kernel/linux.git/drivers/target, branch v4.19.77

scsi: target/iblock: Fix overrun in WRITE SAME emulation

2019-09-16T06:22:17+00:00

[ Upstream commit 5676234f20fef02f6ca9bd66c63a8860fce62645 ] WRITE SAME corrupts data on the block device behind iblock if the command is emulated. The emulation code issues (M - 1) * N times more bios than requested, where M is the number of 512 blocks per real block size and N is the NUMBER OF LOGICAL BLOCKS specified in WRITE SAME command. So, for a device with 4k blocks, 7 * N more LBAs gets written after the requested range. The issue happens because the number of 512 byte sectors to be written is decreased one by one while the real bios are typically from 1 to 8 512 byte sectors per bio. Fixes: c66ac9db8d4a ("[SCSI] target: Add LIO target core v4.0.0-rc6") Cc: Signed-off-by: Roman Bolshakov Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: target/core: Use the SECTOR_SHIFT constant

2019-09-16T06:22:16+00:00

[ Upstream commit 80b045b385cfef10939c913fbfeb19ce5491c1f2 ] Instead of duplicating the SECTOR_SHIFT definition from , use it. This patch does not change any functionality. Reviewed-by: Christoph Hellwig Cc: Nicholas Bellinger Cc: Mike Christie Cc: Hannes Reinecke Signed-off-by: Bart Van Assche Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: target: tcmu: avoid use-after-free after command timeout

2019-09-10T09:33:45+00:00

[ Upstream commit a86a75865ff4d8c05f355d1750a5250aec89ab15 ] In tcmu_handle_completion() function, the variable called read_len is always initialized with a value taken from se_cmd structure. If this function is called to complete an expired (timed out) out command, the session command pointed by se_cmd is likely to be already deallocated by the target core at that moment. As the result, this access triggers a use-after-free warning from KASAN. This patch fixes the code not to touch se_cmd when completing timed out TCMU commands. It also resets the pointer to se_cmd at the time when the TCMU_CMD_BIT_EXPIRED flag is set because it is going to become invalid after calling target_complete_cmd() later in the same function, tcmu_check_expired_cmd(). Signed-off-by: Dmitry Fomichev Acked-by: Mike Christie Reviewed-by: Damien Le Moal Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: iscsi: set auth_protocol back to NULL if CHAP_A value is not supported

2019-07-26T07:13:56+00:00

[ Upstream commit 5dd6c49339126c2c8df2179041373222362d6e49 ] If the CHAP_A value is not supported, the chap_server_open() function should free the auth_protocol pointer and set it to NULL, or we will leave a dangling pointer around. [ 66.010905] Unsupported CHAP_A value [ 66.011660] Security negotiation failed. [ 66.012443] iSCSI Login negotiation failed. [ 68.413924] general protection fault: 0000 [#1] SMP PTI [ 68.414962] CPU: 0 PID: 1562 Comm: targetcli Kdump: loaded Not tainted 4.18.0-80.el8.x86_64 #1 [ 68.416589] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 68.417677] RIP: 0010:__kmalloc_track_caller+0xc2/0x210 Signed-off-by: Maurizio Lombardi Reviewed-by: Chris Leech Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: tcmu: fix use after free

2019-07-10T07:53:45+00:00

[ Upstream commit 40d883b091758472c79b81fa1c0e0347e24a9cff ] Fixes: a94a2572b977 ("scsi: tcmu: avoid cmd/qfull timers updated whenever a new cmd comes") Reported-by: Dan Carpenter Cc: Mike Christie Signed-off-by: Xiubo Li Reviewed-by: Mike Christie Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: target/iscsi: Avoid iscsit_release_commands_from_conn() deadlock

2019-03-23T19:09:59+00:00

commit 32e36bfbcf31452a854263e7c7f32fbefc4b44d8 upstream. When using SCSI passthrough in combination with the iSCSI target driver then cmd->t_state_lock may be obtained from interrupt context. Hence, all code that obtains cmd->t_state_lock from thread context must disable interrupts first. This patch avoids that lockdep reports the following: WARNING: inconsistent lock state 4.18.0-dbg+ #1 Not tainted -------------------------------- inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. iscsi_ttx/1800 [HC1[1]:SC0[2]:HE0:SE0] takes: 000000006e7b0ceb (&(&cmd->t_state_lock)->rlock){?...}, at: target_complete_cmd+0x47/0x2c0 [target_core_mod] {HARDIRQ-ON-W} state was registered at: lock_acquire+0xd2/0x260 _raw_spin_lock+0x32/0x50 iscsit_close_connection+0x97e/0x1020 [iscsi_target_mod] iscsit_take_action_for_connection_exit+0x108/0x200 [iscsi_target_mod] iscsi_target_rx_thread+0x180/0x190 [iscsi_target_mod] kthread+0x1cf/0x1f0 ret_from_fork+0x24/0x30 irq event stamp: 1281 hardirqs last enabled at (1279): [] __local_bh_enable_ip+0xa9/0x160 hardirqs last disabled at (1281): [] interrupt_entry+0xb5/0xd0 softirqs last enabled at (1278): [] lock_sock_nested+0x51/0xc0 softirqs last disabled at (1280): [] ip6_finish_output2+0x124/0xe40 [ipv6] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&cmd->t_state_lock)->rlock); lock(&(&cmd->t_state_lock)->rlock);

scsi: tcmu: avoid cmd/qfull timers updated whenever a new cmd comes

2019-02-27T09:08:55+00:00

[ Upstream commit a94a2572b97744d3a35a1996df0e5cf6b2461a4a ] Currently there is one cmd timeout timer and one qfull timer for each udev, and whenever any new command is coming in we will update the cmd timer or qfull timer. For some corner cases the timers are always working only for the ringbuffer's and full queue's newest cmd. That's to say the timer won't be fired even if one cmd has been stuck for a very long time and the deadline is reached. This fix will keep the cmd/qfull timers to be pended for the oldest cmd in ringbuffer and full queue, and will update them with the next cmd's deadline only when the old cmd's deadline is reached or removed from the ringbuffer and full queue. Signed-off-by: Xiubo Li Acked-by: Mike Christie Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: target/core: Use kmem_cache_free() instead of kfree()

2019-02-23T08:07:26+00:00

commit 8b2db98e814a5ec45e8800fc22ca9000ae0a517b upstream. memory allocated by kmem_cache_alloc() should be freed using kmem_cache_free(), not kfree(). Fixes: ad669505c4e9 ("scsi: target/core: Make sure that target_wait_for_sess_cmds() waits long enough") Signed-off-by: Wei Yongjun Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

scsi: target/core: Make sure that target_wait_for_sess_cmds() waits long enough

2019-01-26T08:32:38+00:00

[ Upstream commit ad669505c4e9db9af9faeb5c51aa399326a80d91 ] A session must only be released after all code that accesses the session structure has finished. Make sure that this is the case by introducing a new command counter per session that is only decremented after the .release_cmd() callback has finished. This patch fixes the following crash: BUG: KASAN: use-after-free in do_raw_spin_lock+0x1c/0x130 Read of size 4 at addr ffff8801534b16e4 by task rmdir/14805 CPU: 16 PID: 14805 Comm: rmdir Not tainted 4.18.0-rc2-dbg+ #5 Call Trace: dump_stack+0xa4/0xf5 print_address_description+0x6f/0x270 kasan_report+0x241/0x360 __asan_load4+0x78/0x80 do_raw_spin_lock+0x1c/0x130 _raw_spin_lock_irqsave+0x52/0x60 srpt_set_ch_state+0x27/0x70 [ib_srpt] srpt_disconnect_ch+0x1b/0xc0 [ib_srpt] srpt_close_session+0xa8/0x260 [ib_srpt] target_shutdown_sessions+0x170/0x180 [target_core_mod] core_tpg_del_initiator_node_acl+0xf3/0x200 [target_core_mod] target_fabric_nacl_base_release+0x25/0x30 [target_core_mod] config_item_release+0x9c/0x110 [configfs] config_item_put+0x26/0x30 [configfs] configfs_rmdir+0x3b8/0x510 [configfs] vfs_rmdir+0xb3/0x1e0 do_rmdir+0x262/0x2c0 do_syscall_64+0x77/0x230 entry_SYSCALL_64_after_hwframe+0x49/0xbe Cc: Nicholas Bellinger Cc: Mike Christie Cc: Christoph Hellwig Cc: David Disseldorp Cc: Hannes Reinecke Signed-off-by: Bart Van Assche Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: target: use consistent left-aligned ASCII INQUIRY data

2019-01-26T08:32:38+00:00

[ Upstream commit 0de263577de5d5e052be5f4f93334e63cc8a7f0b ] spc5r17.pdf specifies: 4.3.1 ASCII data field requirements ASCII data fields shall contain only ASCII printable characters (i.e., code values 20h to 7Eh) and may be terminated with one or more ASCII null (00h) characters. ASCII data fields described as being left-aligned shall have any unused bytes at the end of the field (i.e., highest offset) and the unused bytes shall be filled with ASCII space characters (20h). LIO currently space-pads the T10 VENDOR IDENTIFICATION and PRODUCT IDENTIFICATION fields in the standard INQUIRY data. However, the PRODUCT REVISION LEVEL field in the standard INQUIRY data as well as the T10 VENDOR IDENTIFICATION field in the INQUIRY Device Identification VPD Page are zero-terminated/zero-padded. Fix this inconsistency by using space-padding for all of the above fields. Signed-off-by: David Disseldorp Reviewed-by: Christoph Hellwig Reviewed-by: Bryant G. Ly Reviewed-by: Lee Duncan Reviewed-by: Hannes Reinecke Reviewed-by: Roman Bolshakov Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin