kernel/linux.git/drivers/thermal/thermal_core.c, branch linux-4.4.y

thermal/core: Correct function name thermal_zone_device_unregister()

2021-07-28T07:12:34+00:00

[ Upstream commit a052b5118f13febac1bd901fe0b7a807b9d6b51c ] Fix the following make W=1 kernel build warning: drivers/thermal/thermal_core.c:1376: warning: expecting prototype for thermal_device_unregister(). Prototype was for thermal_zone_device_unregister() instead Signed-off-by: Yang Yingliang Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20210517051020.3463536-1-yangyingliang@huawei.com Signed-off-by: Sasha Levin

thermal: Fix deadlock in thermal thermal_zone_device_check

2019-12-21T09:35:00+00:00

commit 163b00cde7cf2206e248789d2780121ad5e6a70b upstream. 1851799e1d29 ("thermal: Fix use-after-free when unregistering thermal zone device") changed cancel_delayed_work to cancel_delayed_work_sync to avoid a use-after-free issue. However, cancel_delayed_work_sync could be called insides the WQ causing deadlock. [54109.642398] c0 1162 kworker/u17:1 D 0 11030 2 0x00000000 [54109.642437] c0 1162 Workqueue: thermal_passive_wq thermal_zone_device_check [54109.642447] c0 1162 Call trace: [54109.642456] c0 1162 __switch_to+0x138/0x158 [54109.642467] c0 1162 __schedule+0xba4/0x1434 [54109.642480] c0 1162 schedule_timeout+0xa0/0xb28 [54109.642492] c0 1162 wait_for_common+0x138/0x2e8 [54109.642511] c0 1162 flush_work+0x348/0x40c [54109.642522] c0 1162 __cancel_work_timer+0x180/0x218 [54109.642544] c0 1162 handle_thermal_trip+0x2c4/0x5a4 [54109.642553] c0 1162 thermal_zone_device_update+0x1b4/0x25c [54109.642563] c0 1162 thermal_zone_device_check+0x18/0x24 [54109.642574] c0 1162 process_one_work+0x3cc/0x69c [54109.642583] c0 1162 worker_thread+0x49c/0x7c0 [54109.642593] c0 1162 kthread+0x17c/0x1b0 [54109.642602] c0 1162 ret_from_fork+0x10/0x18 [54109.643051] c0 1162 kworker/u17:2 D 0 16245 2 0x00000000 [54109.643067] c0 1162 Workqueue: thermal_passive_wq thermal_zone_device_check [54109.643077] c0 1162 Call trace: [54109.643085] c0 1162 __switch_to+0x138/0x158 [54109.643095] c0 1162 __schedule+0xba4/0x1434 [54109.643104] c0 1162 schedule_timeout+0xa0/0xb28 [54109.643114] c0 1162 wait_for_common+0x138/0x2e8 [54109.643122] c0 1162 flush_work+0x348/0x40c [54109.643131] c0 1162 __cancel_work_timer+0x180/0x218 [54109.643141] c0 1162 handle_thermal_trip+0x2c4/0x5a4 [54109.643150] c0 1162 thermal_zone_device_update+0x1b4/0x25c [54109.643159] c0 1162 thermal_zone_device_check+0x18/0x24 [54109.643167] c0 1162 process_one_work+0x3cc/0x69c [54109.643177] c0 1162 worker_thread+0x49c/0x7c0 [54109.643186] c0 1162 kthread+0x17c/0x1b0 [54109.643195] c0 1162 ret_from_fork+0x10/0x18 [54109.644500] c0 1162 cat D 0 7766 1 0x00000001 [54109.644515] c0 1162 Call trace: [54109.644524] c0 1162 __switch_to+0x138/0x158 [54109.644536] c0 1162 __schedule+0xba4/0x1434 [54109.644546] c0 1162 schedule_preempt_disabled+0x80/0xb0 [54109.644555] c0 1162 __mutex_lock+0x3a8/0x7f0 [54109.644563] c0 1162 __mutex_lock_slowpath+0x14/0x20 [54109.644575] c0 1162 thermal_zone_get_temp+0x84/0x360 [54109.644586] c0 1162 temp_show+0x30/0x78 [54109.644609] c0 1162 dev_attr_show+0x5c/0xf0 [54109.644628] c0 1162 sysfs_kf_seq_show+0xcc/0x1a4 [54109.644636] c0 1162 kernfs_seq_show+0x48/0x88 [54109.644656] c0 1162 seq_read+0x1f4/0x73c [54109.644664] c0 1162 kernfs_fop_read+0x84/0x318 [54109.644683] c0 1162 __vfs_read+0x50/0x1bc [54109.644692] c0 1162 vfs_read+0xa4/0x140 [54109.644701] c0 1162 SyS_read+0xbc/0x144 [54109.644708] c0 1162 el0_svc_naked+0x34/0x38 [54109.845800] c0 1162 D 720.000s 1->7766->7766 cat [panic] Fixes: 1851799e1d29 ("thermal: Fix use-after-free when unregistering thermal zone device") Cc: stable@vger.kernel.org Signed-off-by: Wei Wang Signed-off-by: Zhang Rui Signed-off-by: Greg Kroah-Hartman

thermal: Fix use-after-free when unregistering thermal zone device

2019-10-17T20:40:55+00:00

[ Upstream commit 1851799e1d2978f68eea5d9dff322e121dcf59c1 ] thermal_zone_device_unregister() cancels the delayed work that polls the thermal zone, but it does not wait for it to finish. This is racy with respect to the freeing of the thermal zone device, which can result in a use-after-free [1]. Fix this by waiting for the delayed work to finish before freeing the thermal zone device. Note that thermal_zone_device_set_polling() is never invoked from an atomic context, so it is safe to call cancel_delayed_work_sync() that can block. [1] [ +0.002221] ================================================================== [ +0.000064] BUG: KASAN: use-after-free in __mutex_lock+0x1076/0x11c0 [ +0.000016] Read of size 8 at addr ffff8881e48e0450 by task kworker/1:0/17 [ +0.000023] CPU: 1 PID: 17 Comm: kworker/1:0 Not tainted 5.2.0-rc6-custom-02495-g8e73ca3be4af #1701 [ +0.000010] Hardware name: Mellanox Technologies Ltd. MSN2100-CB2FO/SA001017, BIOS 5.6.5 06/07/2016 [ +0.000016] Workqueue: events_freezable_power_ thermal_zone_device_check [ +0.000012] Call Trace: [ +0.000021] dump_stack+0xa9/0x10e [ +0.000020] print_address_description.cold.2+0x9/0x25e [ +0.000018] __kasan_report.cold.3+0x78/0x9d [ +0.000016] kasan_report+0xe/0x20 [ +0.000016] __mutex_lock+0x1076/0x11c0 [ +0.000014] step_wise_throttle+0x72/0x150 [ +0.000018] handle_thermal_trip+0x167/0x760 [ +0.000019] thermal_zone_device_update+0x19e/0x5f0 [ +0.000019] process_one_work+0x969/0x16f0 [ +0.000017] worker_thread+0x91/0xc40 [ +0.000014] kthread+0x33d/0x400 [ +0.000015] ret_from_fork+0x3a/0x50 [ +0.000020] Allocated by task 1: [ +0.000015] save_stack+0x19/0x80 [ +0.000015] __kasan_kmalloc.constprop.4+0xc1/0xd0 [ +0.000014] kmem_cache_alloc_trace+0x152/0x320 [ +0.000015] thermal_zone_device_register+0x1b4/0x13a0 [ +0.000015] mlxsw_thermal_init+0xc92/0x23d0 [ +0.000014] __mlxsw_core_bus_device_register+0x659/0x11b0 [ +0.000013] mlxsw_core_bus_device_register+0x3d/0x90 [ +0.000013] mlxsw_pci_probe+0x355/0x4b0 [ +0.000014] local_pci_probe+0xc3/0x150 [ +0.000013] pci_device_probe+0x280/0x410 [ +0.000013] really_probe+0x26a/0xbb0 [ +0.000013] driver_probe_device+0x208/0x2e0 [ +0.000013] device_driver_attach+0xfe/0x140 [ +0.000013] __driver_attach+0x110/0x310 [ +0.000013] bus_for_each_dev+0x14b/0x1d0 [ +0.000013] driver_register+0x1c0/0x400 [ +0.000015] mlxsw_sp_module_init+0x5d/0xd3 [ +0.000014] do_one_initcall+0x239/0x4dd [ +0.000013] kernel_init_freeable+0x42b/0x4e8 [ +0.000012] kernel_init+0x11/0x18b [ +0.000013] ret_from_fork+0x3a/0x50 [ +0.000015] Freed by task 581: [ +0.000013] save_stack+0x19/0x80 [ +0.000014] __kasan_slab_free+0x125/0x170 [ +0.000013] kfree+0xf3/0x310 [ +0.000013] thermal_release+0xc7/0xf0 [ +0.000014] device_release+0x77/0x200 [ +0.000014] kobject_put+0x1a8/0x4c0 [ +0.000014] device_unregister+0x38/0xc0 [ +0.000014] thermal_zone_device_unregister+0x54e/0x6a0 [ +0.000014] mlxsw_thermal_fini+0x184/0x35a [ +0.000014] mlxsw_core_bus_device_unregister+0x10a/0x640 [ +0.000013] mlxsw_devlink_core_bus_device_reload+0x92/0x210 [ +0.000015] devlink_nl_cmd_reload+0x113/0x1f0 [ +0.000014] genl_family_rcv_msg+0x700/0xee0 [ +0.000013] genl_rcv_msg+0xca/0x170 [ +0.000013] netlink_rcv_skb+0x137/0x3a0 [ +0.000012] genl_rcv+0x29/0x40 [ +0.000013] netlink_unicast+0x49b/0x660 [ +0.000013] netlink_sendmsg+0x755/0xc90 [ +0.000013] __sys_sendto+0x3de/0x430 [ +0.000013] __x64_sys_sendto+0xe2/0x1b0 [ +0.000013] do_syscall_64+0xa4/0x4d0 [ +0.000013] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ +0.000017] The buggy address belongs to the object at ffff8881e48e0008 which belongs to the cache kmalloc-2k of size 2048 [ +0.000012] The buggy address is located 1096 bytes inside of 2048-byte region [ffff8881e48e0008, ffff8881e48e0808) [ +0.000007] The buggy address belongs to the page: [ +0.000012] page:ffffea0007923800 refcount:1 mapcount:0 mapping:ffff88823680d0c0 index:0x0 compound_mapcount: 0 [ +0.000020] flags: 0x200000000010200(slab|head) [ +0.000019] raw: 0200000000010200 ffffea0007682008 ffffea00076ab808 ffff88823680d0c0 [ +0.000016] raw: 0000000000000000 00000000000d000d 00000001ffffffff 0000000000000000 [ +0.000007] page dumped because: kasan: bad access detected [ +0.000012] Memory state around the buggy address: [ +0.000012] ffff8881e48e0300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ +0.000012] ffff8881e48e0380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ +0.000012] >ffff8881e48e0400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ +0.000008] ^ [ +0.000012] ffff8881e48e0480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ +0.000012] ffff8881e48e0500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ +0.000007] ================================================================== Fixes: b1569e99c795 ("ACPI: move thermal trip handling to generic thermal layer") Reported-by: Jiri Pirko Signed-off-by: Ido Schimmel Acked-by: Jiri Pirko Signed-off-by: Zhang Rui Signed-off-by: Sasha Levin

Thermal: Ignore invalid trip points

2016-04-12T16:08:35+00:00

commit 81ad4276b505e987dd8ebbdf63605f92cd172b52 upstream. In some cases, platform thermal driver may report invalid trip points, thermal core should not take any action for these trip points. This fixed a regression that bogus trip point starts to screw up thermal control on some Lenovo laptops, after commit bb431ba26c5cd0a17c941ca6c3a195a3a6d5d461 Author: Zhang Rui Date: Fri Oct 30 16:31:47 2015 +0800 Thermal: initialize thermal zone device correctly After thermal zone device registered, as we have not read any temperature before, thus tz->temperature should not be 0, which actually means 0C, and thermal trend is not available. In this case, we need specially handling for the first thermal_zone_device_update(). Both thermal core framework and step_wise governor is enhanced to handle this. And since the step_wise governor is the only one that uses trends, so it's the only thermal governor that needs to be updated. Tested-by: Manuel Krause Tested-by: szegad Tested-by: prash Tested-by: amish Tested-by: Matthias Reviewed-by: Javi Merino Signed-off-by: Zhang Rui Signed-off-by: Chen Yu Link: https://bugzilla.redhat.com/show_bug.cgi?id=1317190 Link: https://bugzilla.kernel.org/show_bug.cgi?id=114551 Signed-off-by: Zhang Rui Signed-off-by: Greg Kroah-Hartman

Thermal: do thermal zone update after a cooling device registered

2016-03-03T23:07:25+00:00

commit 4511f7166a2deb5f7a578cf87fd2fe1ae83527e3 upstream. When a new cooling device is registered, we need to update the thermal zone to set the new registered cooling device to a proper state. This fixes a problem that the system is cool, while the fan devices are left running on full speed after boot, if fan device is registered after thermal zone device. Here is the history of why current patch looks like this: https://patchwork.kernel.org/patch/7273041/ Reference:https://bugzilla.kernel.org/show_bug.cgi?id=92431 Tested-by: Manuel Krause Tested-by: szegad Tested-by: prash Tested-by: amish Reviewed-by: Javi Merino Signed-off-by: Zhang Rui Signed-off-by: Chen Yu Signed-off-by: Greg Kroah-Hartman

Thermal: handle thermal zone device properly during system sleep

2016-03-03T23:07:25+00:00

commit ff140fea847e1c2002a220571ab106c2456ed252 upstream. Current thermal code does not handle system sleep well because 1. the cooling device cooling state may be changed during suspend 2. the previous temperature reading becomes invalid after resumed because it is got before system sleep 3. updating thermal zone device during suspending/resuming is wrong because some devices may have already been suspended or may have not been resumed. Thus, the proper way to do this is to cancel all thermal zone device update requirements during suspend/resume, and after all the devices have been resumed, reset and update every registered thermal zone devices. This also fixes a regression introduced by: Commit 19593a1fb1f6 ("ACPI / fan: convert to platform driver") Because, with above commit applied, all the fan devices are attached to the acpi_general_pm_domain, and they are turned on by the pm_domain automatically after resume, without the awareness of thermal core. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=78201 Reference: https://bugzilla.kernel.org/show_bug.cgi?id=91411 Tested-by: Manuel Krause Tested-by: szegad Tested-by: prash Tested-by: amish Tested-by: Matthias Reviewed-by: Javi Merino Signed-off-by: Zhang Rui Signed-off-by: Chen Yu Signed-off-by: Greg Kroah-Hartman

Thermal: initialize thermal zone device correctly

2016-03-03T23:07:25+00:00

commit bb431ba26c5cd0a17c941ca6c3a195a3a6d5d461 upstream. After thermal zone device registered, as we have not read any temperature before, thus tz->temperature should not be 0, which actually means 0C, and thermal trend is not available. In this case, we need specially handling for the first thermal_zone_device_update(). Both thermal core framework and step_wise governor is enhanced to handle this. And since the step_wise governor is the only one that uses trends, so it's the only thermal governor that needs to be updated. Tested-by: Manuel Krause Tested-by: szegad Tested-by: prash Tested-by: amish Tested-by: Matthias Reviewed-by: Javi Merino Signed-off-by: Zhang Rui Signed-off-by: Chen Yu Signed-off-by: Greg Kroah-Hartman

thermal: Add a function to get the minimum power

2015-09-14T14:39:46+00:00

The thermal core already has a function to get the maximum power of a cooling device: power_actor_get_max_power(). Add a function to get the minimum power of a cooling device. Cc: Zhang Rui Cc: Eduardo Valentin Reviewed-by: Daniel Kurtz Signed-off-by: Javi Merino Signed-off-by: Eduardo Valentin

Merge branches 'thermal-core' and 'thermal-intel' of .git into next

2015-09-02T02:08:02+00:00

thermal: Add comment explaining test for critical temperature

2015-08-03T15:15:51+00:00

The code testing if a temperature should be emulated or not is not obvious. Add a comment explaining why this test is done. Signed-off-by: Sascha Hauer Reviewed-by: Mikko Perttunen Signed-off-by: Zhang Rui