kernel/linux.git/drivers/thermal/Makefile, branch v6.19.11

thermal/drivers/imx91: Add support for i.MX91 thermal monitoring unit

2025-11-26T14:51:28+00:00

Introduce support for the i.MX91 thermal monitoring unit, which features a single sensor for the CPU. The register layout differs from other chips, necessitating the creation of a dedicated file for this. This sensor provides a resolution of 1/64°C (6-bit fraction). For actual accuracy, refer to the datasheet, as it varies depending on the chip grade. Provide an interrupt for end of measurement and threshold violation and Contain temperature threshold comparators, in normal and secure address space, with direction and threshold programmability. Datasheet Link: https://www.nxp.com/docs/en/data-sheet/IMX91CEC.pdf Signed-off-by: Pengfei Li Signed-off-by: Peng Fan Signed-off-by: Frank Li Signed-off-by: Daniel Lezcano Link: https://patch.msgid.link/20251020-imx91tmu-v7-2-48d7d9f25055@nxp.com

thermal/drivers: Add support for Airoha EN7581 thermal sensor

2025-05-16T10:50:01+00:00

Add support for Airoha EN7581 thermal sensor. This provide support for reading the CPU or SoC Package sensor and to setup trip points for hot and critical condition. An interrupt is fired to react on this and doesn't require passive poll to read the temperature. The thermal regs provide a way to read the ADC value from an external register placed in the Chip SCU regs. Monitor will read this value and fire an interrupt if the trip condition configured is reached. The Thermal Trip and Interrupt logic is conceptually similar to Mediatek LVTS Thermal but differ in register mapping and actual function/bug workaround. The implementation only share some register names but from functionality observation it's very different and used only for the basic function of periodically poll the temp and trip the interrupt. Signed-off-by: Christian Marangi Link: https://lore.kernel.org/r/20250511185003.3754495-2-ansuelsmth@gmail.com Signed-off-by: Daniel Lezcano

Merge tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

2024-11-27T02:05:44+00:00

Pull PCI updates from Bjorn Helgaas: "Enumeration: - Make pci_stop_dev() and pci_destroy_dev() safe so concurrent callers can't stop a device multiple times, even as we migrate from the global pci_rescan_remove_lock to finer-grained locking (Keith Busch) - Improve pci_walk_bus() implementation by making it recursive and moving locking up to avoid need for a 'locked' parameter (Keith Busch) - Unexport pci_walk_bus_locked(), which is only used internally by the PCI core (Keith Busch) - Detect some Thunderbolt chips that are built-in and hence 'trustworthy' by a heuristic since the 'ExternalFacingPort' and 'usb4-host-interface' ACPI properties are not quite enough (Esther Shimanovich) Resource management: - Use PCI bus addresses (not CPU addresses) in 'ranges' properties when building dynamic DT nodes so systems where PCI and CPU addresses differ work correctly (Andrea della Porta) - Tidy resource sizing and assignment with helpers to reduce redundancy (Ilpo Järvinen) - Improve pdev_sort_resources() 'bogus alignment' warning to be more specific (Ilpo Järvinen) Driver binding: - Convert driver .remove_new() callbacks to .remove() again to finish the conversion from returning 'int' to being 'void' (Sergio Paracuellos) - Export pcim_request_all_regions(), a managed interface to request all BARs (Philipp Stanner) - Replace pcim_iomap_regions_request_all() with pcim_request_all_regions(), and pcim_iomap_table()[n] with pcim_iomap(n), in the following drivers: ahci, crypto qat, crypto octeontx2, intel_th, iwlwifi, ntb idt, serial rp2, ALSA korg1212 (Philipp Stanner) - Remove the now unused pcim_iomap_regions_request_all() (Philipp Stanner) - Export pcim_iounmap_region(), a managed interface to unmap and release a PCI BAR (Philipp Stanner) - Replace pcim_iomap_regions(mask) with pcim_iomap_region(n), and pcim_iounmap_regions(mask) with pcim_iounmap_region(n), in the following drivers: fpga dfl-pci, block mtip32xx, gpio-merrifield, cavium (Philipp Stanner) Error handling: - Add sysfs 'reset_subordinate' to reset the entire hierarchy below a bridge; previously Secondary Bus Reset could only be used when there was a single device below a bridge (Keith Busch) - Warn if we reset a running device where the driver didn't register pci_error_handlers notification callbacks (Keith Busch) ASPM: - Disable ASPM L1 before touching L1 PM Substates to follow the spec closer and avoid a CPU load timeout on some platforms (Ajay Agarwal) - Set devices below Intel VMD to D0 before enabling ASPM L1 Substates as required per spec for all L1 Substates changes (Jian-Hong Pan) Power management: - Enable starfive controller runtime PM before probing host bridge (Mayank Rana) - Enable runtime power management for host bridges (Krishna chaitanya chundru) Power control: - Use of_platform_device_create() instead of of_platform_populate() to create pwrctl platform devices so we can control it based on the child nodes (Manivannan Sadhasivam) - Create pwrctrl platform devices only if there's a relevant power supply property (Manivannan Sadhasivam) - Add device link from the pwrctl supplier to the PCI dev to ensure pwrctl drivers are probed before the PCI dev driver; this avoids a race where pwrctl could change device power state while the PCI driver was active (Manivannan Sadhasivam) - Find pwrctl device for removal with of_find_device_by_node() instead of searching all children of the parent (Manivannan Sadhasivam) - Rename 'pwrctl' to 'pwrctrl' to match new bandwidth controller ('bwctrl') and hotplug files (Bjorn Helgaas) Bandwidth control: - Add read/modify/write locking for Link Control 2, which is used to manage Link speed (Ilpo Järvinen) - Extract Link Bandwidth Management Status check into pcie_lbms_seen(), where it can be shared between the bandwidth controller and quirks that use it to help retrain failed links (Ilpo Järvinen) - Re-add Link Bandwidth notification support with updates to address the reasons it was previously reverted (Alexandru Gagniuc, Ilpo Järvinen) - Add pcie_set_target_speed() and related functionality so drivers can manage PCIe Link speed based on thermal or other constraints (Ilpo Järvinen) - Add a thermal cooling driver to throttle PCIe Links via the existing thermal management framework (Ilpo Järvinen) - Add a userspace selftest for the PCIe bandwidth controller (Ilpo Järvinen) PCI device hotplug: - Add hotplug controller driver for Marvell OCTEON multi-function device where function 0 has a management console interface to enable/disable and provision various personalities for the other functions (Shijith Thotton) - Retain a reference to the pci_bus for the lifetime of a pci_slot to avoid a use-after-free when the thunderbolt driver resets USB4 host routers on boot, causing hotplug remove/add of downstream docks or other devices (Lukas Wunner) - Remove unused cpcihp struct cpci_hp_controller_ops.hardware_test (Guilherme Giacomo Simoes) - Remove unused cpqphp struct ctrl_dbg.ctrl (Christophe JAILLET) - Use pci_bus_read_dev_vendor_id() instead of hand-coded presence detection in cpqphp (Ilpo Järvinen) - Simplify cpqphp enumeration, which is already simple-minded and doesn't handle devices below hot-added bridges (Ilpo Järvinen) Virtualization: - Add ACS quirk for Wangxun FF5xxx NICs, which don't advertise an ACS capability but do isolate functions as though PCI_ACS_RR and PCI_ACS_CR were set, so the functions can be in independent IOMMU groups (Mengyuan Lou) TLP Processing Hints (TPH): - Add and document TLP Processing Hints (TPH) support so drivers can enable and disable TPH and the kernel can save/restore TPH configuration (Wei Huang) - Add TPH Steering Tag support so drivers can retrieve Steering Tag values associated with specific CPUs via an ACPI _DSM to improve performance by directing DMA writes closer to their consumers (Wei Huang) Data Object Exchange (DOE): - Wait up to 1 second for DOE Busy bit to clear before writing a request to the mailbox to avoid failures if the mailbox is still busy from a previous transfer (Gregory Price) Endpoint framework: - Skip attempts to allocate from endpoint controller memory window if the requested size is larger than the window (Damien Le Moal) - Add and document pci_epc_mem_map() and pci_epc_mem_unmap() to handle controller-specific size and alignment constraints, and add test cases to the endpoint test driver (Damien Le Moal) - Implement dwc pci_epc_ops.align_addr() so pci_epc_mem_map() can observe DWC-specific alignment requirements (Damien Le Moal) - Synchronously cancel command handler work in endpoint test before cleaning up DMA and BARs (Damien Le Moal) - Respect endpoint page size in dw_pcie_ep_align_addr() (Niklas Cassel) - Use dw_pcie_ep_align_addr() in dw_pcie_ep_raise_msi_irq() and dw_pcie_ep_raise_msix_irq() instead of open coding the equivalent (Niklas Cassel) - Avoid NULL dereference if Modem Host Interface Endpoint lacks 'mmio' DT property (Zhongqiu Han) - Release PCI domain ID of Endpoint controller parent (not controller itself) and before unregistering the controller, to avoid use-after-free (Zijun Hu) - Clear secondary (not primary) EPC in pci_epc_remove_epf() when removing the secondary controller associated with an NTB (Zijun Hu) Cadence PCIe controller driver: - Lower severity of 'phy-names' message (Bartosz Wawrzyniak) Freescale i.MX6 PCIe controller driver: - Fix suspend/resume support on i.MX6QDL, which has a hardware erratum that prevents use of L2 (Stefan Eichenberger) Intel VMD host bridge driver: - Add 0xb60b and 0xb06f Device IDs for client SKUs (Nirmal Patel) MediaTek PCIe Gen3 controller driver: - Update mediatek-gen3 DT binding to require the exact number of clocks for each SoC (Fei Shao) - Add support for DT 'max-link-speed' and 'num-lanes' properties to restrict the link speed and width (AngeloGioacchino Del Regno) Microchip PolarFlare PCIe controller driver: - Add DT and driver support for using either of the two PolarFire Root Ports (Conor Dooley) NVIDIA Tegra194 PCIe controller driver: - Move endpoint controller cleanups that depend on refclk from the host to the notifier that tells us the host has deasserted PERST#, when refclk should be valid (Manivannan Sadhasivam) Qualcomm PCIe controller driver: - Add qcom SAR2130P DT binding with an additional clock (Dmitry Baryshkov) - Enable MSI interrupts if 'global' IRQ is supported, since a previous commit unintentionally masked them (Manivannan Sadhasivam) - Move endpoint controller cleanups that depend on refclk from the host to the notifier that tells us the host has deasserted PERST#, when refclk should be valid (Manivannan Sadhasivam) - Add DT binding and driver support for IPQ9574, with Synopsys IP v5.80a and Qcom IP 1.27.0 (devi priya) - Move the OPP "operating-points-v2" table from the qcom,pcie-sm8450.yaml DT binding to qcom,pcie-common.yaml, where it can be used by other Qcom platforms (Qiang Yu) - Add 'global' SPI interrupt for events like link-up, link-down to qcom,pcie-x1e80100 DT binding so we can start enumeration when the link comes up (Qiang Yu) - Disable ASPM L0s for qcom,pcie-x1e80100 since the PHY is not tuned to support this (Qiang Yu) - Add ops_1_21_0 for SC8280X family SoC, which doesn't use the 'iommu-map' DT property and doesn't need BDF-to-SID translation (Qiang Yu) Rockchip PCIe controller driver: - Define ROCKCHIP_PCIE_AT_SIZE_ALIGN to replace magic 256 endpoint .align value (Damien Le Moal) - When unmapping an endpoint window, compute the region index instead of searching for it, and verify that the address was mapped (Damien Le Moal) - When mapping an endpoint window, verify that the address hasn't been mapped already (Damien Le Moal) - Implement pci_epc_ops.align_addr() for rockchip-ep (Damien Le Moal) - Fix MSI IRQ data mapping to observe the alignment constraint, which fixes intermittent page faults in memcpy_toio() and memcpy_fromio() (Damien Le Moal) - Rename rockchip_pcie_parse_ep_dt() to rockchip_pcie_ep_get_resources() for consistency with similar DT interfaces (Damien Le Moal) - Skip the unnecessary link train in rockchip_pcie_ep_probe() and do it only in the endpoint start operation (Damien Le Moal) - Implement pci_epc_ops.stop_link() to disable link training and controller configuration (Damien Le Moal) - Attempt link training at 5 GT/s when both partners support it (Damien Le Moal) - Add a handler for PERST# signal so we can detect host-initiated resets and start link training after PERST# is deasserted (Damien Le Moal) Synopsys DesignWare PCIe controller driver: - Clear outbound address on unmap so dw_pcie_find_index() won't match an ATU index that was already unmapped (Damien Le Moal) - Use of_property_present() instead of of_property_read_bool() when testing for presence of non-boolean DT properties (Rob Herring) - Advertise 1MB size if endpoint supports Resizable BARs, which was inadvertently lost in v6.11 (Niklas Cassel) TI J721E PCIe driver: - Add PCIe support for J722S SoC (Siddharth Vadapalli) - Delay PCIE_T_PVPERL_MS (100 ms), not just PCIE_T_PERST_CLK_US (100 us), before deasserting PERST# to ensure power and refclk are stable (Siddharth Vadapalli) TI Keystone PCIe controller driver: - Set the 'ti,keystone-pcie' mode so v3.65a devices work in Root Complex mode (Kishon Vijay Abraham I) - Try to avoid unrecoverable SError for attempts to issue config transactions when the link is down; this is racy but the best we can do (Kishon Vijay Abraham I) Miscellaneous: - Reorganize kerneldoc parameter names to match order in function signature (Julia Lawall) - Fix sysfs reset_method_store() memory leak (Todd Kjos) - Simplify pci_create_slot() (Ilpo Järvinen) - Fix incorrect printf format specifiers in pcitest (Luo Yifan)" * tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (127 commits) PCI: rockchip-ep: Handle PERST# signal in EP mode PCI: rockchip-ep: Improve link training PCI: rockship-ep: Implement the pci_epc_ops::stop_link() operation PCI: rockchip-ep: Refactor endpoint link training enable PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() MSI-X hiding PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() memory allocations PCI: rockchip-ep: Rename rockchip_pcie_parse_ep_dt() PCI: rockchip-ep: Fix MSI IRQ data mapping PCI: rockchip-ep: Implement the pci_epc_ops::align_addr() operation PCI: rockchip-ep: Improve rockchip_pcie_ep_map_addr() PCI: rockchip-ep: Improve rockchip_pcie_ep_unmap_addr() PCI: rockchip-ep: Use a macro to define EP controller .align feature PCI: rockchip-ep: Fix address translation unit programming PCI/pwrctrl: Rename pwrctrl functions and structures PCI/pwrctrl: Rename pwrctl files to pwrctrl PCI/pwrctl: Remove pwrctl device without iterating over all children of pwrctl parent PCI/pwrctl: Ensure that pwrctl drivers are probed before PCI client drivers PCI/pwrctl: Create pwrctl device only if at least one power supply is present PCI/pwrctl: Use of_platform_device_create() to create pwrctl devices tools: PCI: Fix incorrect printf format specifiers ...

thermal: Add PCIe cooling driver

2024-11-16T16:09:30+00:00

Add a thermal cooling driver to provide path to access PCIe bandwidth controller using the usual thermal interfaces. A cooling device is instantiated for controllable PCIe Ports from the bwctrl service driver. If registering the cooling device fails, allow bwctrl's probe to succeed regardless. As cdev in that case contains IS_ERR() pseudo "pointer", clean that up inside the probe function so the remove side doesn't need to suddenly make an odd looking IS_ERR() check. The thermal side state 0 means no throttling, i.e., maximum supported PCIe Link Speed. Link: https://lore.kernel.org/r/20241018144755.7875-9-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen [bhelgaas: dropped data->cdev test per https://lore.kernel.org/r/ZzRm1SJTwEMRsAr8@wunner.de] Signed-off-by: Bjorn Helgaas Reviewed-by: Jonathan Cameron Acked-by: Rafael J. Wysocki # From the cooling device interface perspective

thermal: core: Add user thresholds support

2024-10-10T21:33:37+00:00

The user thresholds mechanism is a way to have the userspace to tell the thermal framework to send a notification when a temperature limit is crossed. There is no id, no hysteresis, just the temperature and the direction of the limit crossing. That means we can be notified when a threshold is crossed the way up only, or the way down only or both ways. That allows to create hysteresis values if it is needed. A threshold can be added, deleted or flushed. The latter means all thresholds belonging to a thermal zone will be deleted. When a threshold is added: - if the same threshold (temperature and direction) exists, an error is returned - if a threshold is specified with the same temperature but a different direction, the specified direction is added - if there is no threshold with the same temperature then it is created When a threshold is deleted: - if the same threshold (temperature and direction) exists, it is deleted - if a threshold is specified with the same temperature but a different direction, the specified direction is removed - if there is no threshold with the same temperature, then an error is returned When the threshold are flushed: - All thresholds related to a thermal zone are deleted When a threshold is crossed: - the userspace does not need to know which threshold(s) have been crossed, it will be notified with the current temperature and the previous temperature - if multiple thresholds have been crossed between two updates only one notification will be send to the userspace, it is pointless to send a notification per thresholds crossed as the userspace can handle that easily when it has the temperature delta information Signed-off-by: Daniel Lezcano Link: https://patch.msgid.link/20240923100005.2532430-2-daniel.lezcano@linaro.org [ rjw: Subject edit, use BIT(0) and BIT(1) in symbol definitions ] Signed-off-by: Rafael J. Wysocki

thermal: Introduce a debugfs-based testing facility

2024-08-22T15:42:57+00:00

Introduce a facility allowing the thermal core functionality to be exercised in a controlled way in order to verify its behavior, without affecting its regular users noticeably. It is based on the idea of preparing thermal zone templates along with their trip points by writing to files in debugfs. When ready, those templates can be used for registering test thermal zones with the thermal core. The temperature of a test thermal zone created this way can be adjusted via debugfs, which also triggers a __thermal_zone_device_update() call for it. By manipulating the temperature of a test thermal zone, one can check if the thermal core reacts to the changes of it as expected. Signed-off-by: Rafael J. Wysocki Link: https://patch.msgid.link/6065927.lOV4Wx5bFT@rjwysocki.net [ rjw: Fixed ordering of kcalloc() arguments ] [ rjw: Fixed debugfs_create_dir() return value checks ] [ rjw: Fixed two kerneldoc comments ] Signed-off-by: Rafael J. Wysocki

thermal/drivers/renesas: Group all renesas thermal drivers together

2024-07-15T11:31:38+00:00

Move all Renesas thermal drivers to a vendor specific directory. All drivers are moved verbatim apart from the updated include path for thermal_hwmon.h. Signed-off-by: Niklas Söderlund Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20240506154011.344324-2-niklas.soderlund+renesas@ragnatech.se

thermal: Drop spaces before TABs

2024-03-11T16:14:46+00:00

There is never a need to have a space before a TAB, but it hurts the eyes of vim users. Signed-off-by: Geert Uytterhoeven Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/480478a53fd42621e97b2db36e181903cc0f53e3.1708001426.git.geert+renesas@glider.be

Merge tag 'thermal-6.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2024-01-17T22:47:33+00:00

Pull more thermal control updates from Rafael Wysocki: "These add support for debugfs-based diagnostics to the thermal core, simplify the thermal netlink API, fix system-wide PM support in the Intel HFI driver and clean up some code. Specifics: - Add debugfs-based diagnostics support to the thermal core (Daniel Lezcano, Dan Carpenter) - Fix a power allocator thermal governor issue preventing it from resetting cooling devices sometimes (Di Shen) - Simplify the thermal netlink API and clean up related code (Rafael J. Wysocki) - Make the Intel HFI driver support hibernation and deep suspend properly (Ricardo Neri)" * tag 'thermal-6.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal/debugfs: Unlock on error path in thermal_debug_tz_trip_up() thermal: intel: hfi: Add syscore callbacks for system-wide PM thermal: gov_power_allocator: avoid inability to reset a cdev thermal: helpers: Rearrange thermal_cdev_set_cur_state() thermal: netlink: Rework notify API for cooling devices thermal: core: Use kstrdup_const() during cooling device registration thermal/debugfs: Add thermal debugfs information for mitigation episodes thermal/debugfs: Add thermal cooling device debugfs information thermal: netlink: Pass thermal zone pointer to notify routines thermal: netlink: Drop thermal_notify_tz_trip_add/delete() thermal: netlink: Pass pointers to thermal_notify_tz_trip_up/down() thermal: netlink: Pass pointers to thermal_notify_tz_trip_change()

thermal/debugfs: Add thermal cooling device debugfs information

2024-01-12T14:34:56+00:00

The thermal framework does not have any debug information except a sysfs stat which is a bit controversial. This one allocates big chunks of memory for every cooling devices with a high number of states and could represent on some systems in production several megabytes of memory for just a portion of it. As the sysfs is limited to a page size, the output is not exploitable with large data array and gets truncated. The patch provides the same information than sysfs except the transitions are dynamically allocated, thus they won't show more events than the ones which actually occurred. There is no longer a size limitation and it opens the field for more debugging information where the debugfs is designed for, not sysfs. The thermal debugfs directory structure tries to stay consistent with the sysfs one but in a very simplified way: thermal/ -- cooling_devices |-- 0 | |-- clear | |-- time_in_state_ms | |-- total_trans | `-- trans_table |-- 1 | |-- clear | |-- time_in_state_ms | |-- total_trans | `-- trans_table |-- 2 | |-- clear | |-- time_in_state_ms | |-- total_trans | `-- trans_table |-- 3 | |-- clear | |-- time_in_state_ms | |-- total_trans | `-- trans_table `-- 4 |-- clear |-- time_in_state_ms |-- total_trans `-- trans_table The content of the files in the cooling devices directory is the same as the sysfs one except for the trans_table which has the following format: Transition Hits 1->0 246 0->1 246 2->1 632 1->2 632 3->2 98 2->3 98 Signed-off-by: Daniel Lezcano [ rjw: White space fixups, rebase ] Signed-off-by: Rafael J. Wysocki