kernel/linux.git/drivers/thermal/intel, branch v6.1.87

thermal: intel: hfi: Add syscore callbacks for system-wide PM

2024-02-01T00:17:09+00:00

[ Upstream commit 97566d09fd02d2ab329774bb89a2cdf2267e86d9 ] The kernel allocates a memory buffer and provides its location to the hardware, which uses it to update the HFI table. This allocation occurs during boot and remains constant throughout runtime. When resuming from hibernation, the restore kernel allocates a second memory buffer and reprograms the HFI hardware with the new location as part of a normal boot. The location of the second memory buffer may differ from the one allocated by the image kernel. When the restore kernel transfers control to the image kernel, its HFI buffer becomes invalid, potentially leading to memory corruption if the hardware writes to it (the hardware continues to use the buffer from the restore kernel). It is also possible that the hardware "forgets" the address of the memory buffer when resuming from "deep" suspend. Memory corruption may also occur in such a scenario. To prevent the described memory corruption, disable HFI when preparing to suspend or hibernate. Enable it when resuming. Add syscore callbacks to handle the package of the boot CPU (packages of non-boot CPUs are handled via CPU offline). Syscore ops always run on the boot CPU. Additionally, HFI only needs to be disabled during "deep" suspend and hibernation. Syscore ops only run in these cases. Cc: 6.1+ # 6.1+ Signed-off-by: Ricardo Neri [ rjw: Comment adjustment, subject and changelog edits ] Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

thermal: intel: hfi: Disable an HFI instance when all its CPUs go offline

2024-02-01T00:17:09+00:00

[ Upstream commit 1c53081d773c2cb4461636559b0d55b46559ceec ] In preparation to support hibernation, add functionality to disable an HFI instance during CPU offline. The last CPU of an instance that goes offline will disable such instance. The Intel Software Development Manual states that the operating system must wait for the hardware to set MSR_IA32_PACKAGE_THERM_STATUS[26] after disabling an HFI instance to ensure that it will no longer write on the HFI memory. Some processors, however, do not ever set such bit. Wait a minimum of 2ms to give time hardware to complete any pending memory writes. Signed-off-by: Ricardo Neri Signed-off-by: Rafael J. Wysocki Stable-dep-of: 97566d09fd02 ("thermal: intel: hfi: Add syscore callbacks for system-wide PM") Signed-off-by: Sasha Levin

thermal: intel: hfi: Refactor enabling code into helper functions

2024-02-01T00:17:09+00:00

[ Upstream commit 8a8b6bb93c704776c4b05cb517c3fa8baffb72f5 ] In preparation for the addition of a suspend notifier, wrap the logic to enable HFI and program its memory buffer into helper functions. Both the CPU hotplug callback and the suspend notifier will use them. This refactoring does not introduce functional changes. Signed-off-by: Ricardo Neri Signed-off-by: Rafael J. Wysocki Stable-dep-of: 97566d09fd02 ("thermal: intel: hfi: Add syscore callbacks for system-wide PM") Signed-off-by: Sasha Levin

thermal: intel: BXT_PMIC: select REGMAP instead of depending on it

2023-03-11T12:55:32+00:00

[ Upstream commit 1467fb960349dfa5e300658f1a409dde2cfb0c51 ] REGMAP is a hidden (not user visible) symbol. Users cannot set it directly thru "make *config", so drivers should select it instead of depending on it if they need it. Consistently using "select" or "depends on" can also help reduce Kconfig circular dependency issues. Therefore, change the use of "depends on REGMAP" to "select REGMAP". Fixes: b474303ffd57 ("thermal: add Intel BXT WhiskeyCove PMIC thermal driver") Signed-off-by: Randy Dunlap Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

thermal: intel: quark_dts: fix error pointer dereference

2023-03-11T12:55:31+00:00

[ Upstream commit f1b930e740811d416de4d2074da48b6633a672c8 ] If alloc_soc_dts() fails, then we can just return. Trying to free "soc_dts" will lead to an Oops. Fixes: 8c1876939663 ("thermal: intel Quark SoC X1000 DTS thermal driver") Signed-off-by: Dan Carpenter Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

thermal: intel: powerclamp: Fix cur_state for multi package system

2023-03-10T08:34:22+00:00

commit 8e47363588377e1bdb65e2b020b409cfb44dd260 upstream. The powerclamp cooling device cur_state shows actual idle observed by package C-state idle counters. But the implementation is not sufficient for multi package or multi die system. The cur_state value is incorrect. On these systems, these counters must be read from each package/die and somehow aggregate them. But there is no good method for aggregation. It was not a problem when explicit CPU model addition was required to enable intel powerclamp. In this way certain CPU models could have been avoided. But with the removal of CPU model check with the availability of Package C-state counters, the driver is loaded on most of the recent systems. For multi package/die systems, just show the actual target idle state, the system is trying to achieve. In powerclamp this is the user set state minus one. Also there is no use of starting a worker thread for polling package C-state counters and applying any compensation for multiple package or multiple die systems. Fixes: b721ca0d1927 ("thermal/powerclamp: remove cpu whitelist") Signed-off-by: Srinivas Pandruvada Cc: 4.14+ # 4.14+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

thermal: intel: intel_pch: Add support for Wellsburg PCH

2023-03-10T08:33:50+00:00

[ Upstream commit 40dc1929089fc844ea06d9f8bdb6211ed4517c2e ] Add the PCI ID for the Wellsburg C610 series chipset PCH. The driver can read the temperature from the Wellsburg PCH with only the PCI ID added and no other modifications. Signed-off-by: Tim Zimmermann Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

thermal: intel: Fix unsigned comparison with less than zero

2023-03-10T08:33:49+00:00

[ Upstream commit e7fcfe67f9f410736b758969477b17ea285e8e6c ] The return value from the call to intel_tcc_get_tjmax() is int, which can be a negative error code. However, the return value is being assigned to an u32 variable 'tj_max', so making 'tj_max' an int. Eliminate the following warning: ./drivers/thermal/intel/intel_soc_dts_iosf.c:394:5-11: WARNING: Unsigned expression compared with zero: tj_max < 0 Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3637 Reported-by: Abaci Robot Signed-off-by: Yang Li Acked-by: Zhang Rui Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

thermal: intel: int340x: Add locking to int340x_thermal_get_trip_type()

2023-02-01T07:34:48+00:00

[ Upstream commit acd7e9ee57c880b99671dd99680cb707b7b5b0ee ] In order to prevent int340x_thermal_get_trip_type() from possibly racing with int340x_thermal_read_trips() invoked by int3403_notify() add locking to it in analogy with int340x_thermal_get_trip_temp(). Fixes: 6757a7abe47b ("thermal: intel: int340x: Protect trip temperature from concurrent updates") Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

thermal: intel: int340x: Protect trip temperature from concurrent updates

2023-02-01T07:34:39+00:00

commit 6757a7abe47bcb12cb2d45661067e182424b0ee3 upstream. Trip temperatures are read using ACPI methods and stored in the memory during zone initializtion and when the firmware sends a notification for change. This trip temperature is returned when the thermal core calls via callback get_trip_temp(). But it is possible that while updating the memory copy of the trips when the firmware sends a notification for change, thermal core is reading the trip temperature via the callback get_trip_temp(). This may return invalid trip temperature. To address this add a mutex to protect the invalid temperature reads in the callback get_trip_temp() and int340x_thermal_read_trips(). Fixes: 5fbf7f27fa3d ("Thermal/int340x: Add common thermal zone handler") Signed-off-by: Srinivas Pandruvada Cc: 5.0+ # 5.0+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman