kernel/linux.git/drivers/thermal/intel, branch v5.9.12

Merge tag 'thermal-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux

2020-08-07T01:10:55+00:00

Pull thermal updates from Daniel Lezcano: - Add support to enable/disable the thermal zones resulting on core code and drivers cleanup (Andrzej Pietrasiewicz) - Add generic netlink support for userspace notifications: events, temperature and discovery commands (Daniel Lezcano) - Fix redundant initialization for a ret variable (Colin Ian King) - Remove the clock cooling code as it is used nowhere (Amit Kucheria) - Add the rcar_gen3_thermal's r8a774e1 support (Marian-Cristian Rotariu) - Replace all references to thermal.txt in the documentation to the corresponding yaml files (Amit Kucheria) - Add maintainer entry for the IPA (Lukasz Luba) - Add support for MSM8939 for the tsens (Shawn Guo) - Update power allocator and devfreq cooling to SPDX licensing (Lukasz Luba) - Add Cannon Lake Low Power PCH support (Sumeet Pawnikar) - Add tsensor support for V2 mediatek thermal system (Henry Yen) - Fix thermal zone lookup by ID for the core code (Thierry Reding) * tag 'thermal-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (40 commits) thermal: intel: intel_pch_thermal: Add Cannon Lake Low Power PCH support thermal: mediatek: Add tsensor support for V2 thermal system thermal: mediatek: Prepare to add support for other platforms thermal: Update power allocator and devfreq cooling to SPDX licensing MAINTAINERS: update entry to thermal governors file name prefixing thermal: core: Add thermal zone enable/disable notification thermal: qcom: tsens-v0_1: Add support for MSM8939 dt-bindings: tsens: qcom: Document MSM8939 compatible thermal: core: Fix thermal zone lookup by ID thermal: int340x: processor_thermal: fix: update Jasper Lake PCI id thermal: imx8mm: Support module autoloading thermal: ti-soc-thermal: Fix reversed condition in ti_thermal_expose_sensor() MAINTAINERS: Add maintenance information for IPA thermal: rcar_gen3_thermal: Do not shadow thcode variable dt-bindings: thermal: Get rid of thermal.txt and replace references thermal: core: Move initialization after core initcall thermal: netlink: Improve the initcall ordering net: genetlink: Move initialization to core_initcall thermal: rcar_gen3_thermal: Add r8a774e1 support thermal/drivers/clock_cooling: Remove clock_cooling code ...

Merge tag 'sched-fifo-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2020-08-06T18:55:43+00:00

Pull sched/fifo updates from Ingo Molnar: "This adds the sched_set_fifo*() encapsulation APIs to remove static priority level knowledge from non-scheduler code. The three APIs for non-scheduler code to set SCHED_FIFO are: - sched_set_fifo() - sched_set_fifo_low() - sched_set_normal() These are two FIFO priority levels: default (high), and a 'low' priority level, plus sched_set_normal() to set the policy back to non-SCHED_FIFO. Since the changes affect a lot of non-scheduler code, we kept this in a separate tree" * tag 'sched-fifo-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) sched,tracing: Convert to sched_set_fifo() sched: Remove sched_set_*() return value sched: Remove sched_setscheduler*() EXPORTs sched,psi: Convert to sched_set_fifo_low() sched,rcutorture: Convert to sched_set_fifo_low() sched,rcuperf: Convert to sched_set_fifo_low() sched,locktorture: Convert to sched_set_fifo() sched,irq: Convert to sched_set_fifo() sched,watchdog: Convert to sched_set_fifo() sched,serial: Convert to sched_set_fifo() sched,powerclamp: Convert to sched_set_fifo() sched,ion: Convert to sched_set_normal() sched,powercap: Convert to sched_set_fifo*() sched,spi: Convert to sched_set_fifo*() sched,mmc: Convert to sched_set_fifo*() sched,ivtv: Convert to sched_set_fifo*() sched,drm/scheduler: Convert to sched_set_fifo*() sched,msm: Convert to sched_set_fifo*() sched,psci: Convert to sched_set_fifo*() sched,drbd: Convert to sched_set_fifo*() ...

thermal: intel: intel_pch_thermal: Add Cannon Lake Low Power PCH support

2020-08-04T08:43:03+00:00

Add LP (Low Power) PCH id for Cannon Lake (CNL) based platforms. Signed-off-by: Sumeet Pawnikar Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/1596097503-27924-1-git-send-email-sumeet.r.pawnikar@intel.com

thermal: int340x: processor_thermal: fix: update Jasper Lake PCI id

2020-07-24T11:39:49+00:00

Update PCI device id for Jasper Lake processor thermal device. With this proc_thermal driver is getting loaded and processor thermal functionality works on Jasper Lake system. Fixes: f64a6583d3f5 ("thermal: int340x: processor_thermal: Add Jasper Lake support") Signed-off-by: Sumeet Pawnikar Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/1595577146-1221-1-git-send-email-sumeet.r.pawnikar@intel.com

thermal: int3403_thermal: Downgrade error message

2020-07-15T01:10:28+00:00

Downgrade "Unsupported event" message from dev_err to dev_dbg to avoid flooding with this message on some platforms. Cc: stable@vger.kernel.org # v5.4+ Suggested-by: Zhang Rui Signed-off-by: Alex Hung [ rzhang: fix typo in changelog ] Signed-off-by: Zhang Rui Link: https://lore.kernel.org/r/20200615223957.183153-1-alex.hung@canonical.com

thermal/int340x_thermal: Prevent page fault on .set_mode() op

2020-07-14T14:46:44+00:00

Starting from commit "thermal/int340x_thermal: Don't require IDSP to exist", priv->current_uuid_index is initialized to -1. This value may be passed to int3400_thermal_run_osc() from int3400_thermal_set_mode, contributing to page fault when accessing int3400_thermal_uuids array at index -1. This commit adds a check on uuid value to int3400_thermal_run_osc. Fixes: 8d485da0ddee ("thermal/int340x_thermal: Don't require IDSP to exist") Signed-off-by: Bartosz Szczepanek Reviewed-by: Pandruvada, Srinivas [ rzhang: Add Fixes tag ] Signed-off-by: Zhang Rui Link: https://lore.kernel.org/r/20200708134613.131555-1-bsz@semihalf.com

thermal: Rename set_mode() to change_mode()

2020-06-29T18:26:39+00:00

set_mode() is only called when tzd's mode is about to change. Actual setting is performed in thermal_core, in thermal_zone_device_set_mode(). The meaning of set_mode() callback is actually to notify the driver about the mode being changed and giving the driver a chance to oppose such change. To better reflect the purpose of the method rename it to change_mode() Signed-off-by: Andrzej Pietrasiewicz [for acerhdf] Acked-by: Peter Kaestle Reviewed-by: Bartlomiej Zolnierkiewicz Reviewed-by: Amit Kucheria Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20200629122925.21729-12-andrzej.p@collabora.com

thermal: Simplify or eliminate unnecessary set_mode() methods

2020-06-29T18:26:39+00:00

Setting polling_delay is now done at thermal_core level (by not polling DISABLED devices), so no need to repeat this code. int340x: Checking for an impossible enum value is unnecessary. acpi/thermal: It only prints debug messages. Signed-off-by: Andrzej Pietrasiewicz [for acerhdf] Acked-by: Peter Kaestle Reviewed-by: Bartlomiej Zolnierkiewicz Reviewed-by: Amit Kucheria Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20200629122925.21729-11-andrzej.p@collabora.com

thermal: Explicitly enable non-changing thermal zone devices

2020-06-29T18:26:37+00:00

Some thermal zone devices never change their state, so they should be always enabled. Signed-off-by: Andrzej Pietrasiewicz Reviewed-by: Bartlomiej Zolnierkiewicz Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20200629122925.21729-9-andrzej.p@collabora.com

thermal: Use mode helpers in drivers

2020-06-29T18:26:36+00:00

Use thermal_zone_device_{en|dis}able() and thermal_zone_device_is_enabled(). Consequently, all set_mode() implementations in drivers: - can stop modifying tzd's "mode" member, - shall stop taking tzd's lock, as it is taken in the helpers - shall stop calling thermal_zone_device_update() as it is called in the helpers - can assume they are called when the mode truly changes, so checks to verify that can be dropped Not providing set_mode() by a driver no longer prevents the core from being able to set tzd's mode, so the relevant check in mode_store() is removed. Other comments: - acpi/thermal.c: tz->thermal_zone->mode will be updated only after we return from set_mode(), so use function parameter in thermal_set_mode() instead, no need to call acpi_thermal_check() in set_mode() - thermal/imx_thermal.c: regmap writes and mode assignment are done in thermal_zone_device_{en|dis}able() and set_mode() callback - thermal/intel/intel_quark_dts_thermal.c: soc_dts_{en|dis}able() are a part of set_mode() callback, so they don't need to modify tzd->mode, and don't need to fall back to the opposite mode if unsuccessful, as the return value will be propagated to thermal_zone_device_{en|dis}able() and ultimately tzd's member will not be changed in thermal_zone_device_set_mode(). - thermal/of-thermal.c: no need to set zone->mode to DISABLED in of_parse_thermal_zones() as a tzd is kzalloc'ed so mode is DISABLED anyway Signed-off-by: Andrzej Pietrasiewicz [for acerhdf] Acked-by: Peter Kaestle Reviewed-by: Amit Kucheria Reviewed-by: Bartlomiej Zolnierkiewicz Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20200629122925.21729-8-andrzej.p@collabora.com