kernel/linux.git/drivers/thunderbolt/domain.c, branch v6.3.2

thunderbolt: Convert to use sysfs_emit()/sysfs_emit_at() APIs

2022-09-24T06:22:01+00:00

Follow the advice of the Documentation/filesystems/sysfs.rst and show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. While at it, use Elvis operator in some cases. Signed-off-by: Andy Shevchenko Signed-off-by: Mika Westerberg

thunderbolt: test: Use kunit_test_suite() macro

2022-07-11T23:13:21+00:00

The new implementation of kunit_test_suite() for modules no longer conflicts with module_init, so can now be used by the thunderbolt tests. Also update the Kconfig entry to enable the test when KUNIT_ALL_TESTS is enabled. This means that kunit_tool can now successfully run and parse the test results with, for example: ./tools/testing/kunit/kunit.py run --arch=x86_64 \ --kconfig_add CONFIG_PCI=y --kconfig_add CONFIG_USB4=y \ 'thunderbolt' Acked-by: Mika Westerberg Acked-by: Daniel Latypov Acked-by: Brendan Higgins Signed-off-by: David Gow Signed-off-by: Shuah Khan

thunderbolt: Make iommu_dma_protection more accurate

2022-04-28T08:30:25+00:00

Between me trying to get rid of iommu_present() and Mario wanting to support the AMD equivalent of DMAR_PLATFORM_OPT_IN, scrutiny has shown that the iommu_dma_protection attribute is being far too optimistic. Even if an IOMMU might be present for some PCI segment in the system, that doesn't necessarily mean it provides translation for the device(s) we care about. Furthermore, all that DMAR_PLATFORM_OPT_IN really does is tell us that memory was protected before the kernel was loaded, and prevent the user from disabling the intel-iommu driver entirely. While that lets us assume kernel integrity, what matters for actual runtime DMA protection is whether we trust individual devices, based on the "external facing" property that we expect firmware to describe for Thunderbolt ports. It's proven challenging to determine the appropriate ports accurately given the variety of possible topologies, so while still not getting a perfect answer, by putting enough faith in firmware we can at least get a good bit closer. If we can see that any device near a Thunderbolt NHI has all the requisites for Kernel DMA Protection, chances are that it *is* a relevant port, but moreover that implies that firmware is playing the game overall, so we'll use that to assume that all Thunderbolt ports should be correctly marked and thus will end up fully protected. CC: Mario Limonciello Reviewed-by: Christoph Hellwig Acked-by: Mika Westerberg Signed-off-by: Robin Murphy Link: https://lore.kernel.org/r/b153f208bc9eafab5105bad0358b77366509d2d4.1650878781.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel

bus: Make remove callback return void

2021-07-21T09:53:42+00:00

The driver core ignores the return value of this callback because there is only little it can do when a device disappears. This is the final bit of a long lasting cleanup quest where several buses were converted to also return void from their remove callback. Additionally some resource leaks were fixed that were caused by drivers returning an error code in the expectation that the driver won't go away. With struct bus_type::remove returning void it's prevented that newly implemented buses return an ignored error code and so don't anticipate wrong expectations for driver authors. Reviewed-by: Tom Rix (For fpga) Reviewed-by: Mathieu Poirier Reviewed-by: Cornelia Huck (For drivers/s390 and drivers/vfio) Acked-by: Russell King (Oracle) (For ARM, Amba and related parts) Acked-by: Mark Brown Acked-by: Chen-Yu Tsai (for sunxi-rsb) Acked-by: Pali Rohár Acked-by: Mauro Carvalho Chehab (for media) Acked-by: Hans de Goede (For drivers/platform) Acked-by: Alexandre Belloni Acked-By: Vinod Koul Acked-by: Juergen Gross (For xen) Acked-by: Lee Jones (For mfd) Acked-by: Johannes Thumshirn (For mcb) Acked-by: Johan Hovold Acked-by: Srinivas Kandagatla (For slimbus) Acked-by: Kirti Wankhede (For vfio) Acked-by: Maximilian Luz Acked-by: Heikki Krogerus (For ulpi and typec) Acked-by: Samuel Iglesias Gonsálvez (For ipack) Acked-by: Geoff Levand (For ps3) Acked-by: Yehezkel Bernat (For thunderbolt) Acked-by: Alexander Shishkin (For intel_th) Acked-by: Dominik Brodowski (For pcmcia) Acked-by: Rafael J. Wysocki (For ACPI) Acked-by: Bjorn Andersson (rpmsg and apr) Acked-by: Srinivas Pandruvada (For intel-ish-hid) Acked-by: Dan Williams (For CXL, DAX, and NVDIMM) Acked-by: William Breathitt Gray (For isa) Acked-by: Stefan Richter (For firewire) Acked-by: Benjamin Tissoires (For hid) Acked-by: Thorsten Scherer (For siox) Acked-by: Sven Van Asbroeck (For anybuss) Acked-by: Ulf Hansson (For MMC) Acked-by: Wolfram Sang # for I2C Acked-by: Sudeep Holla Acked-by: Geert Uytterhoeven Acked-by: Dmitry Torokhov Acked-by: Finn Thain Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman

thunderbolt: Add support for ACPI _DSM to power on/off retimers

2021-06-01T07:53:31+00:00

Typically retimers can be accessed only when the USB4 link is up (e.g there is a cable connected). However, sometimes it is useful to be able to access retimers even if there is nothing connected to the USB4 port. For instance we may still want to be able to upgrade the retimer NVM firmware even if the user does not have any USB4 devices. This is something that USB4 spec leaves to implementers. In case of ACPI based systems, we can support this by providing a special _DSM method under each USB4 port. This _DSM can be used to turn on power to on-board retimers (and cycle it through different modes so that the sideband becomes usable). This patch adds support for this _DSM and makes the functionality available to the rest of the driver through tb_acpi_power_[on|off]_retimers(). Signed-off-by: Rajmohan Mani Co-developed-by: Mika Westerberg Signed-off-by: Mika Westerberg Reviewed-by: Greg Kroah-Hartman

thunderbolt: Unlock on error path in tb_domain_add()

2021-03-23T14:09:34+00:00

We accidentally deleted this unlock on the error path. Undelete it. Fixes: 7f0a34d7900b ("thunderbolt: Decrease control channel timeout for software connection manager") Signed-off-by: Dan Carpenter Signed-off-by: Mika Westerberg

thunderbolt: Allow multiple DMA tunnels over a single XDomain connection

2021-03-18T15:25:31+00:00

Currently we have had an artificial limitation of a single DMA tunnel per XDomain connection. However, hardware wise there is no such limit and software based connection manager can take advantage of all the DMA rings available on the host to establish tunnels. For this reason make the tb_xdomain_[enable|disable]_paths() to take the DMA ring and HopID as parameter instead of storing them in the struct tb_xdomain. We also add API functions to allocate input and output HopIDs of the XDomain connection that the service drivers can use instead of hard-coding. Also convert the two existing service drivers over to this API. Signed-off-by: Mika Westerberg

thunderbolt: Decrease control channel timeout for software connection manager

2021-03-18T15:25:30+00:00

When the firmware connection manager is not proxying between the software and the hardware we can decrease the timeout for control packets significantly. The USB4 spec recommends 10 ms +- 1 ms but we use slightly larger value (100 ms) which is recommendation from Intel Thunderbolt firmware folks. When firmware connection manager is running then we keep using the existing 5000 ms. To implement this we move the control channel allocation to tb_domain_alloc(), and pass the timeout from that function to the tb_ctl_alloc(). Then make both connection manager implementations pass the timeout when they alloc the domain structure. While there update kernel-doc of struct tb_ctl to match the reality. Signed-off-by: Mika Westerberg

thunderbolt: Allow disabling XDomain protocol

2021-02-04T07:45:25+00:00

This allows disabling XDomain protocol completely if the user does not plan to use the USB4/Thunderbolt peer-to-peer functionality, or for security reasons. XDomain protocol is enabled by default but with this commit it is possible to disable it by passing "xdomain=0" as module parameter (or through the kernel command line). Signed-off-by: Mika Westerberg Acked-by: Yehezkel Bernat

thunderbolt: Add support for PCIe tunneling disabled (SL5)

2021-02-04T07:45:24+00:00

Recent Intel Thunderbolt firmware connection manager has support for another security level, SL5, that disables PCIe tunneling. This option can be turned on from the BIOS. When this is set the driver exposes a new security level "nopcie" to the userspace and hides the authorized attribute under connected devices. While there we also hide it when "dponly" security level is enabled since it is not really usable in that case anyway. Signed-off-by: Mika Westerberg Acked-by: Yehezkel Bernat