kernel/linux.git/drivers/tty/serial/8250, branch linux-4.4.y

tty: Add support for Brainboxes UC cards.

2022-02-03T08:27:52+00:00

commit 152d1afa834c84530828ee031cf07a00e0fc0b8c upstream. This commit adds support for the some of the Brainboxes PCI range of cards, including the UC-101, UC-235/246, UC-257, UC-268, UC-275/279, UC-302, UC-310, UC-313, UC-320/324, UC-346, UC-357, UC-368 and UC-420/431. Signed-off-by: Cameron Williams Cc: stable Link: https://lore.kernel.org/r/AM5PR0202MB2564688493F7DD9B9C610827C45E9@AM5PR0202MB2564.eurprd02.prod.outlook.com Signed-off-by: Greg Kroah-Hartman

serial: 8250_dw: Drop wrong use of ACPI_PTR()

2021-11-26T10:58:40+00:00

[ Upstream commit ebabb77a2a115b6c5e68f7364b598310b5f61fb2 ] ACPI_PTR() is more harmful than helpful. For example, in this case if CONFIG_ACPI=n, the ID table left unused which is not what we want. Instead of adding ifdeffery here and there, drop ACPI_PTR(). Fixes: 6a7320c4669f ("serial: 8250_dw: Add ACPI 5.0 support") Reported-by: Daniel Palmer Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20211005134516.23218-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

serial: 8250_pci: make setup_port() parameters explicitly unsigned

2021-09-22T09:41:25+00:00

[ Upstream commit 3a96e97ab4e835078e6f27b7e1c0947814df3841 ] The bar and offset parameters to setup_port() are used in pointer math, and while it would be very difficult to get them to wrap as a negative number, just be "safe" and make them unsigned so that static checkers do not trip over them unintentionally. Cc: Jiri Slaby Reported-by: Jordy Zomer Link: https://lore.kernel.org/r/20210726130717.2052096-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

serial: 8250: Define RX trigger levels for OxSemi 950 devices

2021-09-22T09:41:25+00:00

[ Upstream commit d7aff291d069c4418285f3c8ee27b0ff67ce5998 ] Oxford Semiconductor 950 serial port devices have a 128-byte FIFO and in the enhanced (650) mode, which we select in `autoconfig_has_efr' with the ECB bit set in the EFR register, they support the receive interrupt trigger level selectable with FCR bits 7:6 from the set of 16, 32, 112, 120. This applies to the original OX16C950 discrete UART[1] as well as 950 cores embedded into more complex devices. For these devices we set the default to 112, which sets an excessively high level of 112 or 7/8 of the FIFO capacity, unlike with other port types where we choose at most 1/2 of their respective FIFO capacities. Additionally we don't make the trigger level configurable. Consequently frequent input overruns happen with high bit rates where hardware flow control cannot be used (e.g. terminal applications) even with otherwise highly-performant systems. Lower the default receive interrupt trigger level to 32 then, and make it configurable. Document the trigger levels along with other port types, including the set of 16, 32, 64, 112 for the transmit interrupt as well[2]. References: [1] "OX16C950 rev B High Performance UART with 128 byte FIFOs", Oxford Semiconductor, Inc., DS-0031, Sep 05, Table 10: "Receiver Trigger Levels", p. 22 [2] same, Table 9: "Transmit Interrupt Trigger Levels", p. 22 Signed-off-by: Maciej W. Rozycki Link: https://lore.kernel.org/r/alpine.DEB.2.21.2106260608480.37803@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

serial: 8250: Mask out floating 16/32-bit bus bits

2021-08-15T10:59:56+00:00

commit e5227c51090e165db4b48dcaa300605bfced7014 upstream. Make sure only actual 8 bits of the IIR register are used in determining the port type in `autoconfig'. The `serial_in' port accessor returns the `unsigned int' type, meaning that with UPIO_AU, UPIO_MEM16, UPIO_MEM32, and UPIO_MEM32BE access types more than 8 bits of data are returned, of which the high order bits will often come from bus lines that are left floating in the data phase. For example with the MIPS Malta board's CBUS UART, where the registers are aligned on 8-byte boundaries and which uses 32-bit accesses, data as follows is returned: YAMON> dump -32 0xbf000900 0x40 BF000900: 1F000942 1F000942 1F000900 1F000900 ...B...B........ BF000910: 1F000901 1F000901 1F000900 1F000900 ................ BF000920: 1F000900 1F000900 1F000960 1F000960 ...........`...` BF000930: 1F000900 1F000900 1F0009FF 1F0009FF ................ YAMON> Evidently high-order 24 bits return values previously driven in the address phase (the 3 highest order address bits used with the command above are masked out in the simple virtual address mapping used here and come out at zeros on the external bus), a common scenario with bus lines left floating, due to bus capacitance. Consequently when the value of IIR, mapped at 0x1f000910, is retrieved in `autoconfig', it comes out at 0x1f0009c1 and when it is right-shifted by 6 and then assigned to 8-bit `scratch' variable, the value calculated is 0x27, not one of 0, 1, 2, 3 expected in port type determination. Fix the issue then, by assigning the value returned from `serial_in' to `scratch' first, which masks out 24 high-order bits retrieved, and only then right-shift the resulting 8-bit data quantity, producing the value of 3 in this case, as expected. Fix the same issue in `serial_dl_read'. The problem first appeared with Linux 2.6.9-rc3 which predates our repo history, but the origin could be identified with the old MIPS/Linux repo also at: as commit e0d2356c0777 ("Merge with Linux 2.6.9-rc3."), where code in `serial_in' was updated with this case: + case UPIO_MEM32: + return readl(up->port.membase + offset); + which made it produce results outside the unsigned 8-bit range for the first time, though obviously it is system dependent what actual values appear in the high order bits retrieved and it may well have been zeros in the relevant positions with the system the change originally was intended for. It is at that point that code in `autoconf' should have been updated accordingly, but clearly it was overlooked. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org # v2.6.12+ Reviewed-by: Philippe Mathieu-Daudé Signed-off-by: Maciej W. Rozycki Link: https://lore.kernel.org/r/alpine.DEB.2.21.2106260516220.37803@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman

tty: serial: 8250: serial_cs: Fix a memory leak in error handling path

2021-07-20T14:22:41+00:00

[ Upstream commit fad92b11047a748c996ebd6cfb164a63814eeb2e ] In the probe function, if the final 'serial_config()' fails, 'info' is leaking. Add a resource handling path to free this memory. Signed-off-by: Christophe JAILLET Link: https://lore.kernel.org/r/dc25f96b7faebf42e60fe8d02963c941cf4d8124.1621971720.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

serial_cs: Add Option International GSM-Ready 56K/ISDN modem

2021-07-20T14:22:31+00:00

commit d495dd743d5ecd47288156e25c4d9163294a0992 upstream. Add support for Option International GSM-Ready 56K/ISDN PCMCIA modem card. Signed-off-by: Ondrej Zary Cc: stable Link: https://lore.kernel.org/r/20210611201940.23898-2-linux@zary.sk Signed-off-by: Greg Kroah-Hartman

serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access

2020-12-29T12:42:33+00:00

commit d96f04d347e4011977abdbb4da5d8f303ebd26f8 upstream. It has been observed that once per 300-1300 port openings the first transmitted byte is being corrupted on AM3352 ("v" written to FIFO appeared as "e" on the wire). It only happened if single byte has been transmitted right after port open, which means, DMA is not used for this transfer and the corruption never happened afterwards. Therefore I've carefully re-read the MDR1 errata (link below), which says "when accessing the MDR1 registers that causes a dummy under-run condition that will freeze the UART in IrDA transmission. In UART mode, this may corrupt the transferred data". Strictly speaking, omap_8250_mdr1_errataset() performs a read access and if the value is the same as should be written, exits without errata-recommended FIFO reset. A brief check of the serial_omap_mdr1_errataset() from the competing omap-serial driver showed it has no read access of MDR1. After removing the read access from omap_8250_mdr1_errataset() the data corruption never happened any more. Link: https://www.ti.com/lit/er/sprz360i/sprz360i.pdf Fixes: 61929cf0169d ("tty: serial: Add 8250-core based omap driver") Cc: stable@vger.kernel.org Signed-off-by: Alexander Sverdlin Link: https://lore.kernel.org/r/20201210055257.1053028-1-alexander.sverdlin@gmail.com Signed-off-by: Greg Kroah-Hartman

serial: 8250_mtk: Fix uart_get_baud_rate warning

2020-11-10T09:22:20+00:00

commit 912ab37c798770f21b182d656937072b58553378 upstream. Mediatek 8250 port supports speed higher than uartclk / 16. If the baud rates in both the new and the old termios setting are higher than uartclk / 16, the WARN_ON in uart_get_baud_rate() will be triggered. Passing NULL as the old termios so uart_get_baud_rate() will use uartclk / 16 - 1 as the new baud rate which will be replaced by the original baud rate later by tty_termios_encode_baud_rate() in mtk8250_set_termios(). Fixes: 551e553f0d4a ("serial: 8250_mtk: Fix high-speed baud rates clamping") Signed-off-by: Claire Chang Link: https://lore.kernel.org/r/20201102120749.374458-1-tientzu@chromium.org Cc: stable Signed-off-by: Greg Kroah-Hartman

serial: 8250_omap: Fix sleeping function called from invalid context during probe

2020-10-01T09:11:54+00:00

[ Upstream commit 4ce35a3617c0ac758c61122b2218b6c8c9ac9398 ] When booting j721e the following bug is printed: [ 1.154821] BUG: sleeping function called from invalid context at kernel/sched/completion.c:99 [ 1.154827] in_atomic(): 0, irqs_disabled(): 128, non_block: 0, pid: 12, name: kworker/0:1 [ 1.154832] 3 locks held by kworker/0:1/12: [ 1.154836] #0: ffff000840030728 ((wq_completion)events){+.+.}, at: process_one_work+0x1d4/0x6e8 [ 1.154852] #1: ffff80001214fdd8 (deferred_probe_work){+.+.}, at: process_one_work+0x1d4/0x6e8 [ 1.154860] #2: ffff00084060b170 (&dev->mutex){....}, at: __device_attach+0x38/0x138 [ 1.154872] irq event stamp: 63096 [ 1.154881] hardirqs last enabled at (63095): [] _raw_spin_unlock_irqrestore+0x70/0x78 [ 1.154887] hardirqs last disabled at (63096): [] _raw_spin_lock_irqsave+0x28/0x80 [ 1.154893] softirqs last enabled at (62254): [] _stext+0x488/0x564 [ 1.154899] softirqs last disabled at (62247): [] irq_exit+0x114/0x140 [ 1.154906] CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.6.0-rc6-next-20200318-00094-g45e4089b0bd3 #221 [ 1.154911] Hardware name: Texas Instruments K3 J721E SoC (DT) [ 1.154917] Workqueue: events deferred_probe_work_func [ 1.154923] Call trace: [ 1.154928] dump_backtrace+0x0/0x190 [ 1.154933] show_stack+0x14/0x20 [ 1.154940] dump_stack+0xe0/0x148 [ 1.154946] ___might_sleep+0x150/0x1f0 [ 1.154952] __might_sleep+0x4c/0x80 [ 1.154957] wait_for_completion_timeout+0x40/0x140 [ 1.154964] ti_sci_set_device_state+0xa0/0x158 [ 1.154969] ti_sci_cmd_get_device_exclusive+0x14/0x20 [ 1.154977] ti_sci_dev_start+0x34/0x50 [ 1.154984] genpd_runtime_resume+0x78/0x1f8 [ 1.154991] __rpm_callback+0x3c/0x140 [ 1.154996] rpm_callback+0x20/0x80 [ 1.155001] rpm_resume+0x568/0x758 [ 1.155007] __pm_runtime_resume+0x44/0xb0 [ 1.155013] omap8250_probe+0x2b4/0x508 [ 1.155019] platform_drv_probe+0x50/0xa0 [ 1.155023] really_probe+0xd4/0x318 [ 1.155028] driver_probe_device+0x54/0xe8 [ 1.155033] __device_attach_driver+0x80/0xb8 [ 1.155039] bus_for_each_drv+0x74/0xc0 [ 1.155044] __device_attach+0xdc/0x138 [ 1.155049] device_initial_probe+0x10/0x18 [ 1.155053] bus_probe_device+0x98/0xa0 [ 1.155058] deferred_probe_work_func+0x74/0xb0 [ 1.155063] process_one_work+0x280/0x6e8 [ 1.155068] worker_thread+0x48/0x430 [ 1.155073] kthread+0x108/0x138 [ 1.155079] ret_from_fork+0x10/0x18 To fix the bug we need to first call pm_runtime_enable() prior to any pm_runtime calls. Reported-by: Tomi Valkeinen Signed-off-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20200320125200.6772-1-peter.ujfalusi@ti.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin