kernel/linux.git/drivers/tty/serial/altera_uart.c, branch v6.6.132

serial: drivers: switch ch and flag to u8

2023-07-25T17:21:04+00:00

Now that the serial layer explicitly expects 'u8' for flags and characters, propagate this type to drivers' (RX) routines. Note that amba-pl011's, clps711x's and st-asc's 'ch' are left unchanged because 'ch' contains not only a character, but whole status. Signed-off-by: Jiri Slaby (SUSE) Cc: Tobias Klauser Cc: Russell King Cc: Vineet Gupta Cc: Richard Genoud Cc: Nicolas Ferre Cc: Alexandre Belloni Cc: Claudiu Beznea Cc: Alexander Shiyan Cc: Baruch Siach Cc: "Maciej W. Rozycki" Cc: Taichi Sugaya Cc: Takao Orito Cc: Shawn Guo Cc: Sascha Hauer Cc: Pengutronix Kernel Team Cc: Fabio Estevam Cc: NXP Linux Team Cc: Kevin Cernekee Cc: Krzysztof Kozlowski Cc: Alim Akhtar Cc: Laxman Dewangan Cc: Thierry Reding Cc: Jonathan Hunter Cc: Palmer Dabbelt Cc: Paul Walmsley Cc: Orson Zhai Cc: Baolin Wang Cc: Chunyan Zhang Cc: Patrice Chotard Cc: Maxime Coquelin Cc: Alexandre Torgue Cc: Hammer Hsieh Acked-by: Richard GENOUD Acked-by: Tobias Klauser Acked-by: Thierry Reding Acked-by: Maciej W. Rozycki Link: https://lore.kernel.org/r/20230712081811.29004-11-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman

serial: altera_uart: fix locking in polling mode

2022-11-23T08:38:42+00:00

Since altera_uart_interrupt() may also be called from a poll timer in "serving_softirq" context, use spin_[lock_irqsave|unlock_irqrestore] variants, which are appropriate for both softirq and hardware interrupt contexts. Fixes: 2f8b9c15cd88 ("altera_uart: Add support for polling mode (IRQ-less)") Signed-off-by: Gabriel Somlo Link: https://lore.kernel.org/r/20221122200426.888349-1-gsomlo@gmail.com Signed-off-by: Greg Kroah-Hartman

tty: serial: use uart_port_tx() helper

2022-11-03T02:32:40+00:00

uart_port_tx() is a new helper to send characters to the device. Use it in these drivers. Cc: Tobias Klauser Cc: Richard Genoud Cc: Nicolas Ferre Cc: Alexandre Belloni Cc: Claudiu Beznea Cc: Vladimir Zapolskiy Cc: Liviu Dudau Cc: Sudeep Holla Cc: Lorenzo Pieralisi Cc: Shawn Guo Cc: Sascha Hauer Cc: Pengutronix Kernel Team Cc: Fabio Estevam Cc: NXP Linux Team Cc: "Andreas Färber" Cc: Manivannan Sadhasivam Reviewed-by: Ilpo Järvinen Signed-off-by: Jiri Slaby (SUSE) Link: https://lore.kernel.org/r/20221004104927.14361-3-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman

tty: serial: altera_uart_{r,t}x_chars() need only uart_port

2022-09-22T14:14:08+00:00

Both altera_uart_{r,t}x_chars() need only uart_port, not altera_uart. So pass the former from altera_uart_interrupt() directly. Apart it maybe saves a dereference, this makes the transition of altera_uart_tx_chars() easier to follow in the next patch. Cc: Tobias Klauser Reviewed-by: Ilpo Järvinen Acked-by: Tobias Klauser Signed-off-by: Jiri Slaby Link: https://lore.kernel.org/r/20220920052049.20507-4-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman

tty: serial: clean up stop-tx part in altera_uart_tx_chars()

2022-09-22T14:14:07+00:00

The "stop TX" path in altera_uart_tx_chars() is open-coded, so: * use uart_circ_empty() to check if the buffer is empty, and * when true, call altera_uart_stop_tx(). Cc: Tobias Klauser Reviewed-by: Ilpo Järvinen Acked-by: Tobias Klauser Signed-off-by: Jiri Slaby Link: https://lore.kernel.org/r/20220920052049.20507-3-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman

serial: Make ->set_termios() old ktermios const

2022-08-30T12:22:35+00:00

There should be no reason to adjust old ktermios which is going to get discarded anyway. Reviewed-by: Andy Shevchenko Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20220816115739.10928-7-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman

serial: make uart_console_write->putchar()'s character an unsigned char

2022-03-03T14:06:31+00:00

Currently, uart_console_write->putchar's second parameter (the character) is of type int. It makes little sense, provided uart_console_write() accepts the input string as "const char *s" and passes its content -- the characters -- to putchar(). So switch the character's type to unsigned char. We don't use char as that is signed on some platforms. That would cause troubles for drivers which (implicitly) cast the char to u16 when writing to the device. Sign extension would happen in that case and the value written would be completely different to the provided char. DZ is an example of such a driver -- on MIPS, it uses u16 for dz_out in dz_console_putchar(). Note we do the char -> uchar conversion implicitly in uart_console_write(). Provided we do not change size of the data type, sign extension does not happen there, so the problem is void. This makes the types consistent and unified with the rest of the uart layer, which uses unsigned char in most places already. One exception is xmit_buf, but that is going to be converted later. Cc: Paul Cercueil Cc: Tobias Klauser Cc: Russell King Cc: Vineet Gupta Cc: Nicolas Ferre Cc: Alexandre Belloni Cc: Ludovic Desroches Cc: Florian Fainelli Cc: bcm-kernel-feedback-list@broadcom.com Cc: Alexander Shiyan Cc: Baruch Siach Cc: "Maciej W. Rozycki" Cc: Paul Walmsley Cc: Palmer Dabbelt Cc: Albert Ou Cc: Shawn Guo Cc: Sascha Hauer Cc: Pengutronix Kernel Team Cc: Fabio Estevam Cc: NXP Linux Team Cc: Karol Gugala Cc: Mateusz Holenko Cc: Vladimir Zapolskiy Cc: Neil Armstrong Cc: Kevin Hilman Cc: Jerome Brunet Cc: Martin Blumenstingl Cc: Taichi Sugaya Cc: Takao Orito Cc: Liviu Dudau Cc: Sudeep Holla Cc: Lorenzo Pieralisi Cc: "Andreas Färber" Cc: Manivannan Sadhasivam Cc: Michael Ellerman Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Andy Gross Cc: Bjorn Andersson Cc: Krzysztof Kozlowski Cc: Orson Zhai Cc: Baolin Wang Cc: Chunyan Zhang Cc: Patrice Chotard Cc: Maxime Coquelin Cc: Alexandre Torgue Cc: "David S. Miller" Cc: Peter Korsgaard Cc: Michal Simek Acked-by: Richard Genoud [atmel_serial] Acked-by: Uwe Kleine-König Acked-by: Paul Cercueil Acked-by: Neil Armstrong # meson_serial Signed-off-by: Jiri Slaby Link: https://lore.kernel.org/r/20220303080831.21783-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman

serial: altera: Use platform_get_irq_optional() to get the interrupt

2021-12-30T12:26:48+00:00

platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq_optional(). Signed-off-by: Lad Prabhakar Link: https://lore.kernel.org/r/20211224142917.6966-2-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Greg Kroah-Hartman

serial: altera_uart: drop low-latency workaround

2021-04-22T10:09:24+00:00

Commit dd085ed8ef6c ("tty: serial: altera: drop uart_port->lock before calling tty_flip_buffer_push()") claimed to address a locking issue but only provided a dubious lockdep splat from an unrelated driver, which in the end turned out to be due a broken local change carried by the author. Unfortunately these patches were merged before the issue had been analysed properly so the commit messages makes no sense whatsoever. The real issue was first seen on RT which at the time effectively always set the low_latency flag for all serial drivers by patching tty_flip_buffer_push(). This in turn revealed that many drivers did not handle the infamous low_latency behaviour which meant that data was pushed immediately to the line discipline instead of being deferred to a work queue. Since commit a9c3f68f3cd8 ("tty: Fix low_latency BUG"), tty_flip_buffer_push() always schedules a work item to push data to the line discipline and there's no need to keep any low_latency hacks around. Link: https://lore.kernel.org/linux-serial/cover.1376923198.git.viresh.kumar@linaro.org/ Cc: Tobias Klauser Acked-by: Tobias Klauser Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210421095509.3024-4-johan@kernel.org Signed-off-by: Greg Kroah-Hartman

serial: altera: set RRDY flag also without irq

2018-02-28T12:30:09+00:00

The UART can be operated without an irq. In this case a timer is setup that regularily calls altera_uart_interrupt(). The receiving part depends on pp->imr having the bit ALTERA_UART_STATUS_RRDY_MSK set, otherwise altera_uart_rx_chars() is never called. So ensure that the bit gets set (disguised as ALTERA_UART_CONTROL_RRDY_MSK) by not returning early from altera_uart_startup() if port->irq is 0. This doesn't affect the hardware as the ALTERA_UART_CONTROL_RRDY_MSK bit isn't actually written to the control register. Signed-off-by: Uwe Kleine-König Acked-by: Tobias Klauser Signed-off-by: Greg Kroah-Hartman