kernel/linux.git/drivers/thunderbolt/switch.c, branch v6.12.80

thunderbolt: Fix bit masking in tb_dp_port_set_hops()

2025-07-24T06:56:21+00:00

commit 2cdde91c14ec358087f43287513946d493aef940 upstream. The tb_dp_port_set_hops() function was incorrectly clearing ADP_DP_CS_1_AUX_RX_HOPID_MASK twice. According to the function's purpose, it should clear both TX and RX AUX HopID fields. Replace the first instance with ADP_DP_CS_1_AUX_TX_HOPID_MASK to ensure proper configuration of both AUX directions. Fixes: 98176380cbe5 ("thunderbolt: Convert DP adapter register names to follow the USB4 spec") Cc: stable@vger.kernel.org Signed-off-by: Alok Tiwari Signed-off-by: Mika Westerberg Signed-off-by: Greg Kroah-Hartman

thunderbolt: Fix wake on connect at runtime

2025-07-24T06:56:21+00:00

commit 58d71d4242ce057955c783a14c82270c71f9e1e8 upstream. commit 1a760d10ded37 ("thunderbolt: Fix a logic error in wake on connect") fixated on the USB4 port sysfs wakeup file not working properly to control policy, but it had an unintended side effect that the sysfs file controls policy both at runtime and at suspend time. The sysfs file is supposed to only control behavior while system is suspended. Pass whether programming a port for runtime into usb4_switch_set_wake() and if runtime then ignore the value in the sysfs file. Cc: stable@vger.kernel.org Reported-by: Alexander Kovacs Tested-by: Alexander Kovacs Fixes: 1a760d10ded37 ("thunderbolt: Fix a logic error in wake on connect") Signed-off-by: Mario Limonciello Signed-off-by: Mika Westerberg Signed-off-by: Greg Kroah-Hartman

thunderbolt: Mark XDomain as unplugged when router is removed

2024-08-06T05:01:10+00:00

I noticed that when we do discrete host router NVM upgrade and it gets hot-removed from the PCIe side as a result of NVM firmware authentication, if there is another host connected with enabled paths we hang in tearing them down. This is due to fact that the Thunderbolt networking driver also tries to cleanup the paths and ends up blocking in tb_disconnect_xdomain_paths() waiting for the domain lock. However, at this point we already cleaned the paths in tb_stop() so there is really no need for tb_disconnect_xdomain_paths() to do that anymore. Furthermore it already checks if the XDomain is unplugged and bails out early so take advantage of that and mark the XDomain as unplugged when we remove the parent router. Cc: stable@vger.kernel.org Signed-off-by: Mika Westerberg

thunderbolt: Avoid notify PM core about runtime PM resume

2024-04-10T07:49:58+00:00

Currently we notify PM core about occurred wakes after any resume. This is not actually needed after resume from runtime suspend. Hence, notify PM core about occurred wakes only after resume from system sleep. Also, if the wake occurred in USB4 router upstream port, we don't notify the PM core about it since it is not actually needed and can cause unexpected autowake (e.g. if /sys/power/wakeup_count is used). While there add the missing kernel-doc for tb_switch_resume(). Signed-off-by: Gil Fine Cc: stable@vger.kernel.org Signed-off-by: Mika Westerberg

thunderbolt: Fix wake configurations after device unplug

2024-04-10T07:49:58+00:00

Currently we don't configure correctly the wake events after unplug of device router. What can happen is that the downstream ports of host router will be configured to wake on: USB4-wake and wake-on-disconnect, but not on wake-on-connect. This may cause the later plugged device not to wake the domain and fail in enumeration. Fix this by clearing downstream port's "USB4 Port is Configured" bit, after unplug of a device router. Signed-off-by: Gil Fine Cc: stable@vger.kernel.org Signed-off-by: Mika Westerberg

Merge tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2024-03-21T19:35:20+00:00

Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt changes for 6.9-rc1. Lots of tiny changes and forward progress to support new hardware and better support for existing devices. Included in here are: - Thunderbolt (i.e. USB4) updates for newer hardware and uses as more people start to use the hardware - default USB authentication mode Kconfig and documentation update to make it more obvious what is going on - USB typec updates and enhancements - usual dwc3 driver updates - usual xhci driver updates - function USB (i.e. gadget) driver updates and additions - new device ids for lots of drivers - loads of other small updates, full details in the shortlog All of these, including a "last minute regression fix" have been in linux-next with no reported issues" * tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (185 commits) usb: usb-acpi: Fix oops due to freeing uninitialized pld pointer usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logic phy: tegra: xusb: Add API to retrieve the port number of phy USB: gadget: pxa27x_udc: Remove unused of_gpio.h usb: gadget/snps_udc_plat: Remove unused of_gpio.h usb: ohci-pxa27x: Remove unused of_gpio.h usb: sl811-hcd: only defined function checkdone if QUIRK2 is defined usb: Clarify expected behavior of dev_bin_attrs_are_visible() xhci: Allow RPM on the USB controller (1022:43f7) by default usb: isp1760: remove SLAB_MEM_SPREAD flag usage usb: misc: onboard_hub: use pointer consistently in the probe function usb: gadget: fsl: Increase size of name buffer for endpoints usb: gadget: fsl: Add of device table to enable module autoloading usb: typec: tcpm: add support to set tcpc connector orientatition usb: typec: tcpci: add generic tcpci fallback compatible dt-bindings: usb: typec-tcpci: add tcpci fallback binding usb: gadget: fsl-udc: Replace custom log wrappers by dev_{err,warn,dbg,vdbg} usb: core: Set connect_type of ports based on DT node dt-bindings: usb: Add downstream facing ports to realtek binding ...

thunderbolt: Constify the struct device_type usage

2024-02-26T07:15:49+00:00

Since commit aed65af1cc2f ("drivers: make device_type const"), the driver core can properly handle constant struct device_type. Move the tb_domain_type, tb_retimer_type, tb_switch_type, usb4_port_device_type, tb_service_type and tb_xdomain_type variables to be constant structures as well, placing it into read-only memory which can not be modified at runtime. Cc: Greg Kroah-Hartman Signed-off-by: Ricardo B. Marliere Signed-off-by: Mika Westerberg

thunderbolt: Fix NULL pointer dereference in tb_port_update_credits()

2024-02-16T08:36:51+00:00

Olliver reported that his system crashes when plugging in Thunderbolt 1 device: BUG: kernel NULL pointer dereference, address: 0000000000000020 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:tb_port_do_update_credits+0x1b/0x130 [thunderbolt] Call Trace: ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? exc_page_fault+0x7f/0x180 ? asm_exc_page_fault+0x26/0x30 ? tb_port_do_update_credits+0x1b/0x130 ? tb_switch_update_link_attributes+0x83/0xd0 tb_switch_add+0x7a2/0xfe0 tb_scan_port+0x236/0x6f0 tb_handle_hotplug+0x6db/0x900 process_one_work+0x171/0x340 worker_thread+0x27b/0x3a0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 This is due the fact that some Thunderbolt 1 devices only have one lane adapter. Fix this by checking for the lane 1 before we read its credits. Reported-by: Olliver Schinagl Closes: https://lore.kernel.org/linux-usb/c24c7882-6254-4e68-8f22-f3e8f65dc84f@schinagl.nl/ Fixes: 81af2952e606 ("thunderbolt: Add support for asymmetric link") Cc: stable@vger.kernel.org Cc: Gil Fine Signed-off-by: Mika Westerberg

thunderbolt: Remove usage of the deprecated ida_simple_xx() API

2024-01-23T11:30:20+00:00

ida_alloc() and ida_free() should be preferred to the deprecated ida_simple_get() and ida_simple_remove(). Note that the upper limit of ida_simple_get() is exclusive, but the one of ida_alloc_range()/ida_alloc_max() is inclusive. So a -1 has been added when needed. Signed-off-by: Christophe JAILLET Signed-off-by: Mika Westerberg

thunderbolt: Fix rollback in tb_port_lane_bonding_enable() for lane 1

2024-01-22T11:34:19+00:00

If enabling lane bonding on lane 1 of a USB4 port results in an error, the rollback should set TB_LINK_WIDTH_SINGLE for both lanes. Signed-off-by: Mohammad Rahimi Signed-off-by: Mika Westerberg