kernel/linux.git/drivers/thermal, branch v4.19.39

thermal/intel_powerclamp: fix truncated kthread name

2019-04-20T07:15:56+00:00

[ Upstream commit e925b5be5751f6a7286bbd9a4cbbc4ac90cc5fa6 ] kthread name only allows 15 characters (TASK_COMMON_LEN is 16). Thus rename the kthreads created by intel_powerclamp driver from "kidle_inject/ + decimal cpuid" to "kidle_inj/ + decimal cpuid" to avoid truncated kthead name for cpu 100 and later. Signed-off-by: Zhang Rui Signed-off-by: Sasha Levin

thermal/int340x_thermal: fix mode setting

2019-04-20T07:15:56+00:00

[ Upstream commit 396ee4d0cd52c13b3f6421b8d324d65da5e7e409 ] int3400 only pushes the UUID into the firmware when the mode is flipped to "enable". The current code only exposes the mode flag if the firmware supports the PASSIVE_1 UUID, which not all machines do. Remove the restriction. Signed-off-by: Matthew Garrett Signed-off-by: Zhang Rui Signed-off-by: Sasha Levin

thermal/int340x_thermal: Add additional UUIDs

2019-04-20T07:15:56+00:00

[ Upstream commit 16fc8eca1975358111dbd7ce65e4ce42d1a848fb ] Add more supported DPTF policies than the driver currently exposes. Signed-off-by: Matthew Garrett Cc: Nisha Aram Signed-off-by: Zhang Rui Signed-off-by: Sasha Levin

thermal: bcm2835: Fix crash in bcm2835_thermal_debugfs

2019-04-20T07:15:56+00:00

[ Upstream commit 35122495a8c6683e863acf7b05a7036b2be64c7a ] "cat /sys/kernel/debug/bcm2835_thermal/regset" causes a NULL pointer dereference in bcm2835_thermal_debugfs. The driver makes use of the implementation details of the thermal framework to retrieve a pointer to its private data from a struct thermal_zone_device, and gets it wrong - leading to the crash. Instead, store its private data as the drvdata and retrieve the thermal_zone_device pointer from it. Fixes: bcb7dd9ef206 ("thermal: bcm2835: add thermal driver for bcm2835 SoC") Signed-off-by: Phil Elwell Signed-off-by: Zhang Rui Signed-off-by: Sasha Levin

thermal: samsung: Fix incorrect check after code merge

2019-04-20T07:15:56+00:00

[ Upstream commit 3b5236cc5d086dd3ddd01113ee9255421aab9fab ] Merge commit 19785cf93b6c ("Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal") broke the code introduced by commit ffe6e16f14fa ("thermal: exynos: Reduce severity of too early temperature read"). Restore the original code from the mentioned commit to finally fix the warning message during boot: thermal thermal_zone0: failed to read out thermal zone (-22) Reported-by: Marian Mihailescu Signed-off-by: Marek Szyprowski Fixes: 19785cf93b6c ("Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal") Reviewed-by: Krzysztof Kozlowski Signed-off-by: Zhang Rui Signed-off-by: Sasha Levin

thermal/intel_powerclamp: fix __percpu declaration of worker_data

2019-04-20T07:15:56+00:00

[ Upstream commit aa36e3616532f82a920b5ebf4e059fbafae63d88 ] This variable is declared as: static struct powerclamp_worker_data * __percpu worker_data; In other words, a percpu pointer to struct ... But this variable not used like so but as a pointer to a percpu struct powerclamp_worker_data. So fix the declaration as: static struct powerclamp_worker_data __percpu *worker_data; This also quiets Sparse's warnings from __verify_pcpu_ptr(), like: 494:49: warning: incorrect type in initializer (different address spaces) 494:49: expected void const [noderef] *__vpp_verify 494:49: got struct powerclamp_worker_data * Signed-off-by: Luc Van Oostenryck Reviewed-by: Petr Mladek Signed-off-by: Zhang Rui Signed-off-by: Sasha Levin

drivers: thermal: int340x_thermal: Fix sysfs race condition

2019-03-05T16:58:48+00:00

[ Upstream commit 129699bb8c7572106b5bbb2407c2daee4727ccad ] Changes since V1: * Use dev_info instead of printk * Use dev_warn instead of BUG_ON Previously, sysfs_create_group was called before all initialization had fully run - specifically, before pci_set_drvdata was called. Since the sysctl group is visible to userspace as soon as sysfs_create_group returns, a small window of time existed during which a process could read from an uninitialized/partially-initialized device. This commit moves the creation of the sysctl group to after all initialized is completed. This ensures that it's impossible for userspace to read from a sysctl file before initialization has fully completed. To catch any future regressions, I've added a check to ensure that proc_thermal_emum_mode is never PROC_THERMAL_NONE when a process tries to read from a sysctl file. Previously, the aforementioned race condition could result in the 'else' branch running while PROC_THERMAL_NONE was set, leading to a null pointer deference. Signed-off-by: Aaron Hill Signed-off-by: Zhang Rui Signed-off-by: Sasha Levin

thermal: int340x_thermal: Fix a NULL vs IS_ERR() check

2019-03-05T16:58:46+00:00

[ Upstream commit 3fe931b31a4078395c1967f0495dcc9e5ec6b5e3 ] The intel_soc_dts_iosf_init() function doesn't return NULL, it returns error pointers. Fixes: 4d0dd6c1576b ("Thermal/int340x/processor_thermal: Enable auxiliary DTS for Braswell") Signed-off-by: Dan Carpenter Signed-off-by: Zhang Rui Signed-off-by: Sasha Levin

thermal: hwmon: inline helpers when CONFIG_THERMAL_HWMON is not set

2019-02-12T18:47:21+00:00

commit 03334ba8b425b2ad275c8f390cf83c7b081c3095 upstream. Avoid warnings like this: thermal_hwmon.h:29:1: warning: ‘thermal_remove_hwmon_sysfs’ defined but not used [-Wunused-function] thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz) Fixes: 0dd88793aacd ("thermal: hwmon: move hwmon support to single file") Reviewed-by: Geert Uytterhoeven Signed-off-by: Eduardo Valentin Signed-off-by: Greg Kroah-Hartman

thermal: generic-adc: Fix adc to temp interpolation

2019-02-12T18:47:19+00:00

[ Upstream commit 9d216211fded20fff301d0317af3238d8383634c ] First correct the edge case to return the last element if we're outside the range, rather than at the last element, so that interpolation is not omitted for points between the two last entries in the table. Then correct the formula to perform linear interpolation based the two points surrounding the read ADC value. The indices for temp are kept as "hi" and "lo" to pair with the adc indices, but there's no requirement that the temperature is provided in descendent order. mult_frac() is used to prevent issues with overflowing the int. Cc: Laxman Dewangan Signed-off-by: Bjorn Andersson Signed-off-by: Eduardo Valentin Signed-off-by: Sasha Levin