kernel/linux.git/drivers/target, branch v6.12.93

scsi: target: iscsi: Fix CRC overread and double-free in iscsit_handle_text_cmd()

2026-06-09T10:26:04+00:00

[ Upstream commit 778c2ab142c625a8a8afa570e0f9b7873f445d99 ] Two latent bugs in the Text-phase handler, both present since the original LIO integration in commit e48354ce078c ("iscsi-target: Add iSCSI fabric support for target v4.1"): 1) DataDigest CRC buffer overread (4 bytes past text_in). text_in is kzalloc()'d at ALIGN(payload_length, 4). rx_size is then incremented by ISCSI_CRC_LEN to make room for the received DataDigest in the iovec, but the same (now-bumped) rx_size is passed as the buffer length to iscsit_crc_buf(): if (conn->conn_ops->DataDigest) { ... rx_size += ISCSI_CRC_LEN; } ... if (conn->conn_ops->DataDigest) { data_crc = iscsit_crc_buf(text_in, rx_size, 0, NULL); iscsit_crc_buf() walks rx_size bytes of text_in with crc32c(), so when DataDigest is negotiated it reads 4 bytes past the end of the text_in allocation. KASAN reproduces this directly on the unpatched mainline tree as slab-out-of-bounds in crc32c() called from the Text PDU path. The OOB bytes feed crc32c() and are then compared against the initiator-supplied checksum, so the value does not flow back to the attacker, but the kernel does read past the buffer on every Text PDU with DataDigest=CRC32C. Fix by passing the actual padded payload length (ALIGN(payload_length, 4)) that was used for the kzalloc(). 2) Stale cmd->text_in_ptr re-free (double-free) on ERL>0 bad DataDigest drop. On DataDigest mismatch with ErrorRecoveryLevel > 0 the handler silently drops the PDU and lets the initiator plug the CmdSN gap: kfree(text_in); return 0; cmd->text_in_ptr still points at the freed buffer. The next Text Request on the same ITT re-enters iscsit_setup_text_cmd(), which unconditionally does kfree(cmd->text_in_ptr); cmd->text_in_ptr = NULL; freeing the same pointer a second time. Session teardown via iscsit_release_cmd() has the same shape and hits the same double-free if the connection is dropped before a second Text Request arrives. On an unmodified mainline tree the bug-1 CRC overread fires first on the initial valid Text Request and perturbs the subsequent state, so #4 was isolated by building a kernel with only the bug-1 hunk of this patch applied plus temporary printk() observability around the three relevant kfree() sites. The observability prints are not part of this patch. On that build, a three-PDU Text Request sequence after login produces two back-to-back splats: BUG: KASAN: double-free in iscsit_setup_text_cmd+0x?? BUG: KASAN: double-free in iscsit_release_cmd+0x?? showing the same pointer freed in the ERL>0 drop path and again in iscsit_setup_text_cmd() (next Text Request on the same ITT) and once more in iscsit_release_cmd() (session teardown). On distro kernels with CONFIG_SLAB_FREELIST_HARDENED=y (default) the double-free becomes a remote kernel BUG(); on non-hardened kernels it corrupts the slab freelist. Fix by clearing cmd->text_in_ptr after the kfree() in the ERL>0 drop path. With both hunks applied #4 is directly observable on the stock tree without observability printks; fixing bug-1 alone would mask #4 less, not more, so the hunks are submitted together. Both fixes are one-liners. The Text PDU state machine is unchanged and the wire protocol is unaffected. Fixes: e48354ce078c ("iscsi-target: Add iSCSI fabric support for target v4.1") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito Tested-by: John Garry Reviewed-by: John Garry Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

scsi: target: iscsi: Validate CHAP_R length before base64 decode

2026-06-09T10:25:59+00:00

commit 85db7391310b1304d2dc8ae3b0b12105a9567147 upstream. chap_server_compute_hash() allocates client_digest as kzalloc(chap->digest_size) and then, for BASE64-encoded responses, passes chap_r directly to chap_base64_decode() without checking whether the input length could produce more than digest_size bytes of output. chap_base64_decode() writes to the destination unconditionally as long as there is input to consume. With MAX_RESPONSE_LENGTH set to 128 and the "0b" prefix stripped by extract_param(), up to 127 base64 characters can reach the decoder. 127 characters decode to 95 bytes. For SHA-256 (digest_size=32) this overflows client_digest by 63 bytes; for MD5 (digest_size=16) the overflow is 79 bytes. The length check at line 344 fires after the write has already happened. The HEX branch in the same switch statement already validates the length up front. Apply the same approach to the BASE64 branch: strip trailing base64 padding characters, then reject any input whose data length exceeds DIV_ROUND_UP(digest_size * 4, 3) before calling the decoder. Stripping trailing '=' before the comparison handles both padded and unpadded encodings. chap_base64_decode() already returns early on '=', so the full original string is still passed to the decoder unchanged. The mutual CHAP path decodes CHAP_C into initiatorchg_binhex, which is kzalloc(CHAP_CHALLENGE_STR_LEN). extract_param() caps initiatorchg at CHAP_CHALLENGE_STR_LEN characters, so at most CHAP_CHALLENGE_STR_LEN-1 base64 characters reach the decoder. The maximum decoded size, DIV_ROUND_UP((CHAP_CHALLENGE_STR_LEN-1) * 3, 4), is less than CHAP_CHALLENGE_STR_LEN, so no overflow is possible there. A comment is added at the call site to document this. Fixes: 1e5733883421 ("scsi: target: iscsi: Support base64 in CHAP") Cc: stable@vger.kernel.org Signed-off-by: Alexandru Hossu Reviewed-by: David Disseldorp Link: https://patch.msgid.link/20260521151121.808477-1-hossu.alexandru@gmail.com Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

scsi: target: iscsi: Bound iscsi_encode_text_output() appends to rsp_buf

2026-06-09T10:25:59+00:00

commit bf33e01f88388c43e285492a63e539df6ffed64c upstream. iscsi_encode_text_output() concatenates "key=value\0" records into login->rsp_buf, an 8192-byte kzalloc(MAX_KEY_VALUE_PAIRS) buffer allocated in iscsit_alloc_login_setup_buffer(). The three sprintf() call sites in this function (lines 1398, 1411, 1424 in v7.1-rc2) never check the remaining buffer capacity: *length += sprintf(output_buf, "%s=%s", er->key, er->value); *length += 1; output_buf = textbuf + *length; The 8192-byte ceiling at iscsi_target_check_login_request() bounds the *input* Login PDU payload, but a single PDU can carry up to 2048 minimal four-byte "a=b\0" pairs, each unknown key expanding to a 16-byte "a=NotUnderstood\0" output record via iscsi_add_notunderstood_response(). 2048 * 16 = 32 KiB of output into an 8 KiB buffer, producing a ~24 KiB heap overrun in the kmalloc-8k slab. The fix introduces a static iscsi_encode_text_record() helper that uses snprintf() with a per-call bounds check against the remaining buffer, and threads a u32 textbuf_size parameter through iscsi_encode_text_output(). Both call sites in iscsi_target_handle_csg_zero() (PHASE_SECURITY) and iscsi_target_handle_csg_one() (PHASE_OPERATIONAL) pass MAX_KEY_VALUE_PAIRS. On overflow the encoder logs the condition, calls iscsi_release_extra_responses() to drop queued records, and returns -1; both caller sites now emit ISCSI_STATUS_CLS_INITIATOR_ERR / ISCSI_LOGIN_STATUS_INIT_ERR via iscsit_tx_login_rsp() before returning, so the initiator sees an explicit failed-login response rather than a silent connection drop. (Prior to this patch only the PHASE_OPERATIONAL caller did that; the PHASE_SECURITY caller is converted to the same shape.) Fixes: e48354ce078c ("iscsi-target: Add iSCSI fabric support for target v4.1") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito Tested-by: John Garry Reviewed-by: John Garry Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

scsi: target: core: Fix integer overflow in UNMAP bounds check

2026-05-23T11:04:45+00:00

[ Upstream commit 2bf2d65f76697820dbc4227d13866293576dd90a ] sbc_execute_unmap() checks LBA + range does not exceed the device capacity, but does not guard against LBA + range wrapping around on 64-bit overflow. Add an overflow check matching the pattern already used for WRITE_SAME in the same file. Fixes: 86d7182985d2 ("target: Add sbc_execute_unmap() helper") Reported-by: Yuhao Jiang Signed-off-by: Junrui Luo Link: https://patch.msgid.link/SYBPR01MB7881593C61AD52C69FBDB0BDAF7CA@SYBPR01MB7881.ausprd01.prod.outlook.com Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: target: configfs: Bound snprintf() return in tg_pt_gp_members_show()

2026-05-14T13:29:16+00:00

commit 772a896a56e0e3ef9424a025cec9176f9d8f4552 upstream. target_tg_pt_gp_members_show() formats LUN paths with snprintf() into a 256-byte stack buffer, then will memcpy() cur_len bytes from that buffer. snprintf() returns the length the output would have had, which can exceed the buffer size when the fabric WWN is long because iSCSI IQN names can be up to 223 bytes. The check at the memcpy() site only guards the destination page write, not the source read, so memcpy() will read past the stack buffer and copy adjacent stack contents to the sysfs reader, which when CONFIG_FORTIFY_SOURCE is enabled, fortify_panic() will be triggered. Commit 27e06650a5ea ("scsi: target: target_core_configfs: Add length check to avoid buffer overflow") added the same bound to the target_lu_gp_members_show() but the tg_pt_gp variant was missed so resolve that here. Cc: Martin K. Petersen Fixes: c66ac9db8d4a ("[SCSI] target: Add LIO target core v4.0.0-rc6") Assisted-by: gregkh_clanker_t1000 Signed-off-by: Greg Kroah-Hartman Link: https://patch.msgid.link/2026041159-garter-theft-3be0@gregkh Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

scsi: target: tcm_loop: Drain commands in target_reset handler

2026-04-11T12:24:52+00:00

[ Upstream commit 1333eee56cdf3f0cf67c6ab4114c2c9e0a952026 ] tcm_loop_target_reset() violates the SCSI EH contract: it returns SUCCESS without draining any in-flight commands. The SCSI EH documentation (scsi_eh.rst) requires that when a reset handler returns SUCCESS the driver has made lower layers "forget about timed out scmds" and is ready for new commands. Every other SCSI LLD (virtio_scsi, mpt3sas, ipr, scsi_debug, mpi3mr) enforces this by draining or completing outstanding commands before returning SUCCESS. Because tcm_loop_target_reset() doesn't drain, the SCSI EH reuses in-flight scsi_cmnd structures for recovery commands (e.g. TUR) while the target core still has async completion work queued for the old se_cmd. The memset in queuecommand zeroes se_lun and lun_ref_active, causing transport_lun_remove_cmd() to skip its percpu_ref_put(). The leaked LUN reference prevents transport_clear_lun_ref() from completing, hanging configfs LUN unlink forever in D-state: INFO: task rm:264 blocked for more than 122 seconds. rm D 0 264 258 0x00004000 Call Trace: __schedule+0x3d0/0x8e0 schedule+0x36/0xf0 transport_clear_lun_ref+0x78/0x90 [target_core_mod] core_tpg_remove_lun+0x28/0xb0 [target_core_mod] target_fabric_port_unlink+0x50/0x60 [target_core_mod] configfs_unlink+0x156/0x1f0 [configfs] vfs_unlink+0x109/0x290 do_unlinkat+0x1d5/0x2d0 Fix this by making tcm_loop_target_reset() actually drain commands: 1. Issue TMR_LUN_RESET via tcm_loop_issue_tmr() to drain all commands that the target core knows about (those not yet CMD_T_COMPLETE). 2. Use blk_mq_tagset_busy_iter() to iterate all started requests and flush_work() on each se_cmd — this drains any deferred completion work for commands that already had CMD_T_COMPLETE set before the TMR (which the TMR skips via __target_check_io_state()). This is the same pattern used by mpi3mr, scsi_debug, and libsas to drain outstanding commands during reset. Fixes: e0eb5d38b732 ("scsi: target: tcm_loop: Use block cmd allocator for se_cmds") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-6 Signed-off-by: Josef Bacik Link: https://patch.msgid.link/27011aa34c8f6b1b94d2e3cf5655b6d037f53428.1773706803.git.josef@toxicpanda.com Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

scsi: target: Fix recursive locking in __configfs_open_file()

2026-03-13T16:20:35+00:00

commit 14d4ac19d1895397532eec407433c5d74d9da53b upstream. In flush_write_buffer, &p->frag_sem is acquired and then the loaded store function is called, which, here, is target_core_item_dbroot_store(). This function called filp_open(), following which these functions were called (in reverse order), according to the call trace: down_read __configfs_open_file do_dentry_open vfs_open do_open path_openat do_filp_open file_open_name filp_open target_core_item_dbroot_store flush_write_buffer configfs_write_iter target_core_item_dbroot_store() tries to validate the new file path by trying to open the file path provided to it; however, in this case, the bug report shows: db_root: not a directory: /sys/kernel/config/target/dbroot indicating that the same configfs file was tried to be opened, on which it is currently working on. Thus, it is trying to acquire frag_sem semaphore of the same file of which it already holds the semaphore obtained in flush_write_buffer(), leading to acquiring the semaphore in a nested manner and a possibility of recursive locking. Fix this by modifying target_core_item_dbroot_store() to use kern_path() instead of filp_open() to avoid opening the file using filesystem-specific function __configfs_open_file(), and further modifying it to make this fix compatible. Reported-by: syzbot+f6e8174215573a84b797@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=f6e8174215573a84b797 Tested-by: syzbot+f6e8174215573a84b797@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by: Prithvi Tambewagh Reviewed-by: Dmitry Bogdanov Link: https://patch.msgid.link/20260216062002.61937-1-activprithvi@gmail.com Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

scsi: target: iscsi: Fix use-after-free in iscsit_dec_conn_usage_count()

2026-02-11T12:40:23+00:00

[ Upstream commit 9411a89e9e7135cc459178fa77a3f1d6191ae903 ] In iscsit_dec_conn_usage_count(), the function calls complete() while holding the conn->conn_usage_lock. As soon as complete() is invoked, the waiter (such as iscsit_close_connection()) may wake up and proceed to free the iscsit_conn structure. If the waiter frees the memory before the current thread reaches spin_unlock_bh(), it results in a KASAN slab-use-after-free as the function attempts to release a lock within the already-freed connection structure. Fix this by releasing the spinlock before calling complete(). Signed-off-by: Maurizio Lombardi Reported-by: Zhaojuan Guo Reviewed-by: Mike Christie Link: https://patch.msgid.link/20260112165352.138606-2-mlombard@redhat.com Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: target: iscsi: Fix use-after-free in iscsit_dec_session_usage_count()

2026-02-11T12:40:23+00:00

[ Upstream commit 84dc6037390b8607c5551047d3970336cb51ba9a ] In iscsit_dec_session_usage_count(), the function calls complete() while holding the sess->session_usage_lock. Similar to the connection usage count logic, the waiter signaled by complete() (e.g., in the session release path) may wake up and free the iscsit_session structure immediately. This creates a race condition where the current thread may attempt to execute spin_unlock_bh() on a session structure that has already been deallocated, resulting in a KASAN slab-use-after-free. To resolve this, release the session_usage_lock before calling complete() to ensure all dereferences of the sess pointer are finished before the waiter is allowed to proceed with deallocation. Signed-off-by: Maurizio Lombardi Reported-by: Zhaojuan Guo Reviewed-by: Mike Christie Link: https://patch.msgid.link/20260112165352.138606-3-mlombard@redhat.com Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: firewire: sbp-target: Fix overflow in sbp_make_tpg()

2026-02-06T15:55:43+00:00

[ Upstream commit b2d6b1d443009ed4da2d69f5423ab38e5780505a ] The code in sbp_make_tpg() limits "tpgt" to UINT_MAX but the data type of "tpg->tport_tpgt" is u16. This causes a type truncation issue. When a user creates a TPG via configfs mkdir, for example: mkdir /sys/kernel/config/target/sbp//tpgt_70000 The value 70000 passes the "tpgt > UINT_MAX" check since 70000 is far less than 4294967295. However, when assigned to the u16 field tpg->tport_tpgt, the value is silently truncated to 4464 (70000 & 0xFFFF). This causes the value the user specified to differ from what is actually stored, leading to confusion and potential unexpected behavior. Fix this by changing the type of "tpgt" to u16 and using kstrtou16() which will properly reject values outside the u16 range. Fixes: a511ce339780 ("sbp-target: Initial merge of firewire/ieee-1394 target mode support") Signed-off-by: Kery Qi Link: https://patch.msgid.link/20260121114515.1829-2-qikeyu2017@gmail.com Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin