kernel/linux.git/drivers/thermal, branch v4.4.171

thermal: allow u8500-thermal driver to be a module

2018-11-10T15:41:36+00:00

[ Upstream commit 26716ce124fce88f288f07738ef685d5dfe5c13f ] When the thermal subsystem is a loadable module, the u8500 driver fails to build: drivers/thermal/built-in.o: In function `db8500_thermal_probe': db8500_thermal.c:(.text+0x96c): undefined reference to `thermal_zone_device_register' drivers/thermal/built-in.o: In function `db8500_thermal_work': db8500_thermal.c:(.text+0xab4): undefined reference to `thermal_zone_device_update' This changes the symbol to a tristate, so Kconfig can track the dependency correctly. Signed-off-by: Arnd Bergmann Signed-off-by: Eduardo Valentin Signed-off-by: Sasha Levin

thermal: allow spear-thermal driver to be a module

2018-11-10T15:41:36+00:00

[ Upstream commit 4d2f1794c07aae55b8f25f4d8aebcafc0d3e501d ] When the thermal subsystem is a loadable module, the spear driver fails to build: drivers/thermal/built-in.o: In function `spear_thermal_exit': spear_thermal.c:(.text+0xf8): undefined reference to `thermal_zone_device_unregister' drivers/thermal/built-in.o: In function `spear_thermal_probe': spear_thermal.c:(.text+0x230): undefined reference to `thermal_zone_device_register' This changes the symbol to a tristate, so Kconfig can track the dependency correctly. Signed-off-by: Arnd Bergmann Signed-off-by: Eduardo Valentin Signed-off-by: Sasha Levin

thermal: of-thermal: disable passive polling when thermal zone is disabled

2018-10-10T06:52:08+00:00

[ Upstream commit 152395fd03d4ce1e535a75cdbf58105e50587611 ] When thermal zone is in passive mode, disabling its mode from sysfs is NOT taking effect at all, it is still polling the temperature of the disabled thermal zone and handling all thermal trips, it makes user confused. The disabling operation should disable the thermal zone behavior completely, for both active and passive mode, this patch clears the passive_delay when thermal zone is disabled and restores it when it is enabled. Signed-off-by: Anson Huang Signed-off-by: Eduardo Valentin Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

thermal: exynos: fix setting rising_threshold for Exynos5433

2018-08-06T14:24:37+00:00

[ Upstream commit 8bfc218d0ebbabcba8ed2b8ec1831e0cf1f71629 ] Add missing clearing of the previous value when setting rising temperature threshold. Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Eduardo Valentin Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

thermal: imx: Fix race condition in imx_thermal_probe()

2018-04-24T07:32:08+00:00

commit cf1ba1d73a33944d8c1a75370a35434bf146b8a7 upstream. When device boots with T > T_trip_1 and requests interrupt, the race condition takes place. The interrupt comes before THERMAL_DEVICE_ENABLED is set. This leads to an attempt to reading sensor value from irq and disabling the sensor, based on the data->mode field, which expected to be THERMAL_DEVICE_ENABLED, but still stays as THERMAL_DEVICE_DISABLED. Afher this issue sensor is never re-enabled, as the driver state is wrong. Fix this problem by setting the 'data' members prior to requesting the interrupts. Fixes: 37713a1e8e4c ("thermal: imx: implement thermal alarm interrupt handling") Cc: Signed-off-by: Mikhail Lappo Signed-off-by: Fabio Estevam Reviewed-by: Philipp Zabel Acked-by: Dong Aisheng Signed-off-by: Zhang Rui Signed-off-by: Greg Kroah-Hartman

thermal: power_allocator: fix one race condition issue for thermal_instances list

2018-04-13T17:50:12+00:00

[ Upstream commit a5de11d67dcd268b8d0beb73dc374de5e97f0caf ] When invoking allow_maximum_power and traverse tz->thermal_instances, we should grab thermal_zone_device->lock to avoid race condition. For example, during the system reboot, if the mali GPU device implements device shutdown callback and unregister GPU devfreq cooling device, the deleted list head may be accessed to cause panic, as the following log shows: [ 33.551070] c3 25 (kworker/3:0) Unable to handle kernel paging request at virtual address dead000000000070 [ 33.566708] c3 25 (kworker/3:0) pgd = ffffffc0ed290000 [ 33.572071] c3 25 (kworker/3:0) [dead000000000070] *pgd=00000001ed292003, *pud=00000001ed292003, *pmd=0000000000000000 [ 33.581515] c3 25 (kworker/3:0) Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 33.599761] c3 25 (kworker/3:0) CPU: 3 PID: 25 Comm: kworker/3:0 Not tainted 4.4.35+ #912 [ 33.614137] c3 25 (kworker/3:0) Workqueue: events_freezable thermal_zone_device_check [ 33.620245] c3 25 (kworker/3:0) task: ffffffc0f32e4200 ti: ffffffc0f32f0000 task.ti: ffffffc0f32f0000 [ 33.629466] c3 25 (kworker/3:0) PC is at power_allocator_throttle+0x7c8/0x8a4 [ 33.636609] c3 25 (kworker/3:0) LR is at power_allocator_throttle+0x808/0x8a4 [ 33.643742] c3 25 (kworker/3:0) pc : [] lr : [] pstate: 20000145 [ 33.652874] c3 25 (kworker/3:0) sp : ffffffc0f32f3bb0 [ 34.468519] c3 25 (kworker/3:0) Process kworker/3:0 (pid: 25, stack limit = 0xffffffc0f32f0020) [ 34.477220] c3 25 (kworker/3:0) Stack: (0xffffffc0f32f3bb0 to 0xffffffc0f32f4000) [ 34.819822] c3 25 (kworker/3:0) Call trace: [ 34.824021] c3 25 (kworker/3:0) Exception stack(0xffffffc0f32f39c0 to 0xffffffc0f32f3af0) [ 34.924993] c3 25 (kworker/3:0) [] power_allocator_throttle+0x7c8/0x8a4 [ 34.933184] c3 25 (kworker/3:0) [] handle_thermal_trip.part.25+0x70/0x224 [ 34.941545] c3 25 (kworker/3:0) [] thermal_zone_device_update+0xc0/0x20c [ 34.949818] c3 25 (kworker/3:0) [] thermal_zone_device_check+0x20/0x2c [ 34.957924] c3 25 (kworker/3:0) [] process_one_work+0x168/0x458 [ 34.965414] c3 25 (kworker/3:0) [] worker_thread+0x13c/0x4b4 [ 34.972650] c3 25 (kworker/3:0) [] kthread+0xe8/0xfc [ 34.979187] c3 25 (kworker/3:0) [] ret_from_fork+0x10/0x40 [ 34.986244] c3 25 (kworker/3:0) Code: f9405e73 eb1302bf d102e273 54ffc460 (b9402a61) [ 34.994339] c3 25 (kworker/3:0) ---[ end trace 32057901e3b7e1db ]--- Signed-off-by: Yi Zeng Signed-off-by: Zhang Rui Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

thermal: spear: use __maybe_unused for PM functions

2018-02-25T10:03:44+00:00

commit d612c64d1f4d6b2464993dfeafd9ec319f774188 upstream. The spear thermal driver hides its suspend/resume function conditionally based on CONFIG_PM, but references them based on CONFIG_PM_SLEEP, so we get a warning if the former is set but the latter is not: thermal/spear_thermal.c:58:12: warning: 'spear_thermal_suspend' defined but not used [-Wunused-function] thermal/spear_thermal.c:75:12: warning: 'spear_thermal_resume' defined but not used [-Wunused-function] This removes the #ifdef and instead uses a __maybe_uninitialized annotation to avoid the warning and improve compile-time coverage. Signed-off-by: Arnd Bergmann Signed-off-by: Eduardo Valentin Signed-off-by: Greg Kroah-Hartman

thermal: fix INTEL_SOC_DTS_IOSF_CORE dependencies

2018-02-25T10:03:43+00:00

commit 68fd77cf8a4b045594231f07e5fc92e1a34c0a9e upstream. We get a Kconfig warning when selecting this without also enabling CONFIG_PCI: warning: (X86_INTEL_LPSS && INTEL_SOC_DTS_IOSF_CORE && SND_SST_IPC_ACPI && MMC_SDHCI_ACPI && PUNIT_ATOM_DEBUG) selects IOSF_MBI which has unmet direct dependencies (PCI) This adds a new depedency. Fixes: 3a2419f865a6 ("Thermal: Intel SoC: DTS thermal use common APIs") Signed-off-by: Arnd Bergmann Reviewed-by: Srinivas Pandruvada Signed-off-by: Zhang Rui Signed-off-by: Greg Kroah-Hartman

thermal: hisilicon: Handle return value of clk_prepare_enable

2017-12-25T13:22:15+00:00

commit 919054fdfc8adf58c5512fe9872eb53ea0f5525d upstream. clk_prepare_enable() can fail here and we must check its return value. Signed-off-by: Arvind Yadav Signed-off-by: Eduardo Valentin Signed-off-by: Kevin Wangtao Signed-off-by: Greg Kroah-Hartman

thermal/drivers/step_wise: Fix temperature regulation misbehavior

2017-12-20T09:04:59+00:00

[ Upstream commit 07209fcf33542c1ff1e29df2dbdf8f29cdaacb10 ] There is a particular situation when the cooling device is cpufreq and the heat dissipation is not efficient enough where the temperature increases little by little until reaching the critical threshold and leading to a SoC reset. The behavior is reproducible on a hikey6220 with bad heat dissipation (eg. stacked with other boards). Running a simple C program doing while(1); for each CPU of the SoC makes the temperature to reach the passive regulation trip point and ends up to the maximum allowed temperature followed by a reset. This issue has been also reported by running the libhugetlbfs test suite. What is observed is a ping pong between two cpu frequencies, 1.2GHz and 900MHz while the temperature continues to grow. It appears the step wise governor calls get_target_state() the first time with the throttle set to true and the trend to 'raising'. The code selects logically the next state, so the cpu frequency decreases from 1.2GHz to 900MHz, so far so good. The temperature decreases immediately but still stays greater than the trip point, then get_target_state() is called again, this time with the throttle set to true *and* the trend to 'dropping'. From there the algorithm assumes we have to step down the state and the cpu frequency jumps back to 1.2GHz. But the temperature is still higher than the trip point, so get_target_state() is called with throttle=1 and trend='raising' again, we jump to 900MHz, then get_target_state() is called with throttle=1 and trend='dropping', we jump to 1.2GHz, etc ... but the temperature does not stabilizes and continues to increase. [ 237.922654] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=1,throttle=1 [ 237.922678] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=1,throttle=1 [ 237.922690] thermal cooling_device0: cur_state=0 [ 237.922701] thermal cooling_device0: old_target=0, target=1 [ 238.026656] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=2,throttle=1 [ 238.026680] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=2,throttle=1 [ 238.026694] thermal cooling_device0: cur_state=1 [ 238.026707] thermal cooling_device0: old_target=1, target=0 [ 238.134647] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=1,throttle=1 [ 238.134667] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=1,throttle=1 [ 238.134679] thermal cooling_device0: cur_state=0 [ 238.134690] thermal cooling_device0: old_target=0, target=1 In this situation the temperature continues to increase while the trend is oscillating between 'dropping' and 'raising'. We need to keep the current state untouched if the throttle is set, so the temperature can decrease or a higher state could be selected, thus preventing this oscillation. Keeping the next_target untouched when 'throttle' is true at 'dropping' time fixes the issue. The following traces show the governor does not change the next state if trend==2 (dropping) and throttle==1. [ 2306.127987] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=1,throttle=1 [ 2306.128009] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=1,throttle=1 [ 2306.128021] thermal cooling_device0: cur_state=0 [ 2306.128031] thermal cooling_device0: old_target=0, target=1 [ 2306.231991] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=2,throttle=1 [ 2306.232016] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=2,throttle=1 [ 2306.232030] thermal cooling_device0: cur_state=1 [ 2306.232042] thermal cooling_device0: old_target=1, target=1 [ 2306.335982] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=0,throttle=1 [ 2306.336006] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=0,throttle=1 [ 2306.336021] thermal cooling_device0: cur_state=1 [ 2306.336034] thermal cooling_device0: old_target=1, target=1 [ 2306.439984] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=2,throttle=1 [ 2306.440008] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=2,throttle=0 [ 2306.440022] thermal cooling_device0: cur_state=1 [ 2306.440034] thermal cooling_device0: old_target=1, target=0 [ ... ] After a while, if the temperature continues to increase, the next state becomes 2 which is 720MHz on the hikey. That results in the temperature stabilizing around the trip point. [ 2455.831982] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=1,throttle=1 [ 2455.832006] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=1,throttle=0 [ 2455.832019] thermal cooling_device0: cur_state=1 [ 2455.832032] thermal cooling_device0: old_target=1, target=1 [ 2455.935985] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=0,throttle=1 [ 2455.936013] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=0,throttle=0 [ 2455.936027] thermal cooling_device0: cur_state=1 [ 2455.936040] thermal cooling_device0: old_target=1, target=1 [ 2456.043984] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=0,throttle=1 [ 2456.044009] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=0,throttle=0 [ 2456.044023] thermal cooling_device0: cur_state=1 [ 2456.044036] thermal cooling_device0: old_target=1, target=1 [ 2456.148001] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=1,throttle=1 [ 2456.148028] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=1,throttle=1 [ 2456.148042] thermal cooling_device0: cur_state=1 [ 2456.148055] thermal cooling_device0: old_target=1, target=2 [ 2456.252009] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=2,throttle=1 [ 2456.252041] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=2,throttle=0 [ 2456.252058] thermal cooling_device0: cur_state=2 [ 2456.252075] thermal cooling_device0: old_target=2, target=1 IOW, this change is needed to keep the state for a cooling device if the temperature trend is oscillating while the temperature increases slightly. Without this change, the situation above leads to a catastrophic crash by a hardware reset on hikey. This issue has been reported to happen on an OMAP dra7xx also. Signed-off-by: Daniel Lezcano Cc: Keerthy Cc: John Stultz Cc: Leo Yan Tested-by: Keerthy Reviewed-by: Keerthy Signed-off-by: Eduardo Valentin Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman