kernel/linux.git/drivers/thunderbolt, branch v6.12.93

thunderbolt: property: Cap recursion depth in __tb_property_parse_dir()

2026-06-09T10:26:04+00:00

[ Upstream commit 928abe19fbf0127003abcb1ea69cabc1c897d0ab ] A DIRECTORY entry's value field is used as the dir_offset for a recursive call into __tb_property_parse_dir() with no depth counter. A crafted peer that chains DIRECTORY entries into a back-reference loop drives the parser until the kernel stack is exhausted and the guard page fires. Any untrusted XDomain peer (cable, dock, in-line inspector, adjacent host) that reaches the PROPERTIES_REQUEST control-plane exchange can trigger this without authentication. Thread a depth counter through tb_property_parse() and __tb_property_parse_dir(), and reject blocks that exceed TB_PROPERTY_MAX_DEPTH = 8. That is comfortably larger than any observed legitimate XDomain layout. Operators who do not need XDomain host-to-host discovery can disable the path entirely with thunderbolt.xdomain=0 on the kernel command line. Fixes: cdae7c07e3e3 ("thunderbolt: Add support for XDomain properties") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-6 Assisted-by: Codex:gpt-5-4 Signed-off-by: Michael Bommarito Signed-off-by: Mika Westerberg Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

thunderbolt: property: Reject dir_len < 4 to prevent size_t underflow

2026-06-09T10:25:59+00:00

commit de21b59c29e31c5108ddc04210631bbfab81b997 upstream. On the non-root path, __tb_property_parse_dir() takes dir_len from entry->length (u16 widened to size_t). Two distinct OOB conditions follow when entry->length < 4: 1. The non-root path begins with kmemdup(&block[dir_offset], sizeof(*dir->uuid), ...) which always reads 4 dwords from dir_offset. tb_property_entry_valid() only enforces dir_offset + entry->length <= block_len, so a crafted entry with dir_offset close to the end of the property block and entry->length in 0..3 passes that gate but lets the UUID copy run off the block (e.g. dir_offset = 497, dir_len = 3 in a 500-dword block reads block[497..501]). 2. After the kmemdup, content_len = dir_len - 4 underflows size_t to ~SIZE_MAX, nentries becomes SIZE_MAX / 4, and the entry walk runs OOB on each iteration until an entry fails validation or the kernel oopses on an unmapped page. Reject dir_len < 4 on the non-root path *before* the UUID kmemdup, which closes both holes. Also move INIT_LIST_HEAD(&dir->properties) up to immediately after the dir allocation so the new error-return path (and the existing uuid-alloc failure path) calling tb_property_free_dir() sees a walkable list rather than the zero-initialized NULL next/prev that list_for_each_entry_safe() would oops on. Fixes: cdae7c07e3e3 ("thunderbolt: Add support for XDomain properties") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-6 Assisted-by: Codex:gpt-5-4 Signed-off-by: Michael Bommarito Signed-off-by: Mika Westerberg Signed-off-by: Greg Kroah-Hartman

thunderbolt: property: Reject u32 wrap in tb_property_entry_valid()

2026-06-09T10:25:59+00:00

commit 01deda0152066c6c955f0619114ea6afa070aaec upstream. entry->value is u32 and entry->length is u16; the sum is performed in u32 and wraps. A malicious XDomain peer can pick value = 0xffffff00, length = 0x100 so the sum 0x100000000 wraps to 0 and passes the > block_len check. tb_property_parse() then passes entry->value to parse_dwdata() as a dword offset into the property block, reading attacker-directed memory far past the allocation. For TEXT-typed entries with the "deviceid" or "vendorid" keys this lands in xd->device_name / xd->vendor_name and is readable back via the per-XDomain device_name / vendor_name sysfs attributes; the leak is NUL-bounded (kstrdup() stops at the first zero byte) and untargeted (the attacker picks a delta, not an absolute address). DATA-typed entries are parsed into property->value.data but not generically surfaced to userspace. Use check_add_overflow() so a wrapped sum is rejected. Fixes: cdae7c07e3e3 ("thunderbolt: Add support for XDomain properties") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-6 Assisted-by: Codex:gpt-5-4 Signed-off-by: Michael Bommarito Signed-off-by: Mika Westerberg Signed-off-by: Greg Kroah-Hartman

thunderbolt: Fix property read in nhi_wake_supported()

2026-04-11T12:24:49+00:00

commit 73a505dc48144ec72e25874e2b2a72487b02d3bc upstream. device_property_read_foo() returns 0 on success and only then modifies 'val'. Currently, val is left uninitialized if the aforementioned function returns non-zero, making nhi_wake_supported() return true almost always (random != 0) if the property is not present in device firmware. Invert the check to make it make sense. Fixes: 3cdb9446a117 ("thunderbolt: Add support for Intel Ice Lake") Cc: stable@vger.kernel.org Signed-off-by: Konrad Dybcio Signed-off-by: Mika Westerberg Signed-off-by: Greg Kroah-Hartman

thunderbolt: Add support for Intel Wildcat Lake

2025-12-06T21:24:59+00:00

commit 3575254546a27210a4b661ea37fbbfb836c0815d upstream. Intel Wildcat Lake derives its Thunderbolt/USB4 controller from Lunar Lake platform. Add Wildcat Lake PCI ID to the driver list of supported devices. Signed-off-by: Alan Borzeszkowski Cc: stable@vger.kernel.org Signed-off-by: Mika Westerberg Signed-off-by: Greg Kroah-Hartman

thunderbolt: Use is_pciehp instead of is_hotplug_bridge

2025-11-13T20:34:12+00:00

[ Upstream commit 5d03847175e81e86d4865456c15638faaf7c0634 ] The thunderbolt driver sets up device link dependencies from hotplug ports to the Host Router (aka Native Host Interface, NHI). When resuming from system sleep, this allows the Host Router to re-establish tunnels to attached Thunderbolt devices before the hotplug ports resume. To identify the hotplug ports, the driver utilizes the is_hotplug_bridge flag which also encompasses ACPI slots handled by the ACPI hotplug driver. Thunderbolt hotplug ports are always Hot-Plug Capable PCIe ports, so it is more apt to identify them with the is_pciehp flag. Similarly, hotplug ports on older Thunderbolt controllers have broken MSI support and are quirked to use legacy INTx interrupts instead. The quirk identifies them with is_hotplug_bridge, even though all affected ports are also matched by is_pciehp. So use is_pciehp here as well. Signed-off-by: Lukas Wunner Acked-by: Bjorn Helgaas Signed-off-by: Mika Westerberg Signed-off-by: Sasha Levin

thunderbolt: Fix copy+paste error in match_service_id()

2025-08-20T16:30:52+00:00

commit 5cc1f66cb23cccc704e3def27ad31ed479e934a5 upstream. The second instance of TBSVC_MATCH_PROTOCOL_VERSION seems to have been intended to be TBSVC_MATCH_PROTOCOL_REVISION. Fixes: d1ff70241a27 ("thunderbolt: Add support for XDomain discovery protocol") Cc: stable Signed-off-by: Eric Biggers Link: https://lore.kernel.org/r/20250721050136.30004-1-ebiggers@kernel.org Signed-off-by: Greg Kroah-Hartman

thunderbolt: Fix bit masking in tb_dp_port_set_hops()

2025-07-24T06:56:21+00:00

commit 2cdde91c14ec358087f43287513946d493aef940 upstream. The tb_dp_port_set_hops() function was incorrectly clearing ADP_DP_CS_1_AUX_RX_HOPID_MASK twice. According to the function's purpose, it should clear both TX and RX AUX HopID fields. Replace the first instance with ADP_DP_CS_1_AUX_TX_HOPID_MASK to ensure proper configuration of both AUX directions. Fixes: 98176380cbe5 ("thunderbolt: Convert DP adapter register names to follow the USB4 spec") Cc: stable@vger.kernel.org Signed-off-by: Alok Tiwari Signed-off-by: Mika Westerberg Signed-off-by: Greg Kroah-Hartman

thunderbolt: Fix wake on connect at runtime

2025-07-24T06:56:21+00:00

commit 58d71d4242ce057955c783a14c82270c71f9e1e8 upstream. commit 1a760d10ded37 ("thunderbolt: Fix a logic error in wake on connect") fixated on the USB4 port sysfs wakeup file not working properly to control policy, but it had an unintended side effect that the sysfs file controls policy both at runtime and at suspend time. The sysfs file is supposed to only control behavior while system is suspended. Pass whether programming a port for runtime into usb4_switch_set_wake() and if runtime then ignore the value in the sysfs file. Cc: stable@vger.kernel.org Reported-by: Alexander Kovacs Tested-by: Alexander Kovacs Fixes: 1a760d10ded37 ("thunderbolt: Fix a logic error in wake on connect") Signed-off-by: Mario Limonciello Signed-off-by: Mika Westerberg Signed-off-by: Greg Kroah-Hartman

thunderbolt: Fix a logic error in wake on connect

2025-06-19T13:32:11+00:00

[ Upstream commit 1a760d10ded372d113a0410c42be246315bbc2ff ] commit a5cfc9d65879c ("thunderbolt: Add wake on connect/disconnect on USB4 ports") introduced a sysfs file to control wake up policy for a given USB4 port that defaulted to disabled. However when testing commit 4bfeea6ec1c02 ("thunderbolt: Use wake on connect and disconnect over suspend") I found that it was working even without making changes to the power/wakeup file (which defaults to disabled). This is because of a logic error doing a bitwise or of the wake-on-connect flag with device_may_wakeup() which should have been a logical AND. Adjust the logic so that policy is only applied when wakeup is actually enabled. Fixes: a5cfc9d65879c ("thunderbolt: Add wake on connect/disconnect on USB4 ports") Signed-off-by: Mario Limonciello Signed-off-by: Mika Westerberg Signed-off-by: Sasha Levin