kernel/linux.git/drivers/thunderbolt/retimer.c, branch v6.12.80

thunderbolt: Do not add non-active NVM if NVM upgrade is disabled for retimer

2025-05-29T09:02:16+00:00

[ Upstream commit ad79c278e478ca8c1a3bf8e7a0afba8f862a48a1 ] This is only used to write a new NVM in order to upgrade the retimer firmware. It does not make sense to expose it if upgrade is disabled. This also makes it consistent with the router NVM upgrade. Signed-off-by: Mika Westerberg Signed-off-by: Sasha Levin

thunderbolt: Don't display nvm_version unless upgrade supported

2024-12-27T13:02:09+00:00

commit e34f1717ef0632fcec5cb827e5e0e9f223d70c9b upstream. The read will never succeed if NVM wasn't initialized due to an unknown format. Add a new callback for visibility to only show when supported. Cc: stable@vger.kernel.org Fixes: aef9c693e7e5 ("thunderbolt: Move vendor specific NVM handling into nvm.c") Reported-by: Richard Hughes Closes: https://github.com/fwupd/fwupd/issues/8200 Signed-off-by: Mario Limonciello Signed-off-by: Mika Westerberg Signed-off-by: Greg Kroah-Hartman

Merge tag 'thunderbolt-for-v6.12-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus

2024-11-07T15:11:57+00:00

thunderbolt: Fixes for v6.12-rc7 This includes following USB4/Thunderbolt fixes for v6.12-rc7: - Fix for retimer enumeration. - Fix connection issue with Pluggable UD-4VPD USB4 dock. Both have been in linux-next with no reported issues. * tag 'thunderbolt-for-v6.12-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: thunderbolt: Fix connection issue with Pluggable UD-4VPD dock thunderbolt: Add only on-board retimers when !CONFIG_USB4_DEBUGFS_MARGINING

thunderbolt: Add only on-board retimers when !CONFIG_USB4_DEBUGFS_MARGINING

2024-10-29T05:48:42+00:00

Normally there is no need to enumerate retimers on the other side of the cable. This is only needed in special cases where user wants to run receiver lane margining against the downstream facing port of a retimer. Furthermore this might confuse the userspace tools such as fwupd because it cannot read the information it expects from these retimers. Fix this by changing the retimer enumeration code to add only on-board retimers when CONFIG_USB4_DEBUGFS_MARGINING is not enabled. Reported-by: AceLan Kao Tested-by: AceLan Kao Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219420 Cc: stable@vger.kernel.org Fixes: ff6ab055e070 ("thunderbolt: Add receiver lane margining support for retimers") Signed-off-by: Mika Westerberg

thunderbolt: Fix KASAN reported stack out-of-bounds read in tb_retimer_scan()

2024-10-11T11:23:15+00:00

KASAN reported following issue: BUG: KASAN: stack-out-of-bounds in tb_retimer_scan+0xffe/0x1550 [thunderbolt] Read of size 4 at addr ffff88810111fc1c by task kworker/u56:0/11 CPU: 0 UID: 0 PID: 11 Comm: kworker/u56:0 Tainted: G U 6.11.0+ #1387 Tainted: [U]=USER Workqueue: thunderbolt0 tb_handle_hotplug [thunderbolt] Call Trace: dump_stack_lvl+0x6c/0x90 print_report+0xd1/0x630 kasan_report+0xdb/0x110 __asan_report_load4_noabort+0x14/0x20 tb_retimer_scan+0xffe/0x1550 [thunderbolt] tb_scan_port+0xa6f/0x2060 [thunderbolt] tb_handle_hotplug+0x17b1/0x3080 [thunderbolt] process_one_work+0x626/0x1100 worker_thread+0x6c8/0xfa0 kthread+0x2c8/0x3a0 ret_from_fork+0x3a/0x80 ret_from_fork_asm+0x1a/0x30 This happens because the loop variable still gets incremented by one so max becomes 3 instead of 2, and this makes the second loop read past the the array declared on the stack. Fix this by assigning to max directly in the loop body. Fixes: ff6ab055e070 ("thunderbolt: Add receiver lane margining support for retimers") CC: stable@vger.kernel.org Signed-off-by: Mika Westerberg

thunderbolt: Add receiver lane margining support for retimers

2024-06-17T09:47:12+00:00

Retimers support lane margining as well so make this available through debugfs in the same way as we do for the USB4 ports. When this is enabled we also expose retimers on the other side of the cable because typically margining is implemented only on direction towards the cable. However, for the retimers on the other side of the cable we do not allow NVM upgrade to avoid confusing the existing userspace (the same retimer may now appear twice with different name) and is probably not a good idea anyway. Signed-off-by: Mika Westerberg

thunderbolt: Add sideband register access to debugfs

2024-06-17T09:47:11+00:00

This makes it possible to read and write USB4 port and retimer sideband registers through debugfs which is useful for debugging and manufacturing purposes. We add "sb_regs" debugfs attribute under each USB4 port and retimer that is used to access the sideband. Signed-off-by: Mika Westerberg

thunderbolt: Make usb4_port_sb_read/write() available outside of usb4.c

2024-06-17T09:47:11+00:00

We need to call these from other files too so make them available outside of usb4.c. Signed-off-by: Mika Westerberg

thunderbolt: No need to loop over all retimers if access fails

2024-04-23T05:12:09+00:00

When we read the NVM authentication status or unsetting the inbound SBTX there is no point to continue the loop after first access to a retimer fails because there won't be any more retimers after this anyway so bail out from the loops early. Signed-off-by: Mika Westerberg

thunderbolt: Constify the struct device_type usage

2024-02-26T07:15:49+00:00

Since commit aed65af1cc2f ("drivers: make device_type const"), the driver core can properly handle constant struct device_type. Move the tb_domain_type, tb_retimer_type, tb_switch_type, usb4_port_device_type, tb_service_type and tb_xdomain_type variables to be constant structures as well, placing it into read-only memory which can not be modified at runtime. Cc: Greg Kroah-Hartman Signed-off-by: Ricardo B. Marliere Signed-off-by: Mika Westerberg