kernel/linux.git/drivers/thermal, branch v4.14.263

thermal: core: Reset previous low and high trip during thermal zone init

2021-12-08T07:46:54+00:00

[ Upstream commit 99b63316c39988039965693f5f43d8b4ccb1c86c ] During the suspend is in process, thermal_zone_device_update bails out thermal zone re-evaluation for any sensor trip violation without setting next valid trip to that sensor. It assumes during resume it will re-evaluate same thermal zone and update trip. But when it is in suspend temperature goes down and on resume path while updating thermal zone if temperature is less than previously violated trip, thermal zone set trip function evaluates the same previous high and previous low trip as new high and low trip. Since there is no change in high/low trip, it bails out from thermal zone set trip API without setting any trip. It leads to a case where sensor high trip or low trip is disabled forever even though thermal zone has a valid high or low trip. During thermal zone device init, reset thermal zone previous high and low trip. It resolves above mentioned scenario. Signed-off-by: Manaf Meethalavalappu Pallikunhi Reviewed-by: Thara Gopinath Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

thermal/core: Potential buffer overflow in thermal_build_list_of_policies()

2021-10-06T13:05:06+00:00

[ Upstream commit 1bb30b20b49773369c299d4d6c65227201328663 ] After printing the list of thermal governors, then this function prints a newline character. The problem is that "size" has not been updated after printing the last governor. This means that it can write one character (the NUL terminator) beyond the end of the buffer. Get rid of the "size" variable and just use "PAGE_SIZE - count" directly. Fixes: 1b4f48494eb2 ("thermal: core: group functions related to governor handling") Signed-off-by: Dan Carpenter Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20210916131342.GB25094@kili Signed-off-by: Sasha Levin

thermal/drivers/exynos: Fix an error code in exynos_tmu_probe()

2021-09-26T11:37:28+00:00

commit 02d438f62c05f0d055ceeedf12a2f8796b258c08 upstream. This error path return success but it should propagate the negative error code from devm_clk_get(). Fixes: 6c247393cfdd ("thermal: exynos: Add TMU support for Exynos7 SoC") Signed-off-by: Dan Carpenter Reviewed-by: Krzysztof Kozlowski Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20210810084413.GA23810@kili Signed-off-by: Greg Kroah-Hartman

thermal/core: Correct function name thermal_zone_device_unregister()

2021-07-28T09:12:15+00:00

[ Upstream commit a052b5118f13febac1bd901fe0b7a807b9d6b51c ] Fix the following make W=1 kernel build warning: drivers/thermal/thermal_core.c:1376: warning: expecting prototype for thermal_device_unregister(). Prototype was for thermal_zone_device_unregister() instead Signed-off-by: Yang Yingliang Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20210517051020.3463536-1-yangyingliang@huawei.com Signed-off-by: Sasha Levin

thermal/core/fair share: Lock the thermal zone while looping over instances

2021-05-22T08:57:41+00:00

commit fef05776eb02238dcad8d5514e666a42572c3f32 upstream. The tz->lock must be hold during the looping over the instances in that thermal zone. This lock was missing in the governor code since the beginning, so it's hard to point into a particular commit. CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Lukasz Luba Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20210422153624.6074-2-lukasz.luba@arm.com Signed-off-by: Greg Kroah-Hartman

thermal: ti-soc-thermal: Fix bogus thermal shutdowns for omap4430

2020-09-09T17:03:10+00:00

[ Upstream commit 30d24faba0532d6972df79a1bf060601994b5873 ] We can sometimes get bogus thermal shutdowns on omap4430 at least with droid4 running idle with a battery charger connected: thermal thermal_zone0: critical temperature reached (143 C), shutting down Dumping out the register values shows we can occasionally get a 0x7f value that is outside the TRM listed values in the ADC conversion table. And then we get a normal value when reading again after that. Reading the register multiple times does not seem help avoiding the bogus values as they stay until the next sample is ready. Looking at the TRM chapter "18.4.10.2.3 ADC Codes Versus Temperature", we should have values from 13 to 107 listed with a total of 95 values. But looking at the omap4430_adc_to_temp array, the values are off, and the end values are missing. And it seems that the 4430 ADC table is similar to omap3630 rather than omap4460. Let's fix the issue by using values based on the omap3630 table and just ignoring invalid values. Compared to the 4430 TRM, the omap3630 table has the missing values added while the TRM table only shows every second value. Note that sometimes the ADC register values within the valid table can also be way off for about 1 out of 10 values. But it seems that those just show about 25 C too low values rather than too high values. So those do not cause a bogus thermal shutdown. Fixes: 1a31270e54d7 ("staging: omap-thermal: add OMAP4 data structures") Cc: Merlijn Wajer Cc: Pavel Machek Cc: Sebastian Reichel Signed-off-by: Tony Lindgren Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20200706183338.25622-1-tony@atomide.com Signed-off-by: Sasha Levin

thermal: ti-soc-thermal: Fix reversed condition in ti_thermal_expose_sensor()

2020-08-21T07:48:10+00:00

[ Upstream commit 0f348db01fdf128813fdd659fcc339038fb421a4 ] This condition is reversed and will cause breakage. Fixes: 7440f518dad9 ("thermal/drivers/ti-soc-thermal: Avoid dereferencing ERR_PTR") Signed-off-by: Dan Carpenter Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20200616091949.GA11940@mwanda Signed-off-by: Sasha Levin

thermal/drivers/cpufreq_cooling: Fix wrong frequency converted from power

2020-07-22T07:22:28+00:00

commit 371a3bc79c11b707d7a1b7a2c938dc3cc042fffb upstream. The function cpu_power_to_freq is used to find a frequency and set the cooling device to consume at most the power to be converted. For example, if the power to be converted is 80mW, and the em table is as follow. struct em_cap_state table[] = { /* KHz mW */ { 1008000, 36, 0 }, { 1200000, 49, 0 }, { 1296000, 59, 0 }, { 1416000, 72, 0 }, { 1512000, 86, 0 }, }; The target frequency should be 1416000KHz, not 1512000KHz. Fixes: 349d39dc5739 ("thermal: cpu_cooling: merge frequency and power tables") Cc: # v4.13+ Signed-off-by: Finley Xiao Acked-by: Viresh Kumar Reviewed-by: Amit Kucheria Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20200619090825.32747-1-finley.xiao@rock-chips.com Signed-off-by: Viresh Kumar Signed-off-by: Greg Kroah-Hartman

Revert "thermal: mediatek: fix register index error"

2020-07-22T07:22:24+00:00

[ Upstream commit a8f62f183021be389561570ab5f8c701a5e70298 ] This reverts commit eb9aecd90d1a39601e91cd08b90d5fee51d321a6 The above patch is supposed to fix a register index error on mt2701. It is not clear if the problem solved is a hang or just an invalid value returned, my guess is the second. The patch introduces, though, a new hang on MT8173 device making them unusable. So, seems reasonable, revert the patch because introduces a worst issue. The reason I send a revert instead of trying to fix the issue for MT8173 is because the information needed to fix the issue is in the datasheet and is not public. So I am not really able to fix it. Fixes the following bug when CONFIG_MTK_THERMAL is set on MT8173 devices. [ 2.222488] Unable to handle kernel paging request at virtual address ffff8000125f5001 [ 2.230421] Mem abort info: [ 2.233207] ESR = 0x96000021 [ 2.236261] EC = 0x25: DABT (current EL), IL = 32 bits [ 2.241571] SET = 0, FnV = 0 [ 2.244623] EA = 0, S1PTW = 0 [ 2.247762] Data abort info: [ 2.250640] ISV = 0, ISS = 0x00000021 [ 2.254473] CM = 0, WnR = 0 [ 2.257544] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000041850000 [ 2.264251] [ffff8000125f5001] pgd=000000013ffff003, pud=000000013fffe003, pmd=000000013fff9003, pte=006800001100b707 [ 2.274867] Internal error: Oops: 96000021 [#1] PREEMPT SMP [ 2.280432] Modules linked in: [ 2.283483] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.7.0-rc6+ #162 [ 2.289914] Hardware name: Google Elm (DT) [ 2.294003] pstate: 20000005 (nzCv daif -PAN -UAO) [ 2.298792] pc : mtk_read_temp+0xb8/0x1c8 [ 2.302793] lr : mtk_read_temp+0x7c/0x1c8 [ 2.306794] sp : ffff80001003b930 [ 2.310100] x29: ffff80001003b930 x28: 0000000000000000 [ 2.315404] x27: 0000000000000002 x26: ffff0000f9550b10 [ 2.320709] x25: ffff0000f9550a80 x24: 0000000000000090 [ 2.326014] x23: ffff80001003ba24 x22: 00000000610344c0 [ 2.331318] x21: 0000000000002710 x20: 00000000000001f4 [ 2.336622] x19: 0000000000030d40 x18: ffff800011742ec0 [ 2.341926] x17: 0000000000000001 x16: 0000000000000001 [ 2.347230] x15: ffffffffffffffff x14: ffffff0000000000 [ 2.352535] x13: ffffffffffffffff x12: 0000000000000028 [ 2.357839] x11: 0000000000000003 x10: ffff800011295ec8 [ 2.363143] x9 : 000000000000291b x8 : 0000000000000002 [ 2.368447] x7 : 00000000000000a8 x6 : 0000000000000004 [ 2.373751] x5 : 0000000000000000 x4 : ffff800011295cb0 [ 2.379055] x3 : 0000000000000002 x2 : ffff8000125f5001 [ 2.384359] x1 : 0000000000000001 x0 : ffff0000f9550a80 [ 2.389665] Call trace: [ 2.392105] mtk_read_temp+0xb8/0x1c8 [ 2.395760] of_thermal_get_temp+0x2c/0x40 [ 2.399849] thermal_zone_get_temp+0x78/0x160 [ 2.404198] thermal_zone_device_update.part.0+0x3c/0x1f8 [ 2.409589] thermal_zone_device_update+0x34/0x48 [ 2.414286] of_thermal_set_mode+0x58/0x88 [ 2.418375] thermal_zone_of_sensor_register+0x1a8/0x1d8 [ 2.423679] devm_thermal_zone_of_sensor_register+0x64/0xb0 [ 2.429242] mtk_thermal_probe+0x690/0x7d0 [ 2.433333] platform_drv_probe+0x5c/0xb0 [ 2.437335] really_probe+0xe4/0x448 [ 2.440901] driver_probe_device+0xe8/0x140 [ 2.445077] device_driver_attach+0x7c/0x88 [ 2.449252] __driver_attach+0xac/0x178 [ 2.453082] bus_for_each_dev+0x78/0xc8 [ 2.456909] driver_attach+0x2c/0x38 [ 2.460476] bus_add_driver+0x14c/0x230 [ 2.464304] driver_register+0x6c/0x128 [ 2.468131] __platform_driver_register+0x50/0x60 [ 2.472831] mtk_thermal_driver_init+0x24/0x30 [ 2.477268] do_one_initcall+0x50/0x298 [ 2.481098] kernel_init_freeable+0x1ec/0x264 [ 2.485450] kernel_init+0x1c/0x110 [ 2.488931] ret_from_fork+0x10/0x1c [ 2.492502] Code: f9401081 f9400402 b8a67821 8b010042 (b9400042) [ 2.498599] ---[ end trace e43e3105ed27dc99 ]--- [ 2.503367] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.511020] SMP: stopping secondary CPUs [ 2.514941] Kernel Offset: disabled [ 2.518421] CPU features: 0x090002,25006005 [ 2.522595] Memory Limit: none [ 2.525644] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]-- Cc: Michael Kao Fixes: eb9aecd90d1a ("thermal: mediatek: fix register index error") Signed-off-by: Enric Balletbo i Serra Reviewed-by: Matthias Brugger Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20200707103412.1010823-1-enric.balletbo@collabora.com Signed-off-by: Sasha Levin

thermal/drivers/ti-soc-thermal: Avoid dereferencing ERR_PTR

2020-06-25T13:41:51+00:00

[ Upstream commit 7440f518dad9d861d76c64956641eeddd3586f75 ] On error the function ti_bandgap_get_sensor_data() returns the error code in ERR_PTR() but we only checked if the return value is NULL or not. And, so we can dereference an error code inside ERR_PTR. While at it, convert a check to IS_ERR_OR_NULL. Signed-off-by: Sudip Mukherjee Reviewed-by: Amit Kucheria Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20200424161944.6044-1-sudipm.mukherjee@gmail.com Signed-off-by: Sasha Levin