kernel/linux.git/drivers/tty/serial/8250, branch v4.19.39

serial: 8250_pxa: honor the port number from devicetree

2019-04-05T20:33:01+00:00

[ Upstream commit fe9ed6d2483fda55465f32924fb15bce0fac3fac ] Like the other OF-enabled drivers, use the port number from the firmware if the devicetree specifies an alias: aliases { ... serial2 = &uart2; /* Should be ttyS2 */ } This is how the deprecated pxa.c driver behaved, switching to 8250_pxa messes up the numbering. Signed-off-by: Lubomir Rintel Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

serial: 8250_pci: Have ACCES cards that use the four port Pericom PI7C9X7954 chip use the pci_pericom_setup()

2019-03-23T19:10:06+00:00

commit 78d3820b9bd39028727c6aab7297b63c093db343 upstream. The four port Pericom chips have the fourth port at the wrong address. Make use of quirk to fix it. Fixes: c8d192428f52 ("serial: 8250: added acces i/o products quad and octal serial cards") Cc: stable Signed-off-by: Jay Dolan Signed-off-by: Greg Kroah-Hartman

serial: 8250_pci: Fix number of ports for ACCES serial cards

2019-03-23T19:10:06+00:00

commit b896b03bc7fce43a07012cc6bf5e2ab2fddf3364 upstream. Have the correct number of ports created for ACCES serial cards. Two port cards show up as four ports, and four port cards show up as eight. Fixes: c8d192428f52 ("serial: 8250: added acces i/o products quad and octal serial cards") Signed-off-by: Jay Dolan Cc: stable Signed-off-by: Greg Kroah-Hartman

serial: 8250_of: assume reg-shift of 2 for mrvl,mmp-uart

2019-03-23T19:10:06+00:00

commit f4817843e39ce78aace0195a57d4e8500a65a898 upstream. There are two other drivers that bind to mrvl,mmp-uart and both of them assume register shift of 2 bits. There are device trees that lack the property and rely on that assumption. If this driver wins the race to bind to those devices, it should behave the same as the older deprecated driver. Signed-off-by: Lubomir Rintel Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

serial: 8250_pci: Make PCI class test non fatal

2019-02-12T18:47:26+00:00

commit 824d17c57b0abbcb9128fb3f7327fae14761914b upstream. As has been reported the National Instruments serial cards have broken PCI class. The commit 7d8905d06405 ("serial: 8250_pci: Enable device after we check black list") made the PCI class check mandatory for the case when device is listed in a quirk list. Make PCI class test non fatal to allow broken card be enumerated. Fixes: 7d8905d06405 ("serial: 8250_pci: Enable device after we check black list") Cc: stable Reported-by: Guan Yung Tseng Tested-by: Guan Yung Tseng Tested-by: KHUENY.Gerhard Signed-off-by: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman

tty: serial: 8250_mtk: always resume the device in probe.

2018-12-13T08:16:22+00:00

commit 100bc3e2bebf95506da57cbdf5f26b25f6da4c81 upstream. serial8250_register_8250_port calls uart_config_port, which calls config_port on the port before it tries to power on the port. So we need the port to be on before calling serial8250_register_8250_port. Change the code to always do a runtime resume in probe before registering port, and always do a runtime suspend in remove. This basically reverts the change in commit 68e5fc4a255a ("tty: serial: 8250_mtk: use pm_runtime callbacks for enabling"), but still use pm_runtime callbacks. Fixes: 68e5fc4a255a ("tty: serial: 8250_mtk: use pm_runtime callbacks for enabling") Signed-off-by: Peter Shih Cc: stable Signed-off-by: Greg Kroah-Hartman

serial: 8250_of: Fix for lack of interrupt support

2018-11-21T08:19:11+00:00

[ Upstream commit a27d938251ef40c43db81af16fc26b2cec181d4d ] In commit c58caaab3bf8 ("serial: 8250: of: Defer probe on missing IRQ"), a check was added for the UART driver being probed prior to the parent IRQ controller. Unfortunately this breaks certain boards which have no interrupt support, like Huawei D03. Indeed, the 8250 DT bindings state that interrupts should be supported - not must. To fix, switch from irq_of_parse_and_map() to of_irq_get(), which does relay whether the IRQ host controller domain is not ready, i.e. defer probe, instead of assuming it. Fixes: c58caaab3bf8 ("serial: 8250: of: Defer probe on missing IRQ") Signed-off-by: John Garry Reviewed-by: Rob Herring Reviewed-by: Alexander Sverdlin Tested-by: Alexander Sverdlin Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Revert "serial: 8250_dw: Fix runtime PM handling"

2018-10-02T21:35:10+00:00

This reverts commit d76c74387e1c978b6c5524a146ab0f3f72206f98. While commit d76c74387e1c ("serial: 8250_dw: Fix runtime PM handling") fixes runtime PM handling when using kgdb, it introduces a traceback for everyone else. BUG: sleeping function called from invalid context at /mnt/host/source/src/third_party/kernel/next/drivers/base/power/runtime.c:1034 in_atomic(): 1, irqs_disabled(): 1, pid: 1, name: swapper/0 7 locks held by swapper/0/1: #0: 000000005ec5bc72 (&dev->mutex){....}, at: __driver_attach+0xb5/0x12b #1: 000000005d5fa9e5 (&dev->mutex){....}, at: __device_attach+0x3e/0x15b #2: 0000000047e93286 (serial_mutex){+.+.}, at: serial8250_register_8250_port+0x51/0x8bb #3: 000000003b328f07 (port_mutex){+.+.}, at: uart_add_one_port+0xab/0x8b0 #4: 00000000fa313d4d (&port->mutex){+.+.}, at: uart_add_one_port+0xcc/0x8b0 #5: 00000000090983ca (console_lock){+.+.}, at: vprintk_emit+0xdb/0x217 #6: 00000000c743e583 (console_owner){-...}, at: console_unlock+0x211/0x60f irq event stamp: 735222 __down_trylock_console_sem+0x4a/0x84 console_unlock+0x338/0x60f __do_softirq+0x4a4/0x50d irq_exit+0x64/0xe2 CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.19.0-rc5 #6 Hardware name: Google Caroline/Caroline, BIOS Google_Caroline.7820.286.0 03/15/2017 Call Trace: dump_stack+0x7d/0xbd ___might_sleep+0x238/0x259 __pm_runtime_resume+0x4e/0xa4 ? serial8250_rpm_get+0x2e/0x44 serial8250_console_write+0x44/0x301 ? lock_acquire+0x1b8/0x1fa console_unlock+0x577/0x60f vprintk_emit+0x1f0/0x217 printk+0x52/0x6e register_console+0x43b/0x524 uart_add_one_port+0x672/0x8b0 ? set_io_from_upio+0x150/0x162 serial8250_register_8250_port+0x825/0x8bb dw8250_probe+0x80c/0x8b0 ? dw8250_serial_inq+0x8e/0x8e ? dw8250_check_lcr+0x108/0x108 ? dw8250_runtime_resume+0x5b/0x5b ? dw8250_serial_outq+0xa1/0xa1 ? dw8250_remove+0x115/0x115 platform_drv_probe+0x76/0xc5 really_probe+0x1f1/0x3ee ? driver_allows_async_probing+0x5d/0x5d driver_probe_device+0xd6/0x112 ? driver_allows_async_probing+0x5d/0x5d bus_for_each_drv+0xbe/0xe5 __device_attach+0xdd/0x15b bus_probe_device+0x5a/0x10b device_add+0x501/0x894 ? _raw_write_unlock+0x27/0x3a platform_device_add+0x224/0x2b7 mfd_add_device+0x718/0x75b ? __kmalloc+0x144/0x16a ? mfd_add_devices+0x38/0xdb mfd_add_devices+0x9b/0xdb intel_lpss_probe+0x7d4/0x8ee intel_lpss_pci_probe+0xac/0xd4 pci_device_probe+0x101/0x18e ... Revert the offending patch until a more comprehensive solution is available. Cc: Tony Lindgren Cc: Andy Shevchenko Cc: Phil Edworthy Fixes: d76c74387e1c ("serial: 8250_dw: Fix runtime PM handling") Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

Merge tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2018-08-18T18:04:51+00:00

Pull char/misc driver updates from Greg KH: "Here is the bit set of char/misc drivers for 4.19-rc1 There is a lot here, much more than normal, seems like everyone is writing new driver subsystems these days... Anyway, major things here are: - new FSI driver subsystem, yet-another-powerpc low-level hardware bus - gnss, finally an in-kernel GPS subsystem to try to tame all of the crazy out-of-tree drivers that have been floating around for years, combined with some really hacky userspace implementations. This is only for GNSS receivers, but you have to start somewhere, and this is great to see. Other than that, there are new slimbus drivers, new coresight drivers, new fpga drivers, and loads of DT bindings for all of these and existing drivers. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits) android: binder: Rate-limit debug and userspace triggered err msgs fsi: sbefifo: Bump max command length fsi: scom: Fix NULL dereference misc: mic: SCIF Fix scif_get_new_port() error handling misc: cxl: changed asterisk position genwqe: card_base: Use true and false for boolean values misc: eeprom: assignment outside the if statement uio: potential double frees if __uio_register_device() fails eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency misc: ti-st: Fix memory leak in the error path of probe() android: binder: Show extra_buffers_size in trace firmware: vpd: Fix section enabled flag on vpd_section_destroy platform: goldfish: Retire pdev_bus goldfish: Use dedicated macros instead of manual bit shifting goldfish: Add missing includes to goldfish.h mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux dt-bindings: mux: add adi,adgs1408 Drivers: hv: vmbus: Cleanup synic memory free path Drivers: hv: vmbus: Remove use of slow_virt_to_phys() Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind() ...

tty: serial: 8250: Revert NXP SC16C2552 workaround

2018-08-12T16:53:30+00:00

Revert commit ecb988a3b7985913d1f0112f66667cdd15e40711: tty: serial: 8250: 8250_core: NXP SC16C2552 workaround The above commit causes userland application to no longer write correctly its first write to a dumb terminal connected to /dev/ttyS0. This commit seems to be the culprit. It's as though the TX FIFO is being reset during that write. What should be displayed is: PSW 80000000 INST 00000000 HALT // What is displayed is some variation of: T 00000000 HAL// Reverting this commit via this patch fixes my problem. Signed-off-by: Mark Hounschell Fixes: ecb988a3b798 ("tty: serial: 8250: 8250_core: NXP SC16C2552 workaround") Cc: stable Signed-off-by: Greg Kroah-Hartman