kernel/linux.git/drivers/thunderbolt/Kconfig, branch linux-5.9.y

thunderbolt: Add KUnit tests for path walking

2020-06-22T16:58:20+00:00

This adds KUnit tests for path walking which is only dependent on software structures, so no hardware is needed to run these. We make these available only when both KUnit and the driver itself are built into the kernel image. The reason for this is that KUnit adds its own module_init() call in kunit_test_suite() which generates linker error because the driver does the same in nhi.c. This should be fine for now because these tests are only meant to run by developers anyway. Signed-off-by: Mika Westerberg

thunderbolt: Improve USB4 config symbol help text

2020-06-15T11:34:21+00:00

Fix the spelling of "specification", and add a missing "the" article. Signed-off-by: Geert Uytterhoeven Signed-off-by: Mika Westerberg

thunderbolt: Update Kconfig to allow building on other architectures.

2020-05-13T16:32:48+00:00

Thunderbolt 3 and USB4 shouldn't be x86 only. Tested on a SolidRun HoneyComb (ARM Cortex-A72) with a Gigabyte Titan Ridge Thunderbolt 3 PCIe card (JHL7540). Signed-off-by: David Manouchehri Signed-off-by: Mika Westerberg

thunderbolt: Update Kconfig entries to USB4

2019-12-18T14:39:18+00:00

Since the driver now supports USB4 which is the standard going forward, update the Kconfig entry to mention this and rename the entry from CONFIG_THUNDERBOLT to CONFIG_USB4 instead to help people to find the correct option if they want to enable USB4. Also do the same for Thunderbolt network driver. Signed-off-by: Mika Westerberg Cc: David S. Miller Link: https://lore.kernel.org/r/20191217123345.31850-6-mika.westerberg@linux.intel.com Signed-off-by: Greg Kroah-Hartman

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46+00:00

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

thunderbolt: Add support for host and device NVM firmware upgrade

2017-06-09T09:42:43+00:00

Starting from Intel Falcon Ridge the NVM firmware can be upgraded by using DMA configuration based mailbox commands. If we detect that the host or device (device support starts from Intel Alpine Ridge) has the DMA configuration based mailbox we expose NVM information to the userspace as two separate Linux NVMem devices: nvm_active and nvm_non_active. The former is read-only portion of the active NVM which firmware upgrade tools can be use to find out suitable NVM image if the device identification strings are not enough. The latter is write-only portion where the new NVM image is to be written by the userspace. It is up to the userspace to find out right NVM image (the kernel does very minimal validation). The ICM firmware itself authenticates the new NVM firmware and fails the operation if it is not what is expected. We also expose two new sysfs files per each switch: nvm_version and nvm_authenticate which can be used to read the active NVM version and start the upgrade process. We also introduce safe mode which is the mode a switch goes when it does not have properly authenticated firmware. In this mode the switch only accepts a couple of commands including flashing a new NVM firmware image and triggering power cycle. This code is based on the work done by Amir Levy and Michael Jamet. Signed-off-by: Michael Jamet Signed-off-by: Mika Westerberg Reviewed-by: Yehezkel Bernat Reviewed-by: Andy Shevchenko Signed-off-by: Andreas Noever Signed-off-by: Greg Kroah-Hartman

thunderbolt: Add support for Internal Connection Manager (ICM)

2017-06-09T09:42:43+00:00

Starting from Intel Falcon Ridge the internal connection manager running on the Thunderbolt host controller has been supporting 4 security levels. One reason for this is to prevent DMA attacks and only allow connecting devices the user trusts. The internal connection manager (ICM) is the preferred way of connecting Thunderbolt devices over software only implementation typically used on Macs. The driver communicates with ICM using special Thunderbolt ring 0 (control channel) messages. In order to handle these messages we add support for the ICM messages to the control channel. The security levels are as follows: none - No security, all tunnels are created automatically user - User needs to approve the device before tunnels are created secure - User need to approve the device before tunnels are created. The device is sent a challenge on future connects to be able to verify it is actually the approved device. dponly - Only Display Port and USB tunnels can be created and those are created automatically. The security levels are typically configurable from the system BIOS and by default it is set to "user" on many systems. In this patch each Thunderbolt device will have either one or two new sysfs attributes: authorized and key. The latter appears for devices that support secure connect. In order to identify the device the user can read identication information, including UUID and name of the device from sysfs and based on that make a decision to authorize the device. The device is authorized by simply writing 1 to the "authorized" sysfs attribute. This is following the USB bus device authorization mechanism. The secure connect requires an additional challenge step (writing 2 to the "authorized" attribute) in future connects when the key has already been stored to the NVM of the device. Non-ICM systems (before Alpine Ridge) continue to use the existing functionality and the security level is set to none. For systems with Alpine Ridge, even on Apple hardware, we will use ICM. This code is based on the work done by Amir Levy and Michael Jamet. Signed-off-by: Michael Jamet Signed-off-by: Mika Westerberg Reviewed-by: Yehezkel Bernat Reviewed-by: Andy Shevchenko Signed-off-by: Andreas Noever Signed-off-by: Greg Kroah-Hartman

thunderbolt: Compile on x86 only

2016-11-18T08:42:59+00:00

So far Thunderbolt is (unfortunately) an Intel proprietary technology that is only available on x86, so compiling on other arches is pointless except for testing purposes. Amend Kconfig accordingly. Suggested-by: Arnd Bergmann Signed-off-by: Lukas Wunner Acked-by: Arnd Bergmann Cc: Andreas Noever Cc: Ard Biesheuvel Cc: Linus Torvalds Cc: Matt Fleming Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/7dfda728d3ee8a33c80c49b224da7359c6015eea.1479456179.git.lukas@wunner.de Signed-off-by: Ingo Molnar

thunderbolt, efi: Fix Kconfig dependencies harder

2016-11-18T08:42:53+00:00

Since commit c9cc3aaa0281 ("thunderbolt: Use Device ROM retrieved from EFI"), the THUNDERBOLT config option selects APPLE_PROPERTIES. This broke the build for certain configs because APPLE_PROPERTIES is located in a menu which depends on EFI: If EFI is not enabled, the prerequisites needed for APPLE_PROPERTIES are not selected: Those are EFI_DEV_PATH_PARSER and UCS2_STRING. Additionally EFI_DEV_PATH_PARSER won't compile unless ACPI is enabled. Commit 79f9cd35b05e ("thunderbolt, efi: Fix Kconfig dependencies") sought to fix the breakage by making THUNDERBOLT select APPLE_PROPERTIES only if EFI_STUB is enabled. On x86, EFI_STUB depends on EFI and EFI depends on ACPI, so this fixed the build at least on this architecture. However on arm and arm64, EFI_STUB does not depend on EFI, so once again the prerequisites needed for APPLE_PROPERTIES are not selected. Additionally ACPI is not available on arm and optional on arm64, therefore EFI_DEV_PATH_PARSER won't compile. Fix by selecting APPLE_PROPERTIES only on x86. Suggested-by: Arnd Bergmann Signed-off-by: Lukas Wunner Acked-by: Arnd Bergmann Cc: Andreas Noever Cc: Ard Biesheuvel Cc: Linus Torvalds Cc: Matt Fleming Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/5c241cf92eb1dc2421218c1204c6a9d22c9f847b.1479456179.git.lukas@wunner.de Signed-off-by: Ingo Molnar

thunderbolt, efi: Fix Kconfig dependencies

2016-11-15T07:33:22+00:00

Fix this EFI build failure on certain (rand)configs: drivers/firmware/efi/apple-properties.c:149:9: error: implicit declaration of function ???efi_get_device_by_path??? [-Werror=implicit-function-declaration] which is due to: warning: (THUNDERBOLT) selects APPLE_PROPERTIES which has unmet direct dependencies (EFI && EFI_STUB && X86) Signed-off-by: Lukas Wunner Cc: Andreas Noever Cc: Ard Biesheuvel Cc: Linus Torvalds Cc: Matt Fleming Cc: Pedro Vilaça Cc: Peter Jones Cc: Peter Zijlstra Cc: Pierre Moreau [MacBookPro11,3] Cc: Thomas Gleixner Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20161114151033.GA10141@wunner.de Signed-off-by: Ingo Molnar