/0xb0) [] (kthread+0xa4/0xb0) from [] (ret_from_fork+0x14/0x3c) ----- Release the port lock before calling tty_flip_buffer_push() and reacquire it after the call. Similar stuff was already done for few other drivers in the past, like: commit 2389b272168ceec056ca1d8a870a97fa9c26e11a Author: Thomas Gleixner Date: Tue May 29 21:53:50 2007 +0100 [ARM] 4417/1: Serial: Fix AMBA drivers locking Signed-off-by: Viresh Kumar Signed-off-by: Greg Kroah-Hartman

serial: icom: fix casting warning

2013-08-12T18:35:31+00:00

icom_port->uart_port.membase is (unsigned char __iomem *); thus, casting (unsigned char __iomem *) is necessary to fix the following warning. Also, local symbols are staticized. drivers/tty/serial/icom.c:108:26: warning: symbol 'start_proc' was not declared. Should it be static? drivers/tty/serial/icom.c:116:26: warning: symbol 'stop_proc' was not declared. Should it be static? drivers/tty/serial/icom.c:123:25: warning: symbol 'int_mask_tbl' was not declared. Should it be static? drivers/tty/serial/icom.c:1569:54: warning: incorrect type in assignment (different address spaces) drivers/tty/serial/icom.c:1569:54: expected unsigned char [noderef] *membase drivers/tty/serial/icom.c:1569:54: got char * drivers/tty/serial/icom.c:1090:9: warning: cast truncates bits from constant value (ffffff7f becomes 7f) Signed-off-by: Jingoo Han Signed-off-by: Greg Kroah-Hartman

driver: tty: serial: remove cast for kzalloc return value

2013-03-19T00:09:37+00:00

remove cast for kzalloc return value. Signed-off-by: Zhang Yanfei Cc: Jiri Slaby Cc: Andrew Morton Signed-off-by: Greg Kroah-Hartman