kernel/linux.git/drivers/target, branch v4.14.217

scsi: target: Fix XCOPY NAA identifier lookup

2021-01-12T19:09:14+00:00

commit 2896c93811e39d63a4d9b63ccf12a8fbc226e5e4 upstream. When attempting to match EXTENDED COPY CSCD descriptors with corresponding se_devices, target_xcopy_locate_se_dev_e4() currently iterates over LIO's global devices list which includes all configured backstores. This change ensures that only initiator-accessible backstores are considered during CSCD descriptor lookup, according to the session's se_node_acl LUN list. To avoid LUN removal race conditions, device pinning is changed from being configfs based to instead using the se_node_acl lun_ref. Reference: CVE-2020-28374 Fixes: cbf031f425fd ("target: Add support for EXTENDED_COPY copy offload emulation") Reviewed-by: Lee Duncan Signed-off-by: David Disseldorp Signed-off-by: Mike Christie Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

scsi: target: iscsi: Fix cmd abort fabric stop race

2020-12-02T07:34:42+00:00

[ Upstream commit f36199355c64a39fe82cfddc7623d827c7e050da ] Maurizio found a race where the abort and cmd stop paths can race as follows: 1. thread1 runs iscsit_release_commands_from_conn and sets CMD_T_FABRIC_STOP. 2. thread2 runs iscsit_aborted_task and then does __iscsit_free_cmd. It then returns from the aborted_task callout and we finish target_handle_abort and do: target_handle_abort -> transport_cmd_check_stop_to_fabric -> lio_check_stop_free -> target_put_sess_cmd The cmd is now freed. 3. thread1 now finishes iscsit_release_commands_from_conn and runs iscsit_free_cmd while accessing a command we just released. In __target_check_io_state we check for CMD_T_FABRIC_STOP and set the CMD_T_ABORTED if the driver is not cleaning up the cmd because of a session shutdown. However, iscsit_release_commands_from_conn only sets the CMD_T_FABRIC_STOP and does not check to see if the abort path has claimed completion ownership of the command. This adds a check in iscsit_release_commands_from_conn so only the abort or fabric stop path cleanup the command. Link: https://lore.kernel.org/r/1605318378-9269-1-git-send-email-michael.christie@oracle.com Reported-by: Maurizio Lombardi Reviewed-by: Maurizio Lombardi Signed-off-by: Mike Christie Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: target: iscsi: Fix hang in iscsit_access_np() when getting tpg->np_login_sem

2020-09-23T08:46:30+00:00

commit ed43ffea78dcc97db3f561da834f1a49c8961e33 upstream. The iSCSI target login thread might get stuck with the following stack: cat /proc/`pidof iscsi_np`/stack [<0>] down_interruptible+0x42/0x50 [<0>] iscsit_access_np+0xe3/0x167 [<0>] iscsi_target_locate_portal+0x695/0x8ac [<0>] __iscsi_target_login_thread+0x855/0xb82 [<0>] iscsi_target_login_thread+0x2f/0x5a [<0>] kthread+0xfa/0x130 [<0>] ret_from_fork+0x1f/0x30 This can be reproduced via the following steps: 1. Initiator A tries to log in to iqn1-tpg1 on port 3260. After finishing PDU exchange in the login thread and before the negotiation is finished the the network link goes down. At this point A has not finished login and tpg->np_login_sem is held. 2. Initiator B tries to log in to iqn2-tpg1 on port 3260. After finishing PDU exchange in the login thread the target expects to process remaining login PDUs in workqueue context. 3. Initiator A' tries to log in to iqn1-tpg1 on port 3260 from a new socket. A' will wait for tpg->np_login_sem with np->np_login_timer loaded to wait for at most 15 seconds. The lock is held by A so A' eventually times out. 4. Before A' got timeout initiator B gets negotiation failed and calls iscsi_target_login_drop()->iscsi_target_login_sess_out(). The np->np_login_timer is canceled and initiator A' will hang forever. Because A' is now in the login thread, no new login requests can be serviced. Fix this by moving iscsi_stop_login_thread_timer() out of iscsi_target_login_sess_out(). Also remove iscsi_np parameter from iscsi_target_login_sess_out(). Link: https://lore.kernel.org/r/20200729130343.24976-1-houpu@bytedance.com Cc: stable@vger.kernel.org Reviewed-by: Mike Christie Signed-off-by: Hou Pu Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

scsi: target: iscsi: Fix data digest calculation

2020-09-23T08:46:30+00:00

commit 5528d03183fe5243416c706f64b1faa518b05130 upstream. Current code does not consider 'page_off' in data digest calculation. To fix this, add a local variable 'first_sg' and set first_sg.offset to sg->offset + page_off. Link: https://lore.kernel.org/r/1598358910-3052-1-git-send-email-varun@chelsio.com Fixes: e48354ce078c ("iscsi-target: Add iSCSI fabric support for target v4.1") Cc: Reviewed-by: Mike Christie Signed-off-by: Varun Prakash Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

scsi: target: tcmu: Fix crash on ARM during cmd completion

2020-09-03T09:22:25+00:00

[ Upstream commit 5a0c256d96f020e4771f6fd5524b80f89a2d3132 ] If tcmu_handle_completions() has to process a padding shorter than sizeof(struct tcmu_cmd_entry), the current call to tcmu_flush_dcache_range() with sizeof(struct tcmu_cmd_entry) as length param is wrong and causes crashes on e.g. ARM, because tcmu_flush_dcache_range() in this case calls flush_dcache_page(vmalloc_to_page(start)); with start being an invalid address above the end of the vmalloc'ed area. The fix is to use the minimum of remaining ring space and sizeof(struct tcmu_cmd_entry) as the length param. The patch was tested on kernel 4.19.118. See https://bugzilla.kernel.org/show_bug.cgi?id=208045#c10 Link: https://lore.kernel.org/r/20200629093756.8947-1-bstroesser@ts.fujitsu.com Tested-by: JiangYu Acked-by: Mike Christie Signed-off-by: Bodo Stroesser Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: target/iblock: fix WRITE SAME zeroing

2020-05-05T17:15:52+00:00

commit 1d2ff149b263c9325875726a7804a0c75ef7112e upstream. SBC4 specifies that WRITE SAME requests with the UNMAP bit set to zero "shall perform the specified write operation to each LBA specified by the command". Commit 2237498f0b5c ("target/iblock: Convert WRITE_SAME to blkdev_issue_zeroout") modified the iblock backend to call blkdev_issue_zeroout() when handling WRITE SAME requests with UNMAP=0 and a zero data segment. The iblock blkdev_issue_zeroout() call incorrectly provides a flags parameter of 0 (bool false), instead of BLKDEV_ZERO_NOUNMAP. The bool false parameter reflects the blkdev_issue_zeroout() API prior to commit ee472d835c26 ("block: add a flags argument to (__)blkdev_issue_zeroout") which was merged shortly before 2237498f0b5c. Link: https://lore.kernel.org/r/20200419163109.11689-1-ddiss@suse.de Fixes: 2237498f0b5c ("target/iblock: Convert WRITE_SAME to blkdev_issue_zeroout") Reviewed-by: Bart Van Assche Signed-off-by: David Disseldorp Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

scsi: target: fix PR IN / READ FULL STATUS for FC

2020-05-02T15:24:43+00:00

[ Upstream commit 8fed04eb79a74cbf471dfaa755900a51b37273ab ] Creation of the response to READ FULL STATUS fails for FC based reservations. Reason is the too high loop limit (< 24) in fc_get_pr_transport_id(). The string representation of FC WWPN is 23 chars long only ("11:22:33:44:55:66:77:88"). So when i is 23, the loop body is executed a last time for the ending '\0' of the string and thus hex2bin() reports an error. Link: https://lore.kernel.org/r/20200408132610.14623-3-bstroesser@ts.fujitsu.com Signed-off-by: Bodo Stroesser Reviewed-by: Mike Christie Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: target: fix hang when multiple threads try to destroy the same iscsi session

2020-04-24T06:00:58+00:00

[ Upstream commit 57c46e9f33da530a2485fa01aa27b6d18c28c796 ] A number of hangs have been reported against the target driver; they are due to the fact that multiple threads may try to destroy the iscsi session at the same time. This may be reproduced for example when a "targetcli iscsi/iqn.../tpg1 disable" command is executed while a logout operation is underway. When this happens, two or more threads may end up sleeping and waiting for iscsit_close_connection() to execute "complete(session_wait_comp)". Only one of the threads will wake up and proceed to destroy the session structure, the remaining threads will hang forever. Note that if the blocked threads are somehow forced to wake up with complete_all(), they will try to free the same iscsi session structure destroyed by the first thread, causing double frees, memory corruptions etc... With this patch, the threads that want to destroy the iscsi session will increase the session refcount and will set the "session_close" flag to 1; then they wait for the driver to close the remaining active connections. When the last connection is closed, iscsit_close_connection() will wake up all the threads and will wait for the session's refcount to reach zero; when this happens, iscsit_close_connection() will destroy the session structure because no one is referencing it anymore. INFO: task targetcli:5971 blocked for more than 120 seconds. Tainted: P OE 4.15.0-72-generic #81~16.04.1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. targetcli D 0 5971 1 0x00000080 Call Trace: __schedule+0x3d6/0x8b0 ? vprintk_func+0x44/0xe0 schedule+0x36/0x80 schedule_timeout+0x1db/0x370 ? __dynamic_pr_debug+0x8a/0xb0 wait_for_completion+0xb4/0x140 ? wake_up_q+0x70/0x70 iscsit_free_session+0x13d/0x1a0 [iscsi_target_mod] iscsit_release_sessions_for_tpg+0x16b/0x1e0 [iscsi_target_mod] iscsit_tpg_disable_portal_group+0xca/0x1c0 [iscsi_target_mod] lio_target_tpg_enable_store+0x66/0xe0 [iscsi_target_mod] configfs_write_file+0xb9/0x120 __vfs_write+0x1b/0x40 vfs_write+0xb8/0x1b0 SyS_write+0x5c/0xe0 do_syscall_64+0x73/0x130 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Link: https://lore.kernel.org/r/20200313170656.9716-3-mlombard@redhat.com Reported-by: Matt Coleman Tested-by: Matt Coleman Tested-by: Rahul Kundu Signed-off-by: Maurizio Lombardi Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: target: remove boilerplate code

2020-04-24T06:00:58+00:00

[ Upstream commit e49a7d994379278d3353d7ffc7994672752fb0ad ] iscsit_free_session() is equivalent to iscsit_stop_session() followed by a call to iscsit_close_session(). Link: https://lore.kernel.org/r/20200313170656.9716-2-mlombard@redhat.com Tested-by: Rahul Kundu Signed-off-by: Maurizio Lombardi Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: Revert "target: iscsi: Wait for all commands to finish before freeing a session"

2020-02-28T15:36:15+00:00

commit 807b9515b7d044cf77df31f1af9d842a76ecd5cb upstream. Since commit e9d3009cb936 introduced a regression and since the fix for that regression was not perfect, revert this commit. Link: https://marc.info/?l=target-devel&m=158157054906195 Cc: Rahul Kundu Cc: Mike Marciniszyn Cc: Sagi Grimberg Reported-by: Dakshaja Uppalapati Fixes: e9d3009cb936 ("scsi: target: iscsi: Wait for all commands to finish before freeing a session") Signed-off-by: Bart Van Assche Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman