kernel/linux.git/drivers/thunderbolt, branch v4.14.85

thunderbolt: Prevent crash when ICM firmware is not running

2018-04-24T07:36:29+00:00

commit ea9d7bb798900096f26c585957d6ad9c532417e6 upstream. On Lenovo ThinkPad Yoga 370 (and possibly some other Lenovo models as well) the Thunderbolt host controller sometimes comes up in such way that the ICM firmware is not running properly. This is most likely an issue in BIOS/firmware but as side-effect driver crashes the kernel due to NULL pointer dereference: BUG: unable to handle kernel NULL pointer dereference at 0000000000000980 IP: pci_write_config_dword+0x5/0x20 Call Trace: pcie2cio_write+0x3b/0x70 [thunderbolt] icm_driver_ready+0x168/0x260 [thunderbolt] ? tb_ctl_start+0x50/0x70 [thunderbolt] tb_domain_add+0x73/0xf0 [thunderbolt] nhi_probe+0x182/0x300 [thunderbolt] local_pci_probe+0x42/0xa0 ? pci_match_device+0xd9/0x100 pci_device_probe+0x146/0x1b0 driver_probe_device+0x315/0x480 ... Instead of crashing update the driver to bail out gracefully if we encounter such situation. Fixes: f67cf491175a ("thunderbolt: Add support for Internal Connection Manager (ICM)") Reported-by: Jordan Glover Signed-off-by: Mika Westerberg Acked-by: Yehezkel Bernat Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

thunderbolt: Resume control channel after hibernation image is created

2018-04-24T07:36:29+00:00

commit f2a659f7d8d5da803836583aa16df06bdf324252 upstream. The driver misses implementation of PM hook that undoes what ->freeze_noirq() does after the hibernation image is created. This means the control channel is not resumed properly and the Thunderbolt bus becomes useless in later stages of hibernation (when the image is stored or if the operation fails). Fix this by pointing ->thaw_noirq to driver nhi_resume_noirq(). This makes sure the control channel is resumed properly. Fixes: 23dd5bb49d98 ("thunderbolt: Add suspend/hibernate support") Signed-off-by: Mika Westerberg Reviewed-by: Andy Shevchenko Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

thunderbolt: Serialize PCIe tunnel creation with PCI rescan

2018-04-24T07:36:29+00:00

commit a03e828915c00ed0ea5aa40647c81472cfa7a984 upstream. We need to make sure a new PCIe tunnel is not created in a middle of previous PCI rescan because otherwise the rescan code might find too much and fail to reconfigure devices properly. This is important when native PCIe hotplug is used. In BIOS assisted hotplug there should be no such issue. Fixes: f67cf491175a ("thunderbolt: Add support for Internal Connection Manager (ICM)") Signed-off-by: Mika Westerberg Reviewed-by: Andy Shevchenko Cc: Bjorn Helgaas Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

thunderbolt: Wait a bit longer for ICM to authenticate the active NVM

2018-04-24T07:36:29+00:00

commit e4be8c9b6a512e274cb6bbac4ac869d73880a8b3 upstream. Sometimes during cold boot ICM has not yet authenticated the active NVM image leading to timeout and failing the driver probe. Allow ICM to take some more time and increase the timeout to 3 seconds before we give up. While there fix icm_firmware_init() to return the real error code without overwriting it with -ENODEV. Fixes: f67cf491175a ("thunderbolt: Add support for Internal Connection Manager (ICM)") Signed-off-by: Mika Westerberg Reviewed-by: Andy Shevchenko Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

thunderbolt: tb: fix use after free in tb_activate_pcie_devices

2017-12-20T09:10:24+00:00

[ Upstream commit a2e373438f72391493a4425efc1b82030b6b4fd5 ] Add a ̣̣continue statement in order to avoid using a previously free'd pointer tunnel in list_add. Addresses-Coverity-ID: 1415336 Fixes: 9d3cce0b6136 ("thunderbolt: Introduce thunderbolt bus and connection manager") Signed-off-by: Gustavo A. R. Silva Acked-by: Mika Westerberg Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

Merge tag 'acpi-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2017-09-05T19:45:03+00:00

Pull ACPI updates from Rafael Wysocki: "These include a usual ACPICA code update (this time to upstream revision 20170728), a fix for a boot crash on some systems with Thunderbolt devices connected at boot time, a rework of the handling of PCI bridges when setting up device wakeup, new support for Apple device properties, support for DMA configurations reported via ACPI on ARM64, APEI-related updates, ACPI EC driver updates and assorted minor modifications in several places. Specifics: - Update the ACPICA code in the kernel to upstream revision 20170728 including: * Alias operator handling update (Bob Moore). * Deferred resolution of reference package elements (Bob Moore). * Support for the _DMA method in walk resources (Bob Moore). * Tables handling update and support for deferred table verification (Lv Zheng). * Update of SMMU models for IORT (Robin Murphy). * Compiler and disassembler updates (Alex James, Erik Schmauss, Ganapatrao Kulkarni, James Morse). * Tools updates (Erik Schmauss, Lv Zheng). * Assorted minor fixes and cleanups (Bob Moore, Kees Cook, Lv Zheng, Shao Ming). - Rework the initialization of non-wakeup GPEs with method handlers in order to address a boot crash on some systems with Thunderbolt devices connected at boot time where we miss an early hotplug event due to a delay in GPE enabling (Rafael Wysocki). - Rework the handling of PCI bridges when setting up ACPI-based device wakeup in order to avoid disabling wakeup for bridges prematurely (Rafael Wysocki). - Consolidate Apple DMI checks throughout the tree, add support for Apple device properties to the device properties framework and use these properties for the handling of I2C and SPI devices on Apple systems (Lukas Wunner). - Add support for _DMA to the ACPI-based device properties lookup code and make it possible to use the information from there to configure DMA regions on ARM64 systems (Lorenzo Pieralisi). - Fix several issues in the APEI code, add support for exporting the BERT error region over sysfs and update APEI MAINTAINERS entry with reviewers information (Borislav Petkov, Dongjiu Geng, Loc Ho, Punit Agrawal, Tony Luck, Yazen Ghannam). - Fix a potential initialization ordering issue in the ACPI EC driver and clean it up somewhat (Lv Zheng). - Update the ACPI SPCR driver to extend the existing XGENE 8250 workaround in it to a new platform (m400) and to work around an Xgene UART clock issue (Graeme Gregory). - Add a new utility function to the ACPI core to support using ACPI OEM ID / OEM Table ID / Revision for system identification in blacklisting or similar and switch over the existing code already using this information to this new interface (Toshi Kani). - Fix an xpower PMIC issue related to GPADC reads that always return 0 without extra pin manipulations (Hans de Goede). - Add statements to print debug messages in a couple of places in the ACPI core for easier diagnostics (Rafael Wysocki). - Clean up the ACPI processor driver slightly (Colin Ian King, Hanjun Guo). - Clean up the ACPI x86 boot code somewhat (Andy Shevchenko). - Add a quirk for Dell OptiPlex 9020M to the ACPI backlight driver (Alex Hung). - Assorted fixes, cleanups and updates related to ACPI (Amitoj Kaur Chawla, Bhumika Goyal, Frank Rowand, Jean Delvare, Punit Agrawal, Ronald Tschalär, Sumeet Pawnikar)" * tag 'acpi-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (75 commits) ACPI / APEI: Suppress message if HEST not present intel_pstate: convert to use acpi_match_platform_list() ACPI / blacklist: add acpi_match_platform_list() ACPI, APEI, EINJ: Subtract any matching Register Region from Trigger resources ACPI: make device_attribute const ACPI / sysfs: Extend ACPI sysfs to provide access to boot error region ACPI: APEI: fix the wrong iteration of generic error status block ACPI / processor: make function acpi_processor_check_duplicates() static ACPI / EC: Clean up EC GPE mask flag ACPI: EC: Fix possible issues related to EC initialization order ACPI / PM: Add debug statements to acpi_pm_notify_handler() ACPI: Add debug statements to acpi_global_event_handler() ACPI / scan: Enable GPEs before scanning the namespace ACPICA: Make it possible to enable runtime GPEs earlier ACPICA: Dispatch active GPEs at init time ACPI: SPCR: work around clock issue on xgene UART ACPI: SPCR: extend XGENE 8250 workaround to m400 ACPI / LPSS: Don't abort ACPI scan on missing mem resource mailbox: pcc: Drop uninformative output during boot ACPI/IORT: Add IORT named component memory address limits ...

Merge branches 'acpi-x86', 'acpi-soc', 'acpi-pmic' and 'acpi-apple'

2017-09-03T21:54:03+00:00

* acpi-x86: ACPI / boot: Add number of legacy IRQs to debug output ACPI / boot: Correct address space of __acpi_map_table() ACPI / boot: Don't define unused variables * acpi-soc: ACPI / LPSS: Don't abort ACPI scan on missing mem resource * acpi-pmic: ACPI / PMIC: xpower: Do pinswitch magic when reading GPADC * acpi-apple: spi: Use Apple device properties in absence of ACPI resources ACPI / scan: Recognize Apple SPI and I2C slaves ACPI / property: Support Apple _DSM properties ACPI / property: Don't evaluate objects for devices w/o handle treewide: Consolidate Apple DMI checks

thunderbolt: Fix reset response_type

2017-08-28T14:21:32+00:00

There is a mistake here where we accidentally use sizeof(TB_CFG_PKG_RESET) instead of just TB_CFG_PKG_RESET. The size of an int is 4 so it's the same as TB_CFG_PKG_NOTIFY_ACK. Fixes: d7f781bfdbf4 ("thunderbolt: Rework control channel to be more reliable") Reported-by: Colin King Signed-off-by: Dan Carpenter Acked-by: Mika Westerberg Cc: stable # 4.13 Signed-off-by: Greg Kroah-Hartman

thunderbolt: Allow clearing the key

2017-08-28T14:21:32+00:00

If secure authentication of a devices fails, either because the device already has another key uploaded, or there is some other error sending challenge to the device, and the user only wants to approve the device just once (without a new key being uploaded to the device) the current implementation does not allow this because the key cannot be cleared once set even if we allow it to be changed. Make this scenario possible and allow clearing the key by writing empty string to the key sysfs file. Signed-off-by: Yehezkel Bernat Acked-by: Mika Westerberg Signed-off-by: Greg Kroah-Hartman