kernel/linux.git/drivers/thermal, branch v5.4.50

thermal/drivers/ti-soc-thermal: Avoid dereferencing ERR_PTR

2020-06-24T15:50:23+00:00

[ Upstream commit 7440f518dad9d861d76c64956641eeddd3586f75 ] On error the function ti_bandgap_get_sensor_data() returns the error code in ERR_PTR() but we only checked if the return value is NULL or not. And, so we can dereference an error code inside ERR_PTR. While at it, convert a check to IS_ERR_OR_NULL. Signed-off-by: Sudip Mukherjee Reviewed-by: Amit Kucheria Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20200424161944.6044-1-sudipm.mukherjee@gmail.com Signed-off-by: Sasha Levin

thermal: brcmstb_thermal: Do not use DT coefficients

2020-03-05T15:43:50+00:00

commit e1ff6fc22f19e2af8adbad618526b80067911d40 upstream. At the time the brcmstb_thermal driver and its binding were merged, the DT binding did not make the coefficients properties a mandatory one, therefore all users of the brcmstb_thermal driver out there have a non functional implementation with zero coefficients. Even if these properties were provided, the formula used for computation is incorrect. The coefficients are entirely process specific (right now, only 28nm is supported) and not board or SoC specific, it is therefore appropriate to hard code them in the driver given the compatibility string we are probed with which has to be updated whenever a new process is introduced. We remove the existing coefficients definition since subsequent patches are going to add support for a new process and will introduce new coefficients as well. Fixes: 9e03cf1b2dd5 ("thermal: add brcmstb AVS TMON driver") Signed-off-by: Florian Fainelli Reviewed-by: Amit Kucheria Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20200114190607.29339-2-f.fainelli@gmail.com Signed-off-by: Greg Kroah-Hartman

thermal: db8500: Depromote debug print

2020-03-05T15:43:50+00:00

commit c56dcfa3d4d0f49f0c37cd24886aa86db7aa7f30 upstream. We are not interested in getting this debug print on our console all the time. Cc: Daniel Lezcano Cc: Stephan Gerhold Fixes: 6c375eccded4 ("thermal: db8500: Rewrite to be a pure OF sensor") Signed-off-by: Linus Walleij Reviewed-by: Stephan Gerhold Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20191119074650.2664-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman

thermal: Fix deadlock in thermal thermal_zone_device_check

2019-12-13T07:43:21+00:00

commit 163b00cde7cf2206e248789d2780121ad5e6a70b upstream. 1851799e1d29 ("thermal: Fix use-after-free when unregistering thermal zone device") changed cancel_delayed_work to cancel_delayed_work_sync to avoid a use-after-free issue. However, cancel_delayed_work_sync could be called insides the WQ causing deadlock. [54109.642398] c0 1162 kworker/u17:1 D 0 11030 2 0x00000000 [54109.642437] c0 1162 Workqueue: thermal_passive_wq thermal_zone_device_check [54109.642447] c0 1162 Call trace: [54109.642456] c0 1162 __switch_to+0x138/0x158 [54109.642467] c0 1162 __schedule+0xba4/0x1434 [54109.642480] c0 1162 schedule_timeout+0xa0/0xb28 [54109.642492] c0 1162 wait_for_common+0x138/0x2e8 [54109.642511] c0 1162 flush_work+0x348/0x40c [54109.642522] c0 1162 __cancel_work_timer+0x180/0x218 [54109.642544] c0 1162 handle_thermal_trip+0x2c4/0x5a4 [54109.642553] c0 1162 thermal_zone_device_update+0x1b4/0x25c [54109.642563] c0 1162 thermal_zone_device_check+0x18/0x24 [54109.642574] c0 1162 process_one_work+0x3cc/0x69c [54109.642583] c0 1162 worker_thread+0x49c/0x7c0 [54109.642593] c0 1162 kthread+0x17c/0x1b0 [54109.642602] c0 1162 ret_from_fork+0x10/0x18 [54109.643051] c0 1162 kworker/u17:2 D 0 16245 2 0x00000000 [54109.643067] c0 1162 Workqueue: thermal_passive_wq thermal_zone_device_check [54109.643077] c0 1162 Call trace: [54109.643085] c0 1162 __switch_to+0x138/0x158 [54109.643095] c0 1162 __schedule+0xba4/0x1434 [54109.643104] c0 1162 schedule_timeout+0xa0/0xb28 [54109.643114] c0 1162 wait_for_common+0x138/0x2e8 [54109.643122] c0 1162 flush_work+0x348/0x40c [54109.643131] c0 1162 __cancel_work_timer+0x180/0x218 [54109.643141] c0 1162 handle_thermal_trip+0x2c4/0x5a4 [54109.643150] c0 1162 thermal_zone_device_update+0x1b4/0x25c [54109.643159] c0 1162 thermal_zone_device_check+0x18/0x24 [54109.643167] c0 1162 process_one_work+0x3cc/0x69c [54109.643177] c0 1162 worker_thread+0x49c/0x7c0 [54109.643186] c0 1162 kthread+0x17c/0x1b0 [54109.643195] c0 1162 ret_from_fork+0x10/0x18 [54109.644500] c0 1162 cat D 0 7766 1 0x00000001 [54109.644515] c0 1162 Call trace: [54109.644524] c0 1162 __switch_to+0x138/0x158 [54109.644536] c0 1162 __schedule+0xba4/0x1434 [54109.644546] c0 1162 schedule_preempt_disabled+0x80/0xb0 [54109.644555] c0 1162 __mutex_lock+0x3a8/0x7f0 [54109.644563] c0 1162 __mutex_lock_slowpath+0x14/0x20 [54109.644575] c0 1162 thermal_zone_get_temp+0x84/0x360 [54109.644586] c0 1162 temp_show+0x30/0x78 [54109.644609] c0 1162 dev_attr_show+0x5c/0xf0 [54109.644628] c0 1162 sysfs_kf_seq_show+0xcc/0x1a4 [54109.644636] c0 1162 kernfs_seq_show+0x48/0x88 [54109.644656] c0 1162 seq_read+0x1f4/0x73c [54109.644664] c0 1162 kernfs_fop_read+0x84/0x318 [54109.644683] c0 1162 __vfs_read+0x50/0x1bc [54109.644692] c0 1162 vfs_read+0xa4/0x140 [54109.644701] c0 1162 SyS_read+0xbc/0x144 [54109.644708] c0 1162 el0_svc_naked+0x34/0x38 [54109.845800] c0 1162 D 720.000s 1->7766->7766 cat [panic] Fixes: 1851799e1d29 ("thermal: Fix use-after-free when unregistering thermal zone device") Cc: stable@vger.kernel.org Signed-off-by: Wei Wang Signed-off-by: Zhang Rui Signed-off-by: Greg Kroah-Hartman

cpufreq: Use per-policy frequency QoS

2019-10-21T00:05:21+00:00

Replace the CPU device PM QoS used for the management of min and max frequency constraints in cpufreq (and its users) with per-policy frequency QoS to avoid problems with cpufreq policies covering more then one CPU. Namely, a cpufreq driver is registered with the subsys interface which calls cpufreq_add_dev() for each CPU, starting from CPU0, so currently the PM QoS notifiers are added to the first CPU in the policy (i.e. CPU0 in the majority of cases). In turn, when the cpufreq driver is unregistered, the subsys interface doing that calls cpufreq_remove_dev() for each CPU, starting from CPU0, and the PM QoS notifiers are only removed when cpufreq_remove_dev() is called for the last CPU in the policy, say CPUx, which as a rule is not CPU0 if the policy covers more than one CPU. Then, the PM QoS notifiers cannot be removed, because CPUx does not have them, and they are still there in the device PM QoS notifiers list of CPU0, which prevents new PM QoS notifiers from being registered for CPU0 on the next attempt to register the cpufreq driver. The same issue occurs when the first CPU in the policy goes offline before unregistering the driver. After this change it does not matter which CPU is the policy CPU at the driver registration time and whether or not it is online all the time, because the frequency QoS is per policy and not per CPU. Fixes: 67d874c3b2c6 ("cpufreq: Register notifiers with the PM QoS framework") Reported-by: Dmitry Osipenko Tested-by: Dmitry Osipenko Reported-by: Sudeep Holla Tested-by: Sudeep Holla Diagnosed-by: Viresh Kumar Link: https://lore.kernel.org/linux-pm/5ad2624194baa2f53acc1f1e627eb7684c577a19.1562210705.git.viresh.kumar@linaro.org/T/#md2d89e95906b8c91c15f582146173dce2e86e99f Link: https://lore.kernel.org/linux-pm/20191017094612.6tbkwoq4harsjcqv@vireshk-i7/T/#m30d48cc23b9a80467fbaa16e30f90b3828a5a29b Signed-off-by: Rafael J. Wysocki Acked-by: Viresh Kumar

Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal

2019-09-29T17:24:23+00:00

Pull thermal SoC updates from Eduardo Valentin: "This is a really small pull in the midst of a lot of pending patches. We are in the middle of restructuring how we are maintaining the thermal subsystem, as per discussion in our last LPC. For now, I am sending just some changes that were pending in my tree. Looking forward to get a more streamlined process in the next merge window" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: thermal: db8500: Rewrite to be a pure OF sensor thermal: db8500: Use dev helper variable thermal: db8500: Finalize device tree conversion thermal: thermal_mmio: remove some dead code

Merge branch 'for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux

2019-09-27T18:35:13+00:00

Pull thermal management updates from Zhang Rui: - Add Amit Kucheria as thermal subsystem Reviewer (Amit Kucheria) - Fix a use after free bug when unregistering thermal zone devices (Ido Schimmel) - Fix thermal core framework to use put_device() when device_register() fails (Yue Hu) - Enable intel_pch_thermal and MMIO RAPL support for Intel Icelake platform (Srinivas Pandruvada) - Add clock operations in qorip thermal driver, for some platforms with clock control like i.MX8MQ (Anson Huang) - A couple of trivial fixes and cleanups for thermal core and different soc thermal drivers (Amit Kucheria, Christophe JAILLET, Chuhong Yuan, Fuqian Huang, Kelsey Skunberg, Nathan Huckleberry, Rishi Gupta, Srinivas Kandagatla) * 'for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: MAINTAINERS: Add Amit Kucheria as reviewer for thermal thermal: Add some error messages thermal: Fix use-after-free when unregistering thermal zone device thermal/drivers/core: Use put_device() if device_register() fails thermal_hwmon: Sanitize thermal_zone type thermal: intel: Use dev_get_drvdata thermal: intel: int3403: replace printk(KERN_WARN...) with pr_warn(...) thermal: intel: int340x_thermal: Remove unnecessary acpi_has_method() uses thermal: int340x: processor_thermal: Add Ice Lake support drivers: thermal: qcom: tsens: Fix memory leak from qfprom read thermal: tegra: Fix a typo thermal: rcar_gen3_thermal: Replace devm_add_action() followed by failure action with devm_add_action_or_reset() thermal: armada: Fix -Wshift-negative-value dt-bindings: thermal: qoriq: Add optional clocks property thermal: qoriq: Use __maybe_unused instead of #if CONFIG_PM_SLEEP thermal: qoriq: Use devm_platform_ioremap_resource() instead of of_iomap() thermal: qoriq: Fix error path of calling qoriq_tmu_register_tmu_zone fail thermal: qoriq: Add clock operations drivers: thermal: processor_thermal_device: Export sysfs interface for TCC offset

thermal: db8500: Rewrite to be a pure OF sensor

2019-09-25T05:59:22+00:00

This patch rewrites the DB8500 thermal sensor to be a pure OF sensor, so that it can be used with thermal zones defined in the device tree. This driver was initially merged before we had generic thermal zone device tree bindings, and now it gets modernized to the way we do things these days. The old driver depended on a set of trigger points provided in the device tree or platform data to interpolate the current temperature between trigger points depending on whether the trend was rising or falling. This was bad because the trigger points should be used for defining temperature zone policies and bind to cooling devices. As the PRCMU (power reset control management unit) can only issue IRQs when we pass temperature trigger points upward or downward We instead define a number of temperature points inside the driver ranging from 15 to 100 degrees celsius. The effect is that when we register the device we quickly trigger 15, 20 ... up to the room temperature in succession and then we get continous event IRQs also under normal operating conditions, and the temperature of the system is now reported more accurately (+/- 2.5 degrees celsius) while in the past the first trigger point was at 70 degrees and the average temperature was simply reported as 35 degrees celsius (between 70 degrees and 0) until we passed 70 degrees which didn't accurately represent the temperature of the system. As a result of dropping all the trigger points from the driver and reusing the core DT thermal zone management code we reduce the code footprint quite a bit. Cc: Vincent Guittot Suggested-by: Daniel Lezcano Signed-off-by: Linus Walleij Reviewed-by: Daniel Lezcano Signed-off-by: Eduardo Valentin

thermal: db8500: Use dev helper variable

2019-09-25T05:58:46+00:00

The code gets easier to read like this. Cc: Vincent Guittot Reviewed-by: Daniel Lezcano Signed-off-by: Linus Walleij Signed-off-by: Eduardo Valentin

thermal: db8500: Finalize device tree conversion

2019-09-25T05:54:49+00:00

At some point there was an attempt to convert the DB8500 thermal sensor to device tree: a probe path was added and the device tree was augmented for the Snowball board. The switchover was never completed: instead the thermal devices came from from the PRCMU MFD device and the probe on the Snowball was confused as another set of configuration appeared from the device tree. Move over to a device-tree only approach, as we fixed up the device trees. Cc: Vincent Guittot Acked-by: Lee Jones Reviewed-by: Daniel Lezcano Signed-off-by: Linus Walleij Signed-off-by: Eduardo Valentin